Question about 1994 Ford Taurus

3 Answers

Engine stalls I have a 1994 Ford Taurus 6 cyl 3.6 I think Seems to stall after traveling around 20-25 miles wrapped the inginetion coil in a cool towel started but stalled out after 3-8 miles so I replaced the coil I the problem still exists any Suggestions

Posted by on

  • channinguy Jun 05, 2008

    car stalls at random times. also doesnt start at random times. then runs fine for a while. replaced fuel filter,ignition coil, wires....whats next

×

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

THE PROBLEM IS THE "TFI" THICK FILM IGNITION ( MODULE ) .

Posted on Nov 11, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

@ Mel710: WTF are you trying to say??

It could be your alternator, as i also have a 94 taurus and have replaced the Alt twice already. the alternator will always give you an initial charge, but if it has failed, it will not charge your battery for you and you will stall in minutes

Posted on Jul 30, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I Have A 1994 Tourus Tran Pro it Slo When i stop When i take off it slo to Enage Den it catch Fast

Posted on May 22, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2.0 l 4 cyl. MT. Why does engine stall after it warms up?


IAC - idle air control valve ? Maybe a vacuum leak .

Nov 25, 2015 | 1995 Ford Contour

1 Answer

2000 ford taurus engine light came on. car idles real low when we come to a stop . to keep from the engine stalling out we put it in neutral and give it a little gas.


Check coil pack they can go bad even when not many miles. Also check plugs. Check the code see if it is a misfire. Vulcan or Duratec engine?

Feb 12, 2014 | 2000 Ford Taurus

2 Answers

1994 jeep engine stall code 11


The 4 cyl and 6 cyl engines use a distributor, so no crank and cam sensors.
There is a pick-up coil in the bottom of the distributor that could be failing.
Code 12 means the battery has been disconnected or the ECM has lost power since the last scan.

Jun 27, 2012 | 1994 Jeep Cherokee

1 Answer

Car stalls after running for a while


Check your coil and crankshaft position sensor What are your engine codes

Dec 06, 2011 | 2001 Ford Taurus

1 Answer

I have a rough idle at low rpm almost feels like it wants to stall once it reaches normal operating temp it improves some what I think its the EGR or spark knock 2000 Ford Taurus 3.0L V6


It could also be a vacumme leak. A quick way to check for that is to starting fluid around hoses and gasket areas. If the engine picks up speed when you spray around the engine and not directly in the throttle body, you have found your leak. I also believe these cars have an idol air control valve or IAC that might need to be cleaned or replaced. Check your spark/coil wires while you are checking around.

Mar 05, 2011 | 2000 Ford Taurus

1 Answer

Overheating engine in 24 valve 96 ford taurus 6 cyl


the thermostat can be easily changed from up top, the T-stat is located at the engine end of the upper radiator hose under the flange the hose connects to. Make sure u follow manufacturer's cooling system bleeding procedures when you refill after the T-stat is changed out.

Jun 14, 2009 | 1996 Ford Taurus

1 Answer

Won't turn over


make sure the fuel injectors are not clogged and getting right voltage. if that is not it looks at your engine sensors

Jun 12, 2009 | 1994 Ford Taurus

3 Answers

2002 Ford Taurus ses 24v DOHC


1st thing change fuel filter. You probably pulled in some crud from the bottom of the tank. countrycurt0

Sep 09, 2008 | 2002 Ford Taurus

1 Answer

I need a list of the EGR/Trouble codes for a 1994 Ford SHO Taurus


Sounds like the catalytic converter has gone bad. What happens is you car as you drive will lose power, smell like rotten eggs and stall out. The reason is, the cat. is plugged up and cannot let the exhaust out of the tail pipe like it should. The exhaust is staying in the engine causing it to stall out and loose pwer.

Jun 11, 2008 | 1994 Ford Taurus

Not finding what you are looking for?
1994 Ford Taurus Logo

Related Topics:

311 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

61037 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...