Question about Chrysler Sebring

1 Answer

98 sebring tachometer is reading backwards - Sebring Chrysler Cars & Trucks

Posted by on

  • 209email209 Sep 19, 2010

    i mean the ignition coil. Instead of pick up coil. I always thought they were both one of the same

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

    Sergeant:

    An expert that has over 500 points.

  • Master
  • 449 Answers

Reverse the wireing

Posted on Sep 17, 2010

  • 209email209 Sep 19, 2010

    which wires do i need to reverse. Don't know if this helps, but the needle on the tachometer stays on the 7 when the car is turned off. . The tach seems to work normal, its just that the needle moves backwards when you rev the engine. The car runs normal too. The guy I got the 98 sebring from says its done that since he got the pick up coil and the distributor replaced.

  • Ralph Cronenberg Sep 20, 2010

    the ignition coil wire

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 96 Ford Explorer 4.0 tachometer goes backwards when I rev it up


Tachometer / Speedometer Problems: - Ford Explorer and Ranger ...

www.explorerforum.com > ... > Under the Hood

Jul 31, 2006 - 13 posts - ‎11 authors
Tachometer / Speedometer Problems: Under the Hood. ... upon restat the speedo goesto (is driven to) zero, the tach goes to ... 88 89 93 95 96 Aerostars ... in cold weather it seems to stick. but once the truck's interior warms up, .... 1995 Ford Explorer 4.0Automatic My Tach Quit Working And So Did My ... 5R55S harsh shifting; bump engaging reverse;
17 posts
Sep 3, 2011
Not starting - speedometer / tachometer needles going ...
3 posts
Jun 29, 2011
Tachometer Problem
12 posts
Nov 7, 2009
Solved 5R55E - No First Gear Problem
19 posts
Dec 7, 2000
More results from www.explorerforum.com

1999 Ford Explorer , Erratic RPM Problem - YouTube



Jan 01, 2016 | Ford Cars & Trucks

2 Answers

98 Sebring starting problems


So it ran up til the time the fuel pump went out? Did you test the fuel pump, or just figure the way it acted it needed a pup? Did it turn over before you replaced the pump? Did you pinch any wire running to the tank? Did you check the relay for the pump? for any other circuit? Fuses? Chrysler also has a roll over relay that cuts out the pump in an accident so you don't get fried by a pump spilling gasoline all over a wreck. Please check all of these things, then write back. I own a '96 Sebring Convert, and I've been through it in many places. Merry Christmas! Write back when you've run these things down, okay?

Dec 20, 2014 | Cars & Trucks

1 Answer

2007 CHRYSLER SEBRING 116000 MILES WANT GO FORWARD NOR BACKWARDS BUT DOES SWITCH GEARS AND MOTOR DOES RAISE UP.


If the car won't move but you can hear the transmission shift gears, something has broken where the drive axle shafts connect to the transmission.

Jul 16, 2014 | Chrysler Sebring Cars & Trucks

2 Answers

98 sebring jxi convertible. water pools in my back floor board


Sebring Convertibles have weep holes under the body that get clogged with debris and cause the water to back up into the floor. Take a paper clip and straighten it to clean out the weep holes. The weep holes can be found just under the frame at the doors where there is a seam(about where the jack would go). Along this seam about ervery 12 or 16 inches there will be a small slot for the water to drain.

Sep 21, 2009 | 1998 Chrysler Sebring

3 Answers

98 sebring O2 sensor location


what engine, is it the O2 sensor or the cat sensor, do u have the trouble code.

Sep 17, 2009 | 1998 Chrysler Sebring

1 Answer

The tachometer was showing about 1,500 RPM more it should be.


somebody had dash out and did not fit correctly.Have u just purchased the car?

Sep 06, 2009 | Toyota Camry Cars & Trucks

1 Answer

On my 98 chrylser sebring coupe i replaced the


THE CLICK IS THE STARTER SOLENOID, ALL THE CRANKING HAS BURNED THE CONTACTS, REPLACE THE SOLENOID, IT IS MOUNTED ON THE STARTER.

Jul 13, 2009 | 1998 Chrysler Sebring

1 Answer

98 sebring


check the cable at ecm if it is pulled to tight up or down this will put stress on the pins and result in a car that runs like it needs a tuneup

Nov 09, 2017 | 1998 Chrysler Sebring

1 Answer

98 civic lx where is ignition coil?? ++


IT'S A BLUE WIRE ON THE BACK OF THE CONNECTOR THAT WOULD NORMALLY GO TO THE FACTORY TACHOMETER IN THE DASH. YOU HAVE TO REMOVE THE DASH GAUGE CLUSTER TO GET AT THE CONNECTOR. THE CONNECTOR WILL NOT BE PLUGGED INTO ANYTHING IF YOU DON'T HAVE A FACTORY TACHOMETER (DX, CX, HX ETC...YOU WILL HAVE TO SPLICE INTO OR CUT THE BLUE WIRE FROM THE PLUG. IT GOES TO TACH SIGNAL WIRE ON YOUR NEW TACH.

Jun 11, 2008 | 1998 Honda Civic

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

277 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8572 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...