I hav a 98 fiesta which has a big miss in it just as u go 2 take of and it wnt take the boot properly sumtimes.i tryed an airflow meter which didnt cure it.if u connect an airflow meter it will hardly run at all but if u disconect it it runs a bit better but still has a big miss in it.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
sounds as if the lock is seized probably caused by lack of use as the fiesta has a remote opener on the dash try lifting the boot and spray with wd40 into the lock and leave over night in the upright position take the bulb out the boot light aswell to save draining the battery
is it full of coolant? thers a bleeder bolt usually high sumtimes on top wher your rad hose connects, or top of the waterpump. usually a bolt looks like it does nothing. let all the air out. or is your cooling fan working properly. sumtimes clutch goes and doesnt blow as much air as it needs
It doesn't sound like a good idea. See a custom shop that could design and install it properly. You would need to know stress points and frame design. Putting something in improperly could be dangerous while giving you a false sense of security.
yes it is one big nut, however it looks like 4 individual nuts due to the fact that they are a thinly stacked layer or thin nuts held together by what you called the tab washer............only way to replace is to get a new one from ford........