Question about 1988 Chrysler New Yorker

1 Answer

Need to change transmission control solenoid how to chrysler new yorker 1988 3.0 fwd

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chrysler Master
  • 2,100 Answers

Most control solenoids are in the pan, where the filter is located, there is a big hunk of steel with a bunch of little channels in it, the valve body, it holds the shift solenoids and a couple other things that are replaceable from the outside without pulling the transmission. So when you dump the pan, have a new filter ready to go in. Your problem may not be in the solenoid, It could be a ground, low on fluid, a bunch of things. Now, if you are talking a bout the transmission control module, it is a different story. Usually found on the wall next to the driver's feet, It is the computer for the tranny and it might not be the problem again. If you could get one from a junk yard or borrow one from an identical car just to try it, it would save you money. Check it out.

Posted on Sep 17, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

1988 XChrysler Newyorker 3.0 fireing order Distributor counter clockwise


Check this diagram for 1988 Chrysler New Yorker 3.0 liter SOHC V-6 VIN "3"...

zjlimited_774.gif

Hope this helps (remember to rating and leave us some testimonial comment)

Oct 10, 2011 | 1988 Chrysler New Yorker

2 Answers

1988 Chrysler Newyorker 3.0 fireing order Distributor counter clockwise


Check this diagram for 1988 Chrysler New Yorker 3.0 liter SOHC V-6 VIN "3"...

zjlimited_773.gif


Hope this helps (remember to rating and leave us some testimonial comment)

Oct 10, 2011 | 1988 Chrysler New Yorker

2 Answers

Chrysler New Yorker Trouble


Hello
The filter is on the right side rear reight below rear seat just before the tire in back
Here is a link with photo and price
http://www.autopartswarehouse.com/details/QQChryslerQQNew_YorkerQQFramQQFuel_FilterQQ19881990QQFFG6563.html

Jul 15, 2010 | 1988 Chrysler New Yorker

1 Answer

The car wont go over 35mph....after the motor gets warmed up...has a code 37....help!!!


There should be an electrical connector right by your transmission dipstick. Disconnect it & see what happens & get back to me/us.

Code 37 = part throttle lock/unlock solenoid driver circuit

Aug 08, 2009 | 1988 Chrysler New Yorker

1 Answer

Turn signal not working properly 88 new yorker


Check the flasher some Chyrs have split circuit when flasher goes bad it will effecy one side more than other.

Jun 16, 2009 | 1988 Chrysler New Yorker

1 Answer

I replaced the alternator but wont charge i had it checked before


volta regulater is in the pcm ( power control modual ) you need a pcm or a external voltage reg . the reg is what controls the alt out put

Jun 02, 2009 | 1988 Chrysler New Yorker

1 Answer

1988 Chrysler New yorker emergency fuel shut off


Chrysler does no use a fuel cutt off,(Ford does) the fuel only shuts off in the event of a rool over.

Apr 11, 2009 | 1988 Chrysler New Yorker

1 Answer

1988 new yorker atc trouble codes


12 Direct battery input to PCM was disconnected within the last 50 key-on cycles 14 MAP sensor voltage too low 15 No vehicle speed sensor signal

Dec 20, 2008 | 1988 Chrysler New Yorker

Not finding what you are looking for?
Cars & Trucks Logo

257 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7782 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...