Question about 1995 Ford Contour

1 Answer

1995 ford contour lifter noise

Hi, I Have A 1995 Ford Contour That I Just Bought For My Boy. I Bought It With A Noise Coming From The Back Cam Area. It Has The 2.0 Overhead Cam Engine With 2 Cams. The Noise Seemd To Be Coming From The Cam Closest To The Fire Wall Of Car Around The #2 Cylinder Valve Cover. It Is A Loader Ticking Noise But If You Run Can For A Little Bit Noise Seems For Lighten A Little But Don't Hurt Performance. Can You Help. Thanks Gary

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

If it had any head work done such as valve grinding. there could be a valve a tad shorter and may
result in a noise until the engine warms up. That is what i hear the problem is with mine. There
was no noise before i had the head work done.

Posted on Oct 02, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

On my 1998 ford contour my windshield wipers wont work and a loud banging noise is happening even when they are off


It sounds as if the wiper linkage has come adrift, normally will require renewal of a link arm

Oct 20, 2012 | 1998 Ford Contour

1 Answer

1998 Contour, clicking noise coming from front wheel on drivers side as I'm driving(it's a consistent click)


With out hearing the noise it is hard to say but it could be a wheel bearing but most of the time a bearing will hum, this could be a bad cv axle or a brake brake hitting the bracket, try to drive the car and hit the brake a little and see if the clicking goes away, if it does then i would say it is in the brakes. if it does not then have the cv axle checked.

Oct 14, 2012 | 1998 Ford Contour

1 Answer

1996 ford contour loud humming noise and vibration from front wheels


You have a defective wheel bearing most likely, the noise sounds correct for that problem. have a shop drive it before you replace anything to confirm my guess.

Sep 26, 2012 | 1995 Ford Contour

1 Answer

Lifters making noise how do you adjust them?


The engine/oil pump may be worn enough that the oil pressure is too low at idle. Suggest getting the system pressure read at your favorite service shop and get an estimate of required repairs. Have you been getting regular oil changes?

Mar 02, 2010 | 1998 Ford Contour

1 Answer

I need timing marks for a 1995 Ford Contour


they make tools to align the crank and the cam , thats the only way

Jun 28, 2009 | 1995 Ford Contour

1 Answer

My ford contour wont start up


98 FORD CONTOUR CAR DIED HAD FUEL PUMP REPLACED. TOLD IT NEEDED CAT AS WELL DONE ALSO. CAR STILL WONT START AND STAY RUNNING PROPERLY. WHEN IT DOES RUN ITS IN SHORT SPIRTS AND STRONG FUEL AND SMOKE COMES OUT OF TAILPIPE?

May 24, 2009 | 1999 Ford Contour

1 Answer

Busted timing belt


If you are in a town where there is an Auto Zone or an
O'Reilly's, you can ask them to print you out the view that you are needing. Or you might try to get it from the place where you originally bought the new belt at.
I know from personal experience that Auto Zone is good about printing you out the view.

Jan 11, 2009 | 1995 Ford Contour

1 Answer

1995 ford contour 2.0 l


http://www.focusfanatics.com/forum/showthread.php?t=171242&highlight=zetec+timing+belt

Go Here you will find it all you need and then some, this guy did good...

Ric

Jan 02, 2009 | 1995 Ford Contour

1 Answer

Back wheel bearings noise


i have a broken down ford contour 1998 i dont know if it will help but when you replace the bearings you have to replace both at the same time or it will end up making the same noise again. go to the parts store, and get TWO bearings. replace them and it should fix the problem.

Oct 20, 2008 | 1998 Ford Contour

Not finding what you are looking for?
1995 Ford Contour Logo

Related Topics:

367 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

61249 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...