Question about 2007 Chevrolet Silverado 1500 2WD

1 Answer

2007 chevy truck 6.0 4x4

When running the engine looks like it is moving lift to right may be engine mount or is this normial,its a 6.0 chevy 2007

Posted by on

  • bigrat May 20, 2008

    the truck has 3700 miles it seems like it has a miss fire but there are no codes or check engine lights


1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert whose answer gotĀ voted for 20 times.


    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 183 Answers

Dear Customer,

ITs not happens if your car not have mush time of buy ,

but if your car is a new than its not to happens cause its heavely mounted but if you ahd drive a long route than may have some problem related to mounting ,THAN TIGHTEN THIS MOUNTINGS AGAIN AT SHOWROOM OR CERTIFIED MECHANICS,


DO this with care,


Posted on May 20, 2008

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I have a 2007 chevy cavalier and my fan won't come on

Find a place that clean remove as much as part in order as you can. oil pan drop it transmission pan drop it battery remove and keep thing clean as possible. starter intake everything fan power pump and radiator than you can remove hood and get a lift for engines and unbolt the trans than the motor mounts

Aug 10, 2014 | 2007 Chevrolet Cavalier

1 Answer

Chevy SS. can't get the right motor mount to fall back in place

loosen drivers side and attempt to equally lift and lower into place sagging engine mounts make it difficult .

May 01, 2014 | 2003 Chevrolet SSR

1 Answer

2007 chevy equinox, 3.4, wanting to change the serpentine belt. Engine mount in the way. If I take these bolts out will the engine fall out of alignment?

No it wont. Use a jack to keep the engine lifted. remove the mount, change the belt. you may have to wiggle or pry the engine back to get the bolts in, but it will not hurt a thing. Just pry on something that wont break.

Aug 07, 2011 | 2005 Chevrolet Equinox

1 Answer

I have a1996 chevy c3500hd truck w/454 engine all bolts are off oil pan, can not remove oil pan, clearance problem. Help Don

You could try this. It works on the previous generation Chevy trucks but I'm sure the oil pan still has the same shape. First, undo the distributor cap and lift it up from the disributor. You don't have to unplug wires but it needs to be able to move some. Then remove the 2 long bolts from the engine mounts. With them out GENTLY jack on the bottom pulley or harmonic balancer. The motor should lift just enough to slide the oilpan out. If you don't want to use the harmonic balancer, you could put a block of wood on the oilpan and jack from there. You'll have to block the engine up once it's lifted as high as you can. Use some blocks at the engine mounts to hold it. You could also lift the front of the engine with a set of chainfalls or engine hoist. The engine will have to go up until the distributor fetchs up on the firewall, that's why the cap has to come off. Hope this helps.

Jun 04, 2011 | 1996 Chevrolet C3500

1 Answer

I think my motor mounts my be broken how can i tell 1999 chevy cavalier

have someone power brake the car, wile you watch for the engine to rise up on its mounts make sure to power brake it in forward and reverse if the mounts are broken there will be a very noticeable lift in the engine. also check the top thrust mounts they look like a dog bone and mount right behind the radiator make sure the rubber bushings are in good shape and their is no movement back and fourth with the engine......HAVE FUN

Nov 15, 2010 | 1999 Chevrolet Cavalier

1 Answer

How do I replace the motor mounts on my 96 thunderbird 3.8L?

Put the car on ramps and set e brake.

Use engine hoist to lift engine weight off of car.

Remove mount to engine bolts, remove mount nut.

Lift engine just enough to remove mounts and install new.

Watch exhaust, fuel lines and transmission mount while lifting. They may have to be loosened or moved.

May 21, 2010 | 1996 Ford Thunderbird LX

2 Answers

If you have a motor mount going bad, are you suppose to be able to hear a noise of some kind?

Not usually. when a mount is bad, you can FELL the car **** when accell of a stop or changing from Drive to reverse. To check it, put on your parking brake, now hold the brake pedal with your left foot, now put the car in reverse, and press the gas slightly, the engine will move slightly, now put it in drive, the engine should shift slightly, if it moves a LOT like a few inches or moves upward, you may have a mount bad and it needs to be inspected.

May 12, 2010 | Hyundai Motor 2004 Sonata

1 Answer

2007 chevy silverado 2500 hd duramax shut down

mo me it sounds like low fuel volume i would check my lift pump

Sep 30, 2009 | 2007 Chevrolet Silverado 2500HD

1 Answer

Engine mount replacement

There are two liquid filled and a trans mount. You need to found out which way the motor jumps if it jumps back to the fire wall I would change the two liquid fill. They are located looking at the engine on the pulley side left and right bolted to A-frame you can change one at a time. Unbolt one and jack motor with a floor jack and board just lift enough to drop it in and out. It's tough I know I did it before but it can be done. And do the same for the other. Trans mounted one never needs replaced. Just make sure the mounts are bad cause front wheel drive motors usally move but if its moving more than 2"-4" then replace them.

Apr 24, 2009 | 1994 Ford Taurus

1 Answer

2007 Chevy silverado 1500 4.8 wont start

If you had to loosen the engine mounts and raise or lift the engine to gain clearance you may have accidentally pulled apart an electrical connector or cracked the distributor cap when it hit the firewall. good luck

Feb 12, 2009 | 2007 Chevrolet Silverado 1500 2WD

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

59 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts


Level 3 Expert

70374 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6878 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides