Question about 2002 Hyundai Accent

2 Answers

Hyunday coupe 1.6 valve

I have problem with engine.It is clicking when I start . I changed oil but it is not better.I think I have to change valves. I want to know how much is it and where i should do it.Other question :do I have still guarantie, because i dont have service book( car 2002 , 40000miles). My car is hyunday coupe but i coudnt find it, thats why is accent

Posted by on

  • abdsh Jan 18, 2009

    i have the same when the weather is too cold but my 2005

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

You will find its the pistons expanding in the bores of the cylinder block as this ticking is more like ball bearings in a tin rattling and when its up to temperature you will find the noise stops i sent off for some bigger pistons to refit the bores which solved my problems and now its fine hope this helps

Posted on Jan 19, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,665 Answers

Register for an account FREE at link below to get information about your car.
http://www.hmaservice.com/
Get user name, password and login. On page click ETM and select model ie accent MC ,year 2002, G 1.6DOHC.

Posted on May 19, 2008

  • Kleanthis Mavropoulos
    Kleanthis Mavropoulos May 19, 2008

    Temporary noise on starting a cold engine.
    Is normal
    This noise will disappear after the oil in the engine has reached normal pressure
    When you get page login click SHOP tab and then select model ACCENT (LC) 2002 >G 1,6DOHC and see troubleshooting

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

1995 Olds Silhouette rattled badly, died while running


I think you had better have a local shop inspect this for a failed engine connecting rod.

Aug 23, 2012 | Oldsmobile Silhouette Cars & Trucks

1 Answer

P0011 code. My car started jurking in the middle of traffic about a month ago. The first week, I replaced the cam sensor and it drove smooth for 2 weeks but the jurking came back. I got the cam sensor from...


PLEASE READ ALL THIS INFO.

MAKE SURE THE ENGINE OIL IS CLEAN AND CHANGED AT PROPER INTERVALS
P0011 NISSAN - Intake Valve Timing Control Performance Bank 1

Symptoms - Engine Light ON (or Service Engine Soon Warning Light)
- Possible engine lack/loss of power
- Posssible engine rough idle
Possible causes - Harness or connectors
- Intake valve timing control solenoid valve circuit is open or shorted
- Intake valve timing control solenoid valve may be faulty
- Crankshaft position sensor (POS) may be faulty
- Camshaft position sensor
Tech notes Since the Intake valve timing control solenoid valve uses oil flow to control timing, dirty oil can cause the valve to stuck open or close. Before replacing the valve, change engine oil and filter and reset engine code. When is the code detected? When there is a gap between angle of target and phase-control angle degree, the valve will stop working and the ECM will trigger the P0011 code. P0011 NISSAN Description This mechanism hydraulically controls cam phases continuously with the fixed operating angle of the intake valve.

The ECM receives signals such as crankshaft position, camshaft position, engine speed, and engine coolant temperature. Then, the ECM sends ON/OFF pulse duty signals to the intake valve timing control solenoid valve depending on driving status. This makes it possible to control the shut/open timing of the intake valve to increase engine torque in low/mid speed range and output in high-speed range.

The intake valve timing control solenoid valve changes the oil amount and direction of flow through intake valve timing control unit or stops oil flow. The longer pulse width advances valve angle. The shorter pulse width retards valve angle. When ON and OFF pulse widths become equal, the solenoid valve stops oil pressure flow to fix the intake valve angle at the control position.
MAKE SURE YOUR OIL IS CLEAN AND CHANGED AT PROPER INTERVALS.

Sep 07, 2011 | 2006 Nissan Altima

1 Answer

I have a 2003 a4/b6 1.8 turbo and the engine light is on. The DTC codes says random misfire, misfire on cylinder #2 and #3 also, Oxygen (Lambda) Sensor Regulation: Bank 1: System too Lean : P1111. Any...


If you can supply me with all the codes your vehicle is showing, I can assist you. As far as the P1111 DTC goes I have listed the info below with some possible solutions.

P1111- Intake Valve Timing Control Solenoid Valve Circuit Bank 1

Intake valve timing control solenoid valve is activated by ON/OFF pulse duty (ratio) signals from the ECM. The intake valve timing control solenoid valve changes the oil amount and direction of flow through intake valve timing control unit or stops oil flow. The longer pulse width advances valve angle. The shorter pulse width retards valve angle. When ON and OFF pulse widths become equal, the solenoid valve stops oil pressure flow to fix the intake valve angle at the control position. The code is triggered when an improper voltage is sent to the ECM through intake valve timing control solenoid valve. Since the Intake valve timing control solenoid valve uses oil flow to control timing, dirty oil can cause the valve to stuck open or close. Before replacing the valve, change engine oil and filter and reset engine code.

Possible Causes:
- Intake valve timing control solenoid valve bank 1 circuit is open or shorted.
- Intake valve timing control solenoid valve bank 1 circuit connectors
- Intake valve timing control solenoid valve bank 1
- Dirty Oil

Possible Solutions:
- Change Oil
- Replace Intake valve timing control solenoid valve

Jan 20, 2011 | 2003 Audi A4 Cabriolet

1 Answer

Where is the engine coolant drain valve located? and what is the best procedure to change the coolant and flush the radiator? thanks


1.) the drain valve is a bolt type device under the radiator..

2.) different flush has different methods usually buy the flush and follow the instructions.. usually
empty radiator by loosening valve underneath
tighten back valve when drained
pour in flush and top up with water
start car and allow to run for 15 minutes (with cap off)
cut off
let cool and then drain..

add coolant .. your done..

Oct 29, 2010 | 1996 Oldsmobile Cutlass Supreme Coupe

1 Answer

Changing engine oil on my 05 Altima and notice when oil filter came out maybe 1/3 of a Qt came out, im real concerned. i didnt notice any oil leak or anything. The last time i changed oil was 7 mo ago, I...


This is normal and is good. There is a one way valve built in the oil filter so when the engine is shut off this valve will shut and keep the oil in the passages so when the engine is started oil will be pumped in the engine quicker and oil preassure will be built up quicker.

Oct 28, 2010 | 2005 Nissan Altima

1 Answer

Oil in coolant system and all over under carriage and engine.


it seems there are some o-rings or seals which leak oil into the cooling system via the oil cooler. its a common problem. you can do a compression test, al cylinders should be 130lbs or better. then re try the test but add 1/2 ounce of oil to the sparkplug hole before testing each cylinder. if theres alot of increase in compression, your rings are geting bad. if theres little or no change, its likely valve seals. if theres little change on one or 2 cylinders, its a gasket or cracked head or maybe a burnt valve. if the change is between 20 and 40 lbs thats about normal for a 40K engine

May 28, 2010 | 2003 Saturn VUE

1 Answer

Hard start and I think it may be the timing belt


if it was the timing belt it would have crunched the valves by now ,i do feel you have a sensor problem?? but which one i honestly couldnt tell you.valves tapping is caused by not changing the oil regular and they clag up and do not self adjust,so change oil every 6000miles ,try taking it to the main agent because a dealer fitter will understand their own particular make of vehicle better than myself when it comes to sensors and peculiarities of the model

Jan 25, 2010 | 1999 Hyundai Sonata

1 Answer

Engine misses, new plugs in it today, still misses


sounds like you could have a leaky valve..

i unpluge 1 plug wire at a time and see if 1 doesnt seem to change the sound of the engin to much. then you will know what plug is doing it and check those valves "exhaust/intake"..

or even check to see if that plug may have oil on it for that could be valve seals or oil ring on piston that would cause a miss..

Jul 08, 2009 | 1993 Chevrolet C1500

1 Answer

My Hyunday Elantra' 94 won't start when hot


uncap and press valve on fuel rsail to purge and confirm fuel. Then ck the first sensor in duct coming out of air cleaner. unplug and plug it back in ensuring good connection. good luck

May 30, 2009 | 2001 Hyundai Elantra

4 Answers

97 explorer engine taps


what this sounds like is that your engine is starving for oil and the tapping noise is yuour rocker arms. this could be due to sludge build up on the intake screen of your oil pump or the pump itself is weak and no longer is providing the needed oil pressure. another place for sludge to build up is the valve covers and until the engine heats up very little oil is circulating to the push rod,rocker arms, and lifters. my suggestion is to clean the valve covers, drop the oil pan and remove the pump to look at the gears to see if there are missing teeth. also clean the screen of the pick up tube. replace the oil filter and put in new oil also use lucas additive this will do a good job of keeping the sludge build up to almost nill. if the problem persists then i would say that one or more of your hydraulic liftyers is weak and then they will need replacing.

May 13, 2009 | 1997 Ford Explorer AWD

Not finding what you are looking for?
2002 Hyundai Accent Logo

183 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

60867 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...