2001 Nissan Sentra Logo

Related Topics:

Anonymous Posted on Sep 21, 2010

2001 nissan exalta sta/sentra (released in the phils) reverse or back lights dont work..This car has 4 reverse lights. Left, right and two in the middle (near the plate number).When i put the car in reverse, only the middle reverse lights work. The left and right reverse lights dont work at all. I have checked the bulbs and they are functioning well...

  • Anonymous Sep 22, 2010

    hi michael. im attaching pictures to give you a clearer picture of the problem that i have. by the way, i believe the nissan exalta (released in the philippines) is just a higher version of the nissan sentra. Which is why im including the back-light wiring diagram of the nissan sentra 2001 (Canada/U.S version) that i got from the internet. I think its just the same.



    fuse is ok by the way..

  • Anonymous Sep 22, 2010

    nissan sta (released in the phils) is just a higher version of the nissan sentra. fuses for tail lights and stop lights are ok. the only thing that is not working are the left/right reverse lights. The middle reverse lights are ok.

×

2 Answers

Anonymous

Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

  • Master 2,299 Answers
  • Posted on Sep 22, 2010
Anonymous
Master
Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Joined: Sep 18, 2009
Answers
2299
Questions
7
Helped
689497
Points
6523

There has to be a broken wire in the harness. If it was anything else it would blow the fuse to the other two lights. So it has to be a broken wire. You should be able to get to the wires in the trunk. You will have to pull off the cover directly behind the lights. The wire could be broken inside of the insulation. So it may be very difficult to find.

A

Anonymous

Locate the fuse box underneath the drivers side steering wheel and remove the cover lid. Underneath the lid is a diagram of what each fuse controls. Locate the "Stop Lamp" and "Taillight" fuses and pull them out and check them with a fuse test light (avalible at your local auto parts store) Replace the burned out fuse with the same number fuse (the amp number is located on top of the fuse) and your lights will work again

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
3answers

My nissan exalta sta 2000 model, motor idles but dies as soon as you give it gas.. already change spark plugs, tune up, replace engine gasket and fuel filter..

Has the car been running on empty recently? Running with low fuel can damage your fuel pump because on some cars the gasoline is the lube for the pump. a bad fuel pump could be the problem. Look up some YouTube videos on how to diagnose
0helpful
1answer

2001 nissan sentra (released in the phils) reverse or back lights dont work..This car has 4 reverse lights. Left, right and two in the middle (near the plate number).When i put the car in reverse, only the...

sounds like you have a bad ground wire or the wire going to the sides is broken. you may have to check the connections till you find where the wires are connected. if you can test the two side lights with a battery to confirm they do work and are not bad bulbs. or switch them with working light bulbs to confirm they work. then if they work they you need to start looking for a section of wire that may be broken or is corroded and will need to reconnected to make work again.
1helpful
1answer

Nissan 2001 exalta ecu location

Also called Sentra... Engine computer is located under the dash by the firewall. This is where the ecu is located on '01...

8_7_2012_8_38_14_pm.jpg

Hope this helps; also keep in mind that your feedback is important and I`ll appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using FixYa, have a nice day.
1helpful
1answer

I have Nissan Exalta2000, it would power off all of a sudden while driving, the 4 icons on the dashborad lit up and if I stop tha car wont start. it happens 3 times and if I get a mechanic they cannot...

hello there, had to do some looking up as to what NISSAN EXALTA 2000 actualy is. i reside in USA and we do not have exalta on our streets. here, its a powertrain aka engine and transmission in a NISSAN SENTRA so it should be very similar to our sentra as far as setups except for different body. I think that you have an issue with the CRANK ANGLE SENSOR. i would start with replacing the sensor. is the SERVICE ENGINE SOON light on??? if so, that could be for many reasons and one of them would be crank angle sensor issue. nissan had problem with those sensors. they would cause the car to die. nissan had campaign / free replacement program in those model years of nissan sentra 2000 year model. have the crank sensor replaced. start there. like i said very common problem.
0helpful
1answer

Steering problem

check the level of the power steering fluid.
1helpful
2answers

2001 sentra no communication with scan tool

Take a few minutes to make sure you dont have a blown fuse....Run through them with your test light...
0helpful
1answer

The plugin to my headlight on my 1994 nissan sentra is bad. I found the same plug off of a 1991 nissan that will work but has a different color wires. how do match the wires between the two?

Dont worry about the colors.
Just be sure of the position of the connections.The wires pulled off the light go right back on the light in the same position they came off.
0helpful
1answer

Transmission problem

you might want to check the brake pads. it might be thin enough to make the wear indicator touch the rotor disc.
0helpful
1answer

Reverse Lights

HI
IT WAS NOT A DEFAULT PROBLEM
MAY BE THERE IS A LOSS OF CONNECTION OR IT WAS BURN LIGHT ??
1helpful
1answer

Back up lights not working

there shoul be a two wire sensor on the side of transmission make sure sensor is by passing power with ignition on and reverse aplyed if not replace back up sensor or switch
Not finding what you are looking for?

1,227 views

Ask a Question

Usually answered in minutes!

Top Nissan Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...