2003 Ford Escape Logo

Related Topics:

Posted on Sep 23, 2010
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

I have a 2007 Ford Escape 2WD XLT. The car wont start. I replaced the battery yesterday and it still wouldnt start.. So I checked the power on all wires and thought it was the starter relay so I changed it and it started immediately. This morning the car wont start again... it just makes a whitstling noise.. no crank or click.

1 Answer

ZJ Limited

Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

  • Ford Master 17,989 Answers
  • Posted on Sep 23, 2010
ZJ Limited
Ford Master
Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Joined: Jul 15, 2008
Answers
17989
Questions
0
Helped
14458677
Points
60858

The solenoid or starter relay could be defective, this is located on the passenger fender. Also, the ignition switch could be faulty.

Other possibility is the Neutral Safety Switch (Automatic Transmissions) or the Clutch depressed switch are disconnected, or broken.

On vehicles with EEC-IV there can be a problem with the PCM module, remote but possible; usually this device is located under the glove box and behind the right kick panel.

Are you check the fuel system (fuel presure, fuel filter clean, etc. etc.).

Keep us updated.

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

2007 ford escape xlt no heat. Blows but not warm ever.

Feel the heater hoses that go to the heater core under the hood. With the engine warmed up, both hoses should be hot. If not, I would think you have a plugged up heater core.
1helpful
1answer

Power steering assist fault how to fix it?

Yes, it is electronic! check fuses and check for codes.

https://www.google.com/search?q=08+Ford+Escape+xlt+my+power+steering
0helpful
1answer

I have a 2006 Ford escape xlt. The tach, speedo, and odometer are not working. I also have a check engine, brake, abs, battery light that stay on constantly. How can I fix this issue.

Take it to a qualified repair shop. Having a factory or some other professional type scan tool An doing a full vehicle scan of all the computers on the vehicle is where too start .
0helpful
1answer

Reverse light not working on 2009 ford escape

First check the bulbs. To many times I have replaced bulbs. If bulbs are good then you have to go to the neutral safety switch. It on the drivers side of the transmission. You have power in, because other things work. Check power out. Usually a purple or purple/white wire. No power out. Replace the switch. Personally, I would just live with it.
0helpful
1answer

Changed the battery on 2010 ford escape and there is no power

Do you have 12 volts at the battery posts and at the starter ?
Do the headlights work ?
0helpful
4answers

Loud clicking sound when trying to start my 2010 ford escape. It dosn't start, it just clicks

check for battery,battery terminals not clean for good contact,faulty starter solenoid. Tapped the starter with something heavy and try to start.
1helpful
1answer

2001 ford escape sometimes it wont start, then

Sounds like an air leak possibly, check all your vaccum lines that go into the intake manifold.
2helpful
1answer

2007 ford escape 2wd i put the harness on for the

This feature is programmed into the smart junction box(interior fuse panel) If your vehicle was originally equipped with this feature then you may just need to have it reprogrammed or turned on by the dealer with their scan tool. If it was not originnaly egipped then the smart junction box would have to be replaced.
Not finding what you are looking for?

312 views

Ask a Question

Usually answered in minutes!

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...