Question about 1989 Toyota Camry

1 Answer

1989 toyota camry blower just stopped

I tested the motor itself it works fine. whats next?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Find your fuse layout or owners manual and check the fuse and replace it even if it looks ok,thencheck to see if the switch itself is bad,if so replace it by removing the screws,(4-6) and dash cover checking the connection and switch,replace which ever one is bad and turn on the car,turn one the switch if nothing happens the switch is bad replace and enjoy!

Posted on Jun 02, 2008

  • dennis adee
    dennis adee Dec 27, 2013

    coulld be the relay behind the passengers feet interior panel

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2002 grand caravan blower motor intermittent replaced resistor


in review
the fan speed resistor is new
you bench tested the blower motor
12 volts test ..only runs it at full speed
if cabin filer want changed the blower motor would run hotter

could be the motor brushes or bush/motor bearing when slowed
you might want to inspect the brushes and clean the dust out of the motor
if no better
does that have climate control ?
might be the fan switch itself or the earth isnt so good

pm9193-front-vpok4bnazo4imyyhqje4rxo2-4-0.jpg

images-vpok4bnazo4imyyhqje4rxo2-4-1.jpg

Apr 01, 2017 | 2000 Dodge Grand Caravan

1 Answer

Blower motor on 2000 toyota camry works only on hi settig


Hi!!
The blower motor speeds are ultimately controlled by the Blower Motor Resistor, when the Resistor becomes defective, current goes right thru it and the Blower Motor only operates at max. speed. Replacing the Resistor is a simple task. Locate electrical connector to blower motor, trace back wiring no more than 8" to next plug, The device where the plug is connected to is the Blower Motor Resistor, disconnect plug and remove the two screws, remove and replace Resistor.
Good Luck!! A HELPFUL - 4 THUMBS - rating for this solution would be greatly appreciated. Thank you for using FixYa.

Mar 15, 2011 | 1998 Toyota Camry

1 Answer

THE FAN TO THE HEATER WILL NOT WORK WE REPLACED ALL THE RELAYS AND CHECKED THE FUSES BUT STILL WONT WORK.... THIS IS AN 1988 TOYOTA CAMRY 4 CYL.


There is a resistor pack that is in the heater box next to the blower motor, this is what gives the different blower speeds. They some-times burn-out cutting off the power.

Jan 09, 2011 | 1988 Toyota Camry

1 Answer

My interior fan on my 1989 300CE just stopped working today. Is it as simple as a fuse for that?


sometimes it can be a fuse but not always. there are three components that usually cause the blower to stop working. 1-fuse 2-blower motor regulator 3- blower motor. The blower motor and the blower motor regulator both sit in the same housing under the windshield beneath the cowl cover. The blower motor fuse should be a single strip fuse by itself near the left shock tower.

Oct 08, 2010 | 1989 Mercedes-Benz 300-Class

1 Answer

I have a 1989 Toyota 2wd pickup. I have replaced the resistor and now all four fans speeds work like they should. But now, sometimes fan motor just stops. If I turn the swith off then on it will start...


you need to catch it when it quits running and leave the switch where it is and check the blower motor for power in wire with a test light,then you'll know if you have power its the motor,if no power then the switch.

Dec 29, 2009 | 1989 Toyota Pickup SR5

1 Answer

Heater on 1990 Toyota Camry mysteriously quits working after about 5 minutes of operation. I have checked the blower motor and the switch and they work fine.


If you mean the blower stops, make sure you have access to the blower. Turn on heater when blower stops check to make sure it still has power which I think it will. This will tell you that the blower motor is going bad and shutting down when it is warmed up. To repair just replace the blower motor.

Sep 25, 2009 | 1990 Toyota Camry

2 Answers

1989 Toyota Camry, the starter cranks, but with a


Check the backlash of the starter it may require a shimm if it has a high pitch wind when starting....make sure the flywheel isnt damnage or missing teeth...

May 19, 2009 | 1989 Toyota Camry

Not finding what you are looking for?
1989 Toyota Camry Logo

Related Topics:

111 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

74241 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22082 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7207 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...