Question about 1994 Jeep Grand Cherokee

2 Answers

94 jeep grand cheroke

Built in security will not allow vehical to start need to find wiring diagram to solve this problem

Posted by on

  • 2 more comments 
  • natashacbk Jul 12, 2008

    How do we disengage the alarm system in our 99 jeep sport..the remotes aren't working properly and the alarm system is really annoying anyway..Can I just shut it off-PERMANENTLY?

  • tac77 Jul 31, 2008

    I have the same problem. When I turn the key, I get nothing. The battery, alt and everything has been double checked. I even rset the remote and it stil will not start.

    Suggestions please. I have not removed the module yet

  • bginsel Dec 18, 2008

    this is a 93 grand cherokee and it turns over fine but wont fire the ignition or fuel, im not sure yet which one is the problem. if i had a diagram im sure i can fix it. but everyone wants money and i have none at this time to download maybe even the wrong diagram.

  • niki59 Mar 25, 2009

    the built in security wont let jeep start since battery was disconnected then reconnected?? i have no clue how to reset or by pass the problem?? have no owners manual, what do i do???



2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.


    An expert whose answer got voted for 20 times.


    An expert who has answered 20 questions.

  • Expert
  • 44 Answers

If you remove the glove box you will find the alarm module behind it next to a relay box. If you unplug the module the Jeep should start.

Posted on May 21, 2008

  • Level 1:

    An expert who has achieved level 1.


    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

The way you disarm the factory automatic security on a Grand Cherokee is to stick the key in the door and turn it like you are unlocking the door. Voila!!! The alarm system/security system is turned off until the next time you either lock the door or lose battery power. Then repeat the above...

Posted on Apr 16, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I have a 94 jeep cheroke SE with the 4.0 and aw4 transmission with tps backfeed of 4.2 volts

have you tried starting in low and shift manually? aw4 transmission , is that all the time 4x4

Aug 13, 2017 | Jeep Cherokee Cars & Trucks

2 Answers

Why wont it start

Your key fob is broken most likely and will need replaced at the dealer. The vehicle and new key will need to be there for programming. The security system is not reading the key.

Jul 06, 2014 | 2009 Jeep Grand Cherokee

1 Answer

Grand cheroke auto dim mirrior (all there all the time)
click ZJ here.
then power mirror then click wiring.
bingo x2

Apr 24, 2014 | 1996 Jeep Grand Cherokee

1 Answer

94 jeep grand cherokee / no windows work after security bypass done

No one would have any way of knowing what you did or why

And without a wiring diagram, you have no way to familiarize
yourself with the problem

Jun 25, 2012 | 1994 Jeep Grand Cherokee

1 Answer

Check engine Light won't come on crank but no start

A common problem with this type of condition is the crank shaft position sensor. A defective sensor will not allow the engine to run.

Jun 04, 2010 | 1995 Jeep Grand Cherokee

1 Answer

I am trying to locate the fuse box on my jeep grand cheroke 1996

1998 Jeep Grand Cherokee Service Manual

see ezg_8w.pdf, PDF page 46 of 448 for the junction box

look for diagrams for fuse block, and relay center and power distribution center

fuse location is on front passenger side's side of dash (open door) OR underneath the dash, kick panel
the power distribution center is under hood.

Feb 27, 2010 | 1998 Jeep Grand Cherokee

1 Answer

I need to reset my maintenance record light on my 94 grand cheroke

Press the STEP button until you read the 'zero miles to service' message and the press AND hold the RESET button until it goes to 3000 miles to service.

Jan 28, 2010 | 1994 Jeep Grand Cherokee

1 Answer

I have a 94 jeep cherokee,will not start.leave key on the on position and after about 4 minutes i can hear the relay cliking and will start and run fine. i have already changed the fuel pump and relay?

Make sure all your grounds are clean and secure. I'm sending a wiring diagram to you...different year but more accurate than anything you will see in haynes etc.
take a look at it and perhaps you can get it figured out!
good luck

Dec 11, 2009 | 1994 Jeep Grand Cherokee

1 Answer

I need a wirng diagram for the tail lights in my 200 grand cherok

You dont want to cut your wiring for the tale lights on your jeep,
stop at a auto parts store and pick up a made for your jeep plug in adapter,

Jan 12, 2009 | 2000 Jeep Grand Cherokee

Not finding what you are looking for?
1994 Jeep Grand Cherokee Logo

1,145 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts


Level 3 Expert

77939 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides