I have a 1993 toyota crolla and it wont back up when i put it in revrise it just goes front whats wrong and how do i fix

Blown fuses. Broken wires. Bad thermal switch. Burned out motors

Try replacing the fuel filter, it's located underneath on the frame where the front passenger sits, look inside of the frame rail.

to remove back seat put front seat forward look for a latch then pull it and lift if no latch push seat mase backwards and lift at same time it will come out

as for what filts call local salvage yard they know what fits and what doesnt

Yes.......I fixed it for now....EFI relay. after putting in a new fuel pump$ 200.00 later and another relay $ 40.00 for next day delivery.I inserted my friends relay into my car....burmmmmmmmm..$ 30.00 and fine...
what a Pain.In.The.A..................................................................................

selector cables need re adjusting ,possible an outer sheaf is broke

I believe the reason the lights would still work is due to the fact a light bulb doesn't discriminate about polarity. It would be fair to say you have fried relays in your car. These should be located in something that looks like a fuse box in your engine bay. Some may also be in your fusebox. Hope this helps and good luck.

It simply means there might be an issue you need to resolve but not necessarily a problem.

Take it for a scan is the best advice but you could also remove your battery terminal for 5 minutes and replace back.

Rate this please.

CHECK FOR CUT OUT SWITCH WHCH SHUTS DOWN POWER IN ACCIDENT, BUT WELDING WITH THE BATTERY CONNECTED MEANS YOU PROBLERLY FRIED SOMETHING, WHICH MEANS CHANGING BITS TO FIND WOTS WRONG, TAKE STARTER OUT AND TEST ON BATTERY FIRST,

This is Caused By the Grease in the Spindle Bearings Getting frozen. Get it Greased up really Well and you Might need to Repack the Bearings on this side to Stop this and Stop further Damage to the Spindle.