Question about 2000 Jaguar Den Plas Supercharged

2 Answers

1988 Jaguar Vanden replace headlight

How do you replace a headlight on a 1988 Jaguar Vanden Plas XJs 6 cylinder 4 door car?

Posted by on

  • 4 more comments 
  • Anonymous Mar 14, 2014

    How do you change the Alternator on 1999 xj8 vanden Plas Jaguar

  • Anonymous Mar 14, 2014

    Changing the Alternator

  • Anonymous Mar 14, 2014

    Jump start Car Under Hood

  • Anonymous Mar 18, 2014

    diagram of a AC blower motor for a 2006 Jaguar Vanden Plas

  • Anonymous Mar 18, 2014

    diagram of a AC blower motor for a 2006 Jaguar Vanden Plas

  • Anonymous Mar 28, 2014

    headlights are going on and off like indicators

×

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 100 Answers

What you need to do is remove the 2 screws on the top bezel from inside the engine bay, then underneath the outer corner of the plastic headlamp surround there is a philips screw, (put your head under neath car near from wheel) loosen the screw, do not remove it, now the headlamp plastic bezel/surround will come free enough so you can get a philips screwdriver in through the middle of the headlamp surround, there is a chrome retaining ring holding the headlamp in place, loosen the 3 philips screws (do not remove) The retaining ring will rotate and you can slide the ring out from the outer edge of the headlamp surround. The headlamp will then come out throught the middle of the surround, disconnect the 3 pin multiplug and reverse process for install.

Posted on Sep 19, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 375 Answers

Inside the the front wheel well. Just below the top of the front tire. You will find a a removeable plastic panel. That is held in place by a few pastic clips. Remove this cover and remove the bulb from the head light. By twisting the plastic ring about 60degrees or so to the left. Just in case you are not aware of the fact. Never touch the bulb with your bare hands. The oil from your hands will cause the bulb to fail. If you recently used the headlights. Let them cool off for at least 1/2 hour or so before you atempt to change them. You can receive serious burns from the bulbs if you dont. If you have the dual sealed beams like my Vanden Plas had, you have to unscrew the retainer screws from the front side and pull the bulb out the front. Pull the clip off the back and plug in new bulb, push bulb back in and retighten the retainer. If you have the square lights I would swap them out! I put the twin sealed beams from my Vanden Plas on my 90 Soveriegn after the Vanden Plas reached parts-car status. A little bit of work, but it looks so much classier!

Posted on May 18, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How can i close the sunroof manually


Pop off the garage door opener cover and turn the motor with a screwdriver

Aug 03, 2014 | 1990 Jaguar Vanden Plas

1 Answer

Which bank on inline 6 4.0 liter is bank 2?


Bank 2 is the one that contains the cylinders 5, 6, and 4, Good-Day!

May 15, 2014 | 1996 Jaguar Vanden Plas

1 Answer

Heavy gas smell on 2000 jaguar vanden plas


check for a bad fuel filter or a leaking rubber line after the fuel pump . To dump that much fuel so quickly ,the fuel pump is pumping to a broken /split hose or steel line.

Dec 12, 2013 | 2001 Jaguar Vanden Plas

1 Answer

I am looking for a service manual for 1995 Jaguar xj6 vanden plas. I am willing to pay for the manual. help me please.


if you can help yourself there are 97 ads for "1995 jaguar manual" on eBay as of 4-27-11.

Apr 27, 2011 | 1995 Jaguar Vanden Plas

2 Answers

I have a 91 vanden plas. what body style is this car .is it a xj6


the only vandeb plas i can find listed is indeed an xj6.

Dec 22, 2010 | 1991 Jaguar XJ6

1 Answer

System to lean bank-1


What kind of car? and is it a 4 or 6 or 8 cylinder? What year? my crystal ball is dead right now...

Jul 14, 2009 | 2003 Jaguar Vanden Plas

1 Answer

96 vanden plas


check your idle control sensor, also have you checked your timing, and your plugs. I had a car that had a small miss. I spent lots of money replacing and tracking just to find a plug that wasn't gapped correctly. Also no visible leaks does not mean no leaks. a pin whole could cause this. Check your mass air flow, and clean it while your doing this. Also check your throtle body sensor. Pull the throtle body its usually 4 bolts. Clean it out real good and put it back on.

let me know if this helps.

tepfy

Jan 31, 2009 | 1996 Jaguar Vanden Plas

1 Answer

Leaking valve covers, 2000 jaguar vanden plas supercharged


no there is'nt enough pressure underneath to make it leak try tighting up the valve cover bolts or just getting a new gasket about a $6.00 to $10.00 dollar fix depending on where you go

Dec 01, 2008 | 2000 Jaguar Vanden Plas

Not finding what you are looking for?
Cars & Trucks Logo

410 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jaguar Experts

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Raygin
Raygin

Level 2 Expert

322 Answers

yadayada
yadayada

Level 3 Expert

61168 Answers

Are you a Jaguar Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...