- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Front one isn't bad. Remove the belt/s. Remove the harmonic balancer. pry the seal out and replace it using a hammer. be nice to it. The rear seal, pull the transmission. pull the flywheel. remove the seal and be nice to it putting it back in.
use a timing light and shine it on the timing marks on the harmonic balancer. If it is just back firing after changing plugs or wires then check that you have not crossed 2 wires in the reassembly process.
In order to remove your harmonic balancer, you will need a harmonic balancer puller. Most harmonic balancer pullers work and look the same. For your specific car it doesn't need a specific one. You can go and pick one up at your local auto parts store. You can either buy it or rent it, depending where you go. Hope this helps.
Hello. Looking at your engine from the FRONT of your truck. Starting at the very bottom at the harmonic balancer...Your serpentine belt goes from the balancer (to the right) outside the next two pulleys. The third is inside the pulley, outside the fourth and fifth, then inside the last one to the outside of the balancer. I hope this helps, good luck, and.. Thank you for trusting FixYa to help get you going!
You have to remove the oil pan - harmonic balancer - timing cover to replace timing chain... to replace cylinder head gasket and not the chain -- you need an assistant to hold the camshaft gear with chain on it. Suspending it with wire to keep the chain from moving the timing (do not let the chain relax as it will come off the crankshaft gear and change the timing)
i have a 1998 caravan my harmonic balancer fell off my qquestion is is there 2 separate keys that hold on the timing gear and the balancer pulley on, i have been to the dodge dealer and they printed me out pics but i still don't know for sure if the timing gear has it's own key or there is just 1 long key that holds both the timing gear and the balancer ......PLEASE HELP