Question about 2000 Hyundai Sonata

1 Answer

Slternator removal unable to remove alternator from hyubdai 2000 sonata.w / v 6 engine need removal instructions

Posted by on

  • Anonymous Jun 19, 2008

    Same deal, Could not get the alternator out of a 2000 Sonata GLS
    Had to drop the front RH Suspension and slide the alternator out that way, Bit of a pain but could not see any other way

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,665 Answers

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

Tip

How to change the Alternator in a Toyota Corolla car.


The Car uses an alternator to run electricaldevices in your vehicle while the engine is running.The alternator assemblyhelps the voltage regulator to to maintain the steady voltage.
1) Before buying new alternator ,first of all determine which alternator your car needs.Car models made from 1966 to 1970 have a 1.1 L or 1.2 L engine. Models from 1970 to 1978 have a 1.2 L, 1.4 L or 1.6 L engine. Models from 1979 to 1987 have 1.3 L, 1.6 L or 1.8 L diesel engine. Models 1988 to 1992 options include a 1.3 L, 1.5 L, 1.6 L or 2.0 L diesel engine. Models made from 1993 to 1997 also offer a 1.8 L engine. Models from 1998 to 2005 in the United States were available only with a 1.8 L engine. So before buying for new alternator check out this details.
2) The latest Toyota Corolla 2006 has 1.5 L, 1.8 L or 2.4 L engine.
3) After getting the exact alternator for your Toyota car engine. Follow this instructions to replace the alternator in car.
4) First of all disconnect the negative battery cable with a socket wrench. There is a gravel shield blocking the alternator. You will have to remove the gravel shield to access the alternator.The alternator is located under the car.
5) Then you will have to remove the battery terminal wire.to remove the battery terminal wire you will have to remove the electrical connector and loosen the nut on the alternator terminal with a socket wrench. And this will allow you to remove the battery terminal wire.
6) Now you can remove the alternator.to remove the alternator.you will have to remove the drive belt. For that you will have to loosen the two mounting bolts on the alternator with the help of socket wrench and this will help to take the alternator off the vehicle.
7) Now to install the new alternator assembly. You will require the torque wrench to tighten bolt .There are two bolts one is smaller and other is larger.Connect the smaller mounting to 18 foot-lb and the larger mounting to 40 foot-lb.
8) Then carefully connect the electrical harness and battery terminal wire to the alternator and tighten the retaining nut to the alternator terminal with a socket wrench. Install the gravel shield which you removed while removing the old alternator. Reconnect the negative battery cable with a socket wrench.
The above instructions will help you to replace your cars alternator.
Thanks.Goodluck.

on Feb 19, 2010 | 2000 Toyota Corolla

1 Answer

Where is routing belt located on Hyundai Sonata 2001 Alternator?


I believe you are referring too the Accessory Drive Belt for the Alternator...See attached drawing



25629874-2mhejhdcommskt1vzkafo1v3-3-0.gif To Remove:
  1. Raise and support the vehicle.
  2. Remove the engine splash shield.
  3. Rotate the drive belt tensioner clockwise to release the drive belt tension.
  4. Remove the drive belt from the alternator.
  5. Slowly release the drive belt tensioner.
  6. Remove the drive belt from the accessory drive pulleys.
To install:
  1. Install the drive belt to the accessory drive pulley.
  2. Rotate the drive belt tensioner clockwise.
  3. Install the drive belt to the alternator.
  4. Ensure the drive belt is properly aligned and seated into the grooves of the accessory drive pulleys.
  5. Slowly release the drive belt tensioner
  6. Install the engine splash shield.
  7. Lower the vehicle....saailer

Apr 05, 2015 | 2001 Hyundai Sonata

1 Answer

Replace alternator on 2002 Hyundai Sonata LX with ABS


I pull the drive axle loose to remove the alternator, it gives you just enough room to wiggle the alternator out, OR you can remove the upper mount and jack the engine up and drop it down by the oil pan.

Jul 24, 2012 | Cars & Trucks

1 Answer

WHERE IS THE SERPENTINE BELT LOCATED ON A 2003 HYUNDAI SONATA


Vehicles Covered: Hyundai Sonata 2002-2004 (2.4L & 2.7L Engines)

In 2003, Hyundai produced two types of Sonata:
Available engines:
4 Cylinders 2.4L VIN "S", MFI DOHC - see Figures 1 and 3.
6 Cylinders 2.7L VIN "H", MFI DOHC - see Figures 2 and 3.

To differentiate between these types of 2003 Hyundai Sonatas, the VIN 8th digit (Engine Type) will either be "S" or "H" as in the table above.

To locate the Engine drive belt, jack up the vehicle & place it onto jack stands, then slide under the car (toss a cardboard mat down first), then, once under the car, remove the (plastic) engine splash shield. Once removed, the drive & accessory belts are easily observed.

12_27_2011_5_25_29_am.jpg

Fig. 1 Accessory Drive Belt Routing 2.4L (4 cyl) Engine - Hyundai Sonata
The "COMPRESSOR" refers to the A/C compressor, and "GENERATOR" refers to the Alternator.


12_27_2011_5_27_01_am.jpg

Fig. 2 Accessory Drive Belt Routing 2.7L (6 cyl) Engine - Hyundai Sonata
The Belt Routing on the Left is "With A/C", on the Right is "without A/C"

Inspection - Drivebelt and Accessory Belts

Inspect the drive belt for signs of glazing or cracking. A glazed belt will be perfectly smooth from slippage, while a good belt will have a slight texture of fabric visible. Cracks will usually start at the inner edge of the belt and run outward. Worn or damaged drive belts should be replaced.

