Question about 1991 Chevrolet S-10 Blazer

1 Answer

1991 S10 blazer tail lights dont work

I just bought a '91 S10 blazer and none of the tail lights work. checked fuse its good. looked over all wires running to the back of the truck they are all good. what should i check or replace to fix problem

Posted by on

  • 1 more comment 
  • jamjestamlor Aug 20, 2008

    I have no back tail lights, but the signal lights work

  • Anonymous Mar 12, 2014

    fuse box on s10 truck no tail lights

  • Anonymous Mar 20, 2014

    all fuses are good . driver side works fine.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I own a 1991 chevy blazer myself but my problem is opposet of yours my back lights stay on well i went underneath the dash board an i look up underneath my steering column an i saw to components one was to my cruise control an the one in back of it was to my back lights an i moved this around an to my surprise my light swork good now but now my speed odometer doesnt not work an my gas gauge am my oil aa water gauge my power windows dont work an niether my a/c or heater defroster im jus wondering if i need to move this component alittke more to the left or right yesterday everything worked hmmmm

Posted on May 29, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

The fuse for my tail lights and dash lights in my 91 Chevy S10 Blazer constantly burns out. I put a new one in and it burns out within a couple of minutes on the road. What's up with this?


you most likely have a wire short or a wire cross. Look for any wires that may have the insulation open and lying on metal. check the battery compartment and the battery cables to make sure they have not been pinched against something sharp. look at any recent parts you have replaced to make sure you have not accidentally smashed (grounded) a wire against the frame. also make sure the fuse is the correct amperage, and make sure that some small amount of debris hasnt lodged itself into the fuse box where the fuse plugs in. (do not attempt to dig any debris out of the fusebox without first disconnecting the negative cable from the battery, then the positive cable.)

Jan 18, 2011 | 1991 Chevrolet S-10 Blazer

1 Answer

I went to start my 91 s10 blazer 4.3 4x4 and I had dash lights till I went to start it then I lost all power to everything inside and outside. I checked the starter wires and battery wires are all good,...


something is completely draining your system at start-up, I believe that your starter is bad ( take it out and have it checked) or you have a real bad short or grounded wire that could possibly start a fire. A low, or almost dead battery can also cause this...take your battery cables off battery and clean anyway to insure good contact ( if aftermarket , even reassemble and clean cable to clamp connections) corrosion/resistance can be a thin film somethimes

Oct 03, 2010 | 1991 Chevrolet S-10 Blazer

1 Answer

Im having a problem fixing my left tail light on my 91 chevorlet pick up. i checked the fuse and changed the bulbs and still nothing


Check the GROUND circuit on the tail light assembly.....in the connector and at the light assembly.......sometimes you have to run another ground wire.75% chance it's that.

Aug 17, 2009 | 1991 Chevrolet S-10 Blazer

3 Answers

1991 Chevy Blazer dashboard lights are burned out. Can't read


Your dash needs to come out. These bulbs push into a plastic piece that "twists" into the back of the dash board. (About a 1/4 turn) Unless you can get at them from underneath, but I think it's to tight.

Aug 13, 2009 | 1989 Chevrolet S-10 Blazer

4 Answers

Dash and tail lights on a '91 Lincoln Town Car - quit working


From what you just said i dont belive the mechanic checked your fuses correctly.

Check your self to confirm, But if no avial i belive the controller for your lighting may be fried.

Feb 25, 2009 | 1991 Lincoln Town Car

1 Answer

How easy it to replace the tail light wires? 1991 s10


check fuses under dash or on the side of das or in the engine compartment should be able to get right to it

Jan 25, 2009 | 1991 Chevrolet S-10 Blazer

4 Answers

1998 Chevy S10 pickup backup lights don't work


Yes it screws in on right side of tramission and you will need a 7/8 inch deep socket to remove it. You may be able to clean the old one once it is removed. There is a little ball thatgets dirty and may you can get by with cleaning it. Good Luck. Ed

Sep 06, 2008 | 1991 Chevrolet S-10 Blazer

2 Answers

1991 Chevy Blazer S10 window motor installation


http://www.a1electric.com/s10motor.htm. This link has pictures and step-by-step instructions. I found it and have both sides to replace. Hope this helps.

Aug 08, 2008 | 1991 Chevrolet S-10 Blazer

1 Answer

91 chevy s-10 tail light short


You certainly have a short somewhere, and tracking down shorts are not ever easy. I would check the dash switch itself, especially if it was working fine before and nothing else was done.

May 29, 2008 | 1991 Chevrolet S-10

Not finding what you are looking for?
1991 Chevrolet S-10 Blazer Logo

555 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

60792 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...