Question about Lincoln Town Car

1 Answer

Went to change the stem seals on a 1993 lincoln town car with a 4.6l and when i put it back together it runs very rough and stalls out.. what happened?

Posted by on

  • Tim Dehnke Sep 17, 2010

    valve stems seals below the valve springs

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 2,299 Answers

What is the location of the stem seals? I am not real sure what you are talking about. I must have a different name for them?

Posted on Sep 17, 2010

  • 1 more comment 
  • Rodney Clark
    Rodney Clark Sep 17, 2010

    OK. Sorry. Is the vehicle smoking at all? Especailly when you start it? Is the check engine light on?

  • Tim Dehnke Sep 17, 2010

    no smoke or engine light just wont run for more then a few seconds

  • Rodney Clark
    Rodney Clark Sep 17, 2010

    Do you have the gauges to check fuel pressure? If so I would check your fuel pressure. Could be fuel pressure regulator, or the fuel pump. Should have about 55 psi.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I put regular gas in my 1999 lincoln town car and now it's running rough, what do I need to do?


Is the check engine light on ?
Normally the computer will try to change the timing to compensate for the lower octane of the fuel. Once you use half of the tank you could put premium in and mix it.
But if the check engine light is on and you have a miss, the problem could be something other than the cheaper gas.

Feb 18, 2013 | 1999 Lincoln Town Car

1 Answer

Where do i put the spark plug wires on a 1993 lincoln town car?


the ign coils on a town car has 2 of them this is not a standard Ign as the older one were if you have,nt removed them yet i suggest doing each one one at a time ....But if you have already removed them all you need to go a a parts store and buy yourself a manual for your type of vehicle and it should have some illastrations on where each goes ....hope this helped and good luck

Jul 29, 2012 | 1993 Lincoln Town Car

1 Answer

1990 lincoln town car 5.0, hard to start then


air idle control motor probably sticking remove motor and spray w-d-40 inside then reinstall and tap with a hammer while running

Dec 07, 2009 | 1990 Lincoln Town Car

2 Answers

1996 Lincoln town car stalls when slowing down and surges sometim


Have your EGR valve checked. I just replaced one on a 95 towncar. It's my girl-friends car. It was $50.00 at Auto Zone. Local shops wanted $300. to replace it.

Aug 10, 2009 | 1996 Cadillac DeVille

1 Answer

Leaking power stering pump seal--how to fix?


I suggest replacing the pump...after you have bought a seal kit and tools to remove the pressed on pully you will have spent twice the money....most auto stores will replace the pulley for you at a small charge

Jun 04, 2009 | 1993 Lincoln Town Car

1 Answer

I need to change the power stearing seal in my 1993 ford lincoln.


if the power steering pump to bracket bolts are behind the pulley you will need a special puller to remove the pulley and once the pulley has been remove there are three mounting bolts you be able to see if you have a autozone need you there you can rent the special puller you need and then take it back and get you money back also try this website to see if they have your car listed it www.autozone.com if they do you be able to get pictures and diagrams showing you how to repair it as well i also have a 93 Lincoln Town Car i hope i have been some help to you Michigan Man

May 05, 2009 | 1993 Lincoln Town Car

2 Answers

97 Nissan Truck Stalls Black Smoke


CATALYTIC CONVERTER MAYBE! BE MY GUESS AND IT ONLY HELPS THE TRUCK TO HAVE IT CHANGED!

Apr 06, 2009 | 1997 Nissan Pickup

1 Answer

1993 Infiniti J30 starts, but run really rough and then stalls


sounds like the guy has put the timing belt back together a tooth off have some one check this for you

Mar 11, 2009 | 1997 Infiniti.5 J30

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

18 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lincoln Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

fordexpert

Level 3 Expert

5495 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Are you a Lincoln Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...