Question about 1991 Porsche 911

1 Answer

What fluid goes in the hydralic resivour - 1991 Porsche 911

Posted by on

  • Carol Laine Cabading
    Carol Laine Cabading Apr 05, 2015

    why my clutch cylinder will get smooth or lost its original hardness when my mb100 is not in use overnight

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 111 Answers

If it's brakes or clutch it dot 3 brake fluid.

Posted on Sep 17, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What dot 3 fluid


Dot 3 fuid is a specific type of brake or hydralic clutch fuid. Most manufacturers require you to use a specific brand or make of brake fluid or hydralic clutch fluid when servicing their vehicles, Dot 3 is a type of Brake Fluid use by many.

Oct 07, 2012 | 1995 Isuzu Rodeo

1 Answer

Mini cooper convertible top won't go up


do you hear hydralic motor if not use test light while operating control switch up and down position, you need a helper for this procedure.if power is at switch, see if power at hydralic motor while helper work the control switch, if no power at motor hook test light to good ground if no power at hydralic motor check fuse.if power at hydralic motor and you hear no sound hydralic motor bad.if power going to control switch and not to hydralic motor either control switch bad or you have broke loose wire at switch going to motor.if all electrical system okay and when you work the up switch and hear hydralic motor running your hydralic fluid level low reason why convertible top not going up.check fluid level at the side of the motor and pump you should see screw type check plug.you should have see through side reservoir fluid level should be between min and max marks.if fluid is low check for leaks at the pump hoses and hydralic cylinders.

Nov 27, 2011 | Mini Cooper Cars & Trucks

1 Answer

Convertible top not going up.


LISTEN FOR HYDRALIC PUMP MOTOR OPERATION IN THE TRUNK AREA..IF YES YOU HEAR HYDRALIC PUMP MOTOR RUNNING MAKING A NOISE.CHECK HYDRALIC PUMP FLUID LEVEL BY REMOVING THE SCREW TYPE CHECK PLUG.PLACE RAGS UNDER THE CHECK PLUG.AND UNSCREW REMOVE THE CHECK PLUG. FLUID SHOULD BE 1/4 INCH BELOW THE CHECK PLUG HOLE.IF FLUID IS LOW ADD FLUID UNTIL FLUID LEVEL 1/4 INCH FROM THE PLUG HOLE.IF HYDRALIC FLUID WAS WAY LOW YOU NEED TO BLEED AIR OUT OF THE SYSTEM.MAKE SURE FLUID LEVEL CORRECT.START ENGINE AND TRY RAISING AND LOWER THE CONVERTIBLE TOP USING THE SWITCH.IF TOO MUCH AIR GOT IN SYSTEM.HAVE A HELPER WORK UP AND DOWN CONTROL SWITCH WHILE YOU MANUAL OPEN CLOSE CONVERTIBLE TOP BY HANDS BLEEDING AIR OUT OF SYSTEM.KEEP EYE ON HYDRALIC FLUID LEVEL WHILE BLEEDING THE SYSTEM..LOWER THE TOP AND TURN OFF ENGINE. BEFORE OPENING THE HYDRALIC PUMP FLUID CHECK PLUG BECAUSE FLUID WILL SPRAY EVERY WHERE..IF HYDRALIC PUMP CHECK OUT OKAY AND YOU DO NOT HEAR NO HYDRALIC PUMP NOISE.POWER IS GOING TO HYDRALIC PUMP.EITHER HYDRALIC PUMP MOTOR FAULTY OR FAULTY HYDRALIC PUMP RELAY BEST TO LET MERCEDES BENZ DEALERSHIP CHECK IT OUT...

Apr 30, 2011 | 2005 Mercedes-Benz Mercedes Benz SLK350

1 Answer

When I step on the clotch it gets stuck and dosent come back out


CHECK CLUTCH MASTER CYLINDER.SOUND LIKE BRAKE FLUID LOW.IF BRAKE FLUID LOW LOOK FOR LEAKS AROUND CLUTCH MASTER CYLINDER AND CHECK FOR LEAKS AROUND BRAKE LINES AND CHECK FOR LEAKS AROUND CLUTCH RELEASE CYLINDER HYDRALIC LINE FITTING. REASON PEDAL GOING TO FLOOR YOU HAVE FLUID LEAK WHICH WILL CAUSE AIR TO GET IN THE CLUTCH HYDRALIC SYSTEM. YOU HAVE TO LOCATE LEAK FIX AND BLEED THE CLUTCH HYDRALIC SYSTEM.

Dec 27, 2010 | 1999 Volkswagen Passat

1 Answer

Where does the washer fluid hose connect to?


One side goes to the fluid resivour the other end goes to the windshield washer motor usally integrated with windshield washer moter.

Nov 24, 2010 | 1992 Chevrolet Lumina

1 Answer

Is there any way to adjust the clutch on 2006 Kia Spectra5?


YOU HAVE HYDRALIC CLUTCH WHICH IS A CLUTCH MASTER CYLINDER WITH SLAVE CYLINDER.IF YOU HAVING CLUTCH PROBLEMS.CLUTCH IS WORN AND SLIPPING OR YOU HAVE LOW FLUID LEVEL IN CLUTCH MASTER CYLINDER.WHICH CAUSES AIR GET IN HYDRALIC SYSTEM.CAUSING CLUTCH PROBLEMS.IF CLUTCH MASTER CYLINDER IS LOW ON FLUID.CHECK HYDRALIC LINE ON SLAVE CYLINDER TO CLUTCH MASTER CYLINDER FOR FLUID LEAKS.

Aug 03, 2010 | 2007 Kia Spectra5

1 Answer

Changed clutch on 1994 honda accord and when pressed down clutch peddle stay in, then also where is clutch oil located?


sounds like you need to blead out the hydraulic clutch fluid. the resivour is located next to the brake fluid resivour drivers side corner. blead through the slave cylinder on the transmission and check for leaks

Oct 29, 2009 | 1994 Honda Accord

1 Answer

Brake fluid


open the hood. go to the drivers side. you should see a large metal what looks to be a tub.from the tub there will be a metal pipe running from it. on that pipe there should be a plastic esivour with a lid on it.... the resivour should have MIN and MAX on the side of it. that is your brake fluid resivour and thats where the brake fluid goes... just remove the cap and fill it up. but be sure not to fill it up past the MAX line on the side.

Aug 08, 2008 | 2001 Buick LeSabre

Not finding what you are looking for?
1991 Porsche 911 Logo

Related Topics:

45 people viewed this question

Ask a Question

Usually answered in minutes!

Top Porsche Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

ROBERT GARCIA
ROBERT GARCIA

Level 3 Expert

881 Answers

yadayada
yadayada

Level 3 Expert

75822 Answers

Are you a Porsche Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...