Question about 2002 Ford Ranger Regular Cab

1 Answer

2002 ford ranger 4.0 SOHC vacuum diagram

I am finishing up a rebuild that I started about a year ago and Im having trouble figuring out where one last vacuume hose plugs in. Anyone know where I may find a diagram?

Posted by on

  • Pumfe May 20, 2008

    Thanks for the link, but, am I missing something? I didnt see a vacuum diagram listed anywhere.

  • bryceintexas Mar 29, 2009

    i also need a vacuum diagram i recently replaced a head gasket on a 4.0 sohc 2002 ford explorer. We got everything put back together and got most of the connections figured out but it isnt running at full potential due to hoses and lines not connected. I need a diagram asap


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert who has answered 1,000 questions.

  • Master
  • 2,035 Answers

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

2002 xterra 3.3 running very lean not much power

Drain the fuel out and flush the fuel system, then it should run better.

Jun 29, 2016 | 2002 Nissan Xterra

1 Answer

I have 93 pathfinder. it started to run a lil ruff so i changed sparkplugs .. now its barely ideling n dieing when i come to a stop.. i noticed a vacuum hose is off n i cant see where it goes . its about 8...

If its a vac hose it will have vac in it when the engine is running, or you will have a pipe on the intake pulling air where the hose is supposed to connect.
You may be able to look at a similar vehicle to figure out where the hose goes.

Feb 11, 2014 | 1993 Nissan Pathfinder

1 Answer

Car turned off, & now wont start

You can't have ANY Exhaust leaks BEFORE the
Converter or you won't get rid of the PO174 or have control
of injector pulse or fuel trim
You have a timing chain -no belt
Better use 5W-20 Full Syn Oil if want the
VVT Cam Actuators to last
All those codes are ignition cylinder misfires
All you have done so far is preventative maintenance,
what some call a tune-up which by the way ended some
25 years ago or more.
You have done nothing to diagnose the codes apparently
& find the cause of the fault codes
You have misfire on both banks no matter a V6 or V8
Easy to figure out,need a repair shop or study those
codes on the internet.
Check for vacuum hose leaks EGR etc
Forget the PO300 & 316 they are of no use to you
Do not use it until resolved as you don't know if you
have a Class A or B misfire that could damage the
O2 Sensors ( front ones) get replaced at 100,000 miles
You need a good battery- the motorcraft are okey & made
by johnson controls, but only last about 4 or 5 years.

Jul 12, 2013 | 2005 Ford Explorer

1 Answer

My 89 Acura legend starts cold and has never died after running but after I turn it off it won't start again for 15 minutes or so. It's done this since I bought it 2 years ago. Anyone know how I...

You'll have to figure out if it is a fuel or ignition problem.
Is the check engine light on ? Have you checked for trouble codes ?
It could be a relay, the ignition module, coil, fuel pump, or a list of other things.

Jul 08, 2012 | Cars & Trucks

1 Answer

Where can I find a vacuum hose diagram for a 1997 ford thunderbird 4.6 ? I started working on my car 3 1/2 years ago and now getting it back together but I am having troubles trying to remember where and...

usually, the vacuum hose routing is on the underside of the hood, but if yours is missing, check on . the component locator should be there. if not, try a haynes repair manual .

Jul 18, 2009 | 1997 Ford Thunderbird LX

1 Answer

PCV valve? IAC valve? Sparkplug wire? Throttle body? Vacuum hose?

the most common causes are plug wire, plug, vacuum leak at intake, fuel injector failure and last no/low cylinder compressio.

May 22, 2009 | 1998 Isuzu Rodeo

1 Answer

Oil blowing out of the dipstick tube.

On top of the valve cover there is a fresh air breather unit. Make sure the breather unit is not plugged.
Also the fixed orifice PCV should be clear. Find a tool that will go through the orifice and make sure it is clean.
Remove the vacuum hose and check it for cracks or internal damage. With the engine running, make sure you have vacuum through the hose.
Let me know when your finished cleaning the crankcase breather system.

Apr 09, 2009 | 1994 Jeep Wrangler

1 Answer

Brake and battery light are on in my 85 toyota pick up

sounds like a alternator take the truck to a local rebuilder and have him test it

Apr 09, 2009 | 1991 Toyota Pickup

Not finding what you are looking for?
2002 Ford Ranger Regular Cab Logo

Related Topics:

716 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts


Level 3 Expert

68970 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22026 Answers

Ron Lankford

Level 3 Expert

5383 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides