Question about 1992 GMC Sierra C3500

1 Answer

Stock horsepower - 1984 GMC C3500

What is the stock horsepower rating for a 1984 GMC C3500 with a 350 4BBL Carb?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 375 Answers

I own a shop, and build a lot of these engines. I have a race car & truck in which I built, so horsepower is something I know a little about. Most of these engines are rated around 190 - 200 horses, but when put on a dyno can be as much as 225, or as little as 175 or 180. Since its a truck engine it has more torque than an engine that was put in a car, and it also should be a four bolt main engine. The good thing about this engine is; One can get a lot more out of these with a little work. Matter of fact, its not that hard, or expensive to see as much as 400 horses from that engine, when rebuilt with some high performance parts. One can add just a few things such as headers, good intake, dual exhaust, flowmaster mufflers, and a better igniton system, and hit 300 - 325 pretty easily. Glad to help out, Good Luck!!!

Posted on May 18, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

Add horsepower to stock 307


roller cam and lifters. bored or stroked. hi lift manifold and increased careburetion. tuned exhaust. ported and polished heads

Apr 30, 2015 | 1984 Oldsmobile Delta 88

1 Answer

What carburator is stock for 1984 ford bronco 2 2.8 liter


http://www.hotrodders.com/forum/carb-2-8-l-v6-1984-ford-bronco-ii-132065.html

according to the site, a <350cfm holley carb should fit right on the motor and give you no problems, this will provide some reliability and tunability as well as aftermarket support for your application compared to factory, they should be very easy carbs to find used on ebay and such

Mar 01, 2011 | 1984 Ford Bronco II

1 Answer

I need a vacuum circuits diagram for a 1984 GMC C3500 Truck, 5.7 engine


You can go to autozone web site..register your Vehicle and click on repair tab to get your vacuum diagram for free

Feb 02, 2011 | 1984 GMC C2500

1 Answer

This might be a dumb question. What is the stock horsepower rating on the ' 84 2.8


That pony was born with 115HP at 4800 rpm.
Plus 150 ft lbs of torque at 2600 rpm.
Hope thats what you're looking for.

May 20, 2010 | 1984 Ford Bronco II

3 Answers

Horsepower increase


install a free flowing aftermarket air intake kit, like one from K&N corp.

Mar 27, 2009 | 2004 Nissan 350Z

1 Answer

1984 datsun z24 carb swap


You can yes, but I think you will need to change the inlet manifold as well, sorry but its been a while since done a datsun.

Mar 25, 2009 | 1984 Nissan Pickup

1 Answer

1984 gmc sierra shifting hard in all gears


Your throttle valve on the transmisson is probley not adjusted to spec on this vehicle it runs from carb to right side of trans.


hope this helps

Feb 11, 2009 | 1991 GMC K1500

1 Answer

Which is a better/more efficient carberator on a VW Super Beetle?


Check with VW performance parts suppliers, there are better choices, the stock carb is made for MPG not horsepower.

Nov 24, 2008 | 2002 Ford Taurus

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

367 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

60792 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...