Drivebelt Removal & Installation - 2003 Sonata (2.4L and 2.7L engines)

Raise and support the vehicle.
Remove the engine splash shield.
Rotate the drive belt tensioner clockwise to release the drive belt tension.
Remove the drive belt from the alternator.
Slowly release the drive belt tensioner.
Remove the drive belt from the accessory drive pulleys.

To install:

Install the drive belt to the accessory drive pulley.
Rotate the drive belt tensioner clockwise.
Install the drive belt to the alternator.
Ensure the drive belt is properly aligned and seated into the grooves of the accessory drive pulleys.
Slowly release the drive belt tensioner
Install the engine splash shield.
Lower the vehicle.

Here's the best illustration I can find of the Hyundai 2.4L and 2.7L engines - the drivebelt seems to be located on the passenger side of both of these transversely mounted engines.

12_27_2011_6_03_16_am.gif

Fig. 3 Hyundai 2.4L and 2.7L engines - Underhood sensor locations 2002-2004 only

Glossary of Acronyms
---------------------------------
A/C - Air Conditioning
DOHC - Dual Overhead Cam
MFI - Multi-port Fuel Injection

Dec 25, 2011 | Hyundai Motor 2003 Sonata

1 Answer

How do I access the alternator on a 2000 Audi A-6 quattro 2.7 Bi turbo? Do I need to take the front end off ? If so how is it done ? Also is there a fuse link or the like that could stop the alternator...


YOU DONT HAVE TO REMOVE FRONT END.JUST TO REMOVE ALTERNATOR YOU HAVE TO REMOVE AIR INTAKE CHANNEL REMOVE ENGINE UNDER COVER.YOU HAVE TO REMOVE HOSE TO CHARGE AIR COOLER.REMOVE ALTERNATOR WIRING HARNESS.REMOVE A/T AND A/C LINES.DONT DISCONNECT.REMOVE ALTERNATOR BOLTS THEN REMOVE ALTERNATOR.

Nov 23, 2010 | 2000 Audi A6

1 Answer

Where do i start how to install timing belt on a 2000 2.4 hyundai sonata


First remove all. Power-steering pump 3 bolts on cylinder head. Loosen the alternator. remove the two belts. Underneath the car. remove black wheel arch plastic cover (6 or 7screws) Loosen the air con pump tension-er pully. Remove belt. put a trolley jack under engine as the mounting needs to be removed and lift the engine slightly. Remove the engine mounting bolts next to the black cam belt cover and remove the mounting. Loosen the Main crank shaft pulley. Normally very tight put a power bar and socket on. engine turns forward so let the bar rest on X member and turn the key only so that the engine turns. do not start. Remove cam belt covers (comes in to parts - top and bottom) then loosen the tension pulley which is on the left. 1 x bolt in middle. remove cam belt. now the tricky part. Replace the bottom crack pulley. turn so that the marks are lining up. the cam pulley has got a small hole in turn the hole upward to the top of engine. there is a small dot on the cylinder head which can be seen through the hoe. line up. replace idle pulley on the right. replace tension pulley on the left. put new belt on and now to tension the belt. take a number 5 or 6 allen key and turn the tension er clock wise until its like a watch at 10 min to the hour. tighten the bolt. test belt with fingers. if belt to loose you will feel the belt move easily. belt must not be to hard when pressed. try to turn the belt with fingers half a turn if going passed the halfway mark tighten some more. Use power bar and ensure engine turns properly meaning two or three full turns with hands without it getting stuck. otherwise the valve and piston is toughing. if so do crank turn of 180 degrease. free turn again. should be right. replace all that was taken off. start car. if belt tension is to tight you will hear a signing sound.

Aug 04, 2010 | 2001 Hyundai Sonata

1 Answer

I have a 2004 sonata,6 cyclinder, my mechanic broke the engine sensor when trying to bring it out to clean oil slunge(according to him)please how do i get a replacement, the ones we tried so far did not...


Dont go to that mechanic again ---->>>remove the intake manifold ,remove radiator ,remove radiator intake and outake housing, remove fan ,remove all belts: power steering, alternator and if you have a/c, remove harmonic balancer ,remove timing belt covers, remove timing belt remove intake housinng once you have remove all the above, your freaken engine will look naked, you can see the location of the sensor is located in the engine valley usally on the left side --->>> hope i helped

Nov 21, 2009 | Hyundai Motor 2004 Sonata

1 Answer

Need to know how best to remove the alternator of a 2000 sonata


Go to http://www.hmaservice.com/ and register (vehicle by VIN). Afterward, you'll have access to technical information (manuals, wiring diagrams, service bulletins, etc) about your vehicle.

Mar 22, 2009 | 2000 Hyundai Sonata

1 Answer

I can not figure out how to remove the alternator from a 2000 caravan w/3.3l engine. Alternator is free but I can not contort it out of the engine compartment? Any help please! Thanks Greg


I have recently done this twice to my 2000 Grand Caravan with the 3.3l engine.
1) Remove the top plate which is attached to the alternator mounting bracket held in by 3 bolts.
2) remove the alternator bolts securing the altenator to the mounting bracket.
3) pry the alternator off the bottom mounting bracket
4) turn the alternator around show you can easily see the power wires on back of the alternator and remove the 11/32 nut holding the wire to the alternator. Be careful not to drop the nut behind the engine, because you probably will never find it (experienced).
5) Disconnect the wires from the alternator
6) Remove the black cooragated tube running vertical in front of the alternator and remove the tubes hold clip from the suspension wall.
7) Slide the alrernator pully first up through the opening. You may need to rotate the alternator a little so it fits up through.


Chris

Mar 21, 2009 | 2000 Dodge Grand Caravan

Not finding what you are looking for?
2000 Hyundai Sonata Logo

Related Topics:

190 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

63661 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21986 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...