Question about 2004 Chevrolet Monte Carlo

2 Answers

How do i turn off my high beams on my 2004 monte carlo?

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,509 Answers

The daytime running lights are on whenever the key is on and they use the high beams at reducd voltage. Turn the lights on at night and the turnsignal stauk pushed to the speedometer is high and back towards the driver is low. turn the lights off and the highs come on at reducd voltage as the daytime running lights. It's law in most states and many countries to run with the lights on if the car is moving. Pushing down just one click on the parking break pedel should turn them off. the ambiant light senser can be bad or damaged and the high beams stay on the senser is i the center of the dash right up to the windsheild, If it detects darkness it should switch the lights to full power lowbeams. automatically. there is no turn off for the lights except to turn the key off. If they stay on with the key off and the light switch off then the headlight relay can be sticking and its in the underhood fuse relay center and it's location is marked on the lid and it's called the DRL relay their are other relays in the box so you can just substute a different one to see if that will fix it and if it does get a new relay. the lights should work normally if they are turned on and the high beams should be brighter.

Posted on Sep 17, 2010

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

    Sergeant:

    An expert that has over 500 points.

  • Master
  • 449 Answers

Your turn signal switch should move foward try that

Posted on Sep 17, 2010

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

bunnydawg
  • 5158 Answers

SOURCE: my 2000 monte carlos has

replace the relay in the fuse box located in the engine compartment near the battery.

Robert

Please take a moment to rate this solution thanks

Posted on Jan 29, 2009

wireguy212
  • 1627 Answers

SOURCE: My headlights on my 2000 monte carlo does not work

Day time running lights run low voltage to the high beam bulbs so it sounds to me like you need two new bulbs or you need to check the fuses and see if any need replaceing.

Posted on Dec 07, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to correct a 2005 chevy monte carlo high beams from staying on


About 17,700 results (0.74 seconds) Search Results

    My high beams won't go off!! - Monte Carlo Forum - Monte Carlo ...

    montecarloforum.com > ... > General Forums > General Monte Carlo Talk
    Jun 8, 2012 - i flipped on the high beams last night and i think that switch in the column broke. ... My high beams won't go off! ... 2003 Chevrolet Monte Carlo. Help!! Need to get headlights working. - Monte Carlo Forum ...
    Jan 1, 2012
    Repair Guide: List of Common Monte Carlo Problems and Solutions ...
    Aug 9, 2011
    Fog lights not working, High beams stay on?
    May 9, 2011
    More results from montecarloforum.com

Jan 30, 2016 | 2005 Chevrolet Chevrolet Impala LS

1 Answer

2005 monte carlo drl won't tun on and i have no Low beams too. High beams, turning signals and hazards works. I replaced the bulbs, still drl and low bemas don't work. Checked all fuses and th


CHECK UNDER HOOD FUSE BLOCK FOR FUSES AND CIRCUIT BREAKER AND RELAYS....IF NOT IT IS AN ELECTRICAL DIAGNOSES. USE A MULTI METER TO SEE IF YOU ARE GETTING CLOSE TO 12 VOLTS AT SOURCE!
***NO EASY FIX...ALMOST EVER!!!

Jul 30, 2012 | 2004 Chevrolet TrailBlazer

2 Answers

2003 monte carlo turn signals blinking too fast,all bulbs good drl lights running on low beams not high beams


Just replace the flasher. you can find it under the dash on the drivers side... Just turn the key on and turn the signal light to one side or the other and follow the clicking noise.

Jul 10, 2011 | 2003 Chevrolet Monte Carlo

1 Answer

85 monte carlo ss headlight are stuck on high beams. Makes a little click sound when I try to switch back to low beams but swith doesn't turn off the brights. I just used the high beams switch 1 day and...


hi, this is a common problem the only way you can solve this is to get the switched replaced, this is a faulty part on your car so your going to need to get it replaced, once its replaced you will have no problems turning the lights on and off when you need to.

let me know how you get on or if you need further assistance ok

plz rate this post as i have pages of unrated posts, thanks

Aug 25, 2010 | 1985 Chevrolet Monte Carlo

2 Answers

How to turn off high beam lights


that should be on your wiper arm just flick the whole handle back and you should hear a click and see the lights on your dash flicker showing high beam and flick again and should be your reg beams

Jan 28, 2010 | 2004 Chevrolet Monte Carlo

1 Answer

I have a 2004 montecarlo ss the headlights turn off while driving at night sometimes for a second or for a couple of minutes.


is it while you are using your high beams, my is doing the same thing, tried wiring a toggle switch to suppement the turn/wiper stick instead of buying a new one. Worked great until i activated the momentary high beams while the switch was in the high beam position. Then power was cut to the entire car. Its like there was no batter. Can't find a single popped fuse or bad breaker, and the batter is good. Not sure what happened, according to the hanes maual i was wiring in accorance with, nothing should of happened like this.

Jan 17, 2010 | 2004 Chevrolet Monte Carlo

4 Answers

My headlights on my 2000 monte carlo does not work


Day time running lights run low voltage to the high beam bulbs so it sounds to me like you need two new bulbs or you need to check the fuses and see if any need replaceing.

Dec 07, 2009 | 2005 Chevrolet Monte Carlo

1 Answer

I have 2003 monte carlo dashboard warning


your on-board computer won't know it's replaced unless you activate the highbeams to complete the circuit,

Aug 14, 2009 | 2003 Chevrolet Monte Carlo

1 Answer

My 2000 monte carlos has no headlights. This includes daytime running lights. If you hold the high beam lever on the steering wheel on, high beams will work. Otherwise nothing works. Help...


replace the relay in the fuse box located in the engine compartment near the battery.

Robert

Please take a moment to rate this solution thanks

Jan 29, 2009 | 2000 Chevrolet Monte Carlo

Not finding what you are looking for?
2004 Chevrolet Monte Carlo Logo

1,074 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7697 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...