Question about 2000 Ford F350 Super Duty Super Cab

Open Question

1999 Ford F350 Super Duty truck won't start. Put in a new cam sensor, map sensor, ruled out water in the fuel, dropped the fuel tank and put new fuel in. Fuel is getting up to the filter and the motor spins over but it won't start.

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 77 Answers

SOURCE: 2003 F350 Intrument Cluster

If everything keeps going like that then it sounds like its a problem with the onboard computer. The computer controls all the guages and would explain why they all fail at the same time.

Posted on Oct 20, 2008

  • 92 Answers

SOURCE: f350 super duty power stroke diesel loss of power steering when standing still

power steering pump inop.replace pump.

Posted on Oct 21, 2008

  • 31 Answers

SOURCE: what transmission fluid do I use 2001 F350 7.3L super duty

Mercon 5 or ATF 3 with a mercon 5 additive

Posted on Dec 17, 2008

  • 1118 Answers

SOURCE: 1999 7.3L Ford F350 Super Duty won't start

If its got glow plugs chk. with test light make sure there working, also there might be a fuel shut off selanoid that works from the key, when you turn the key it opens to let fuel flow to start, and shuts when you turn key to off, test light that too. And of course chk. all fuses and relays. New fuel filter is a must. Just make sure you fill filter with fuel before you install it. Its been awhile sense its run, its most likely lost prime, maybe a little either will help it pick up, but just a little. you don't want to blow the heads off it.

Posted on Feb 07, 2009

Healeyman
  • 1198 Answers

SOURCE: front wheel bearing removal on 2006 F350 touchtone 4X4

Get a good repair manual. Front ends on 4X4s require proper care.

Posted on Apr 25, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i change the fuel pump on a 2007 F350 super duty 6.0 diesel


siphon gas out drop the tank undo the harness twist the retaining ring pull pump. install in reverse.

probably be easier to just pull the truck bed off. usually requires unbolting 4-8 bolts holding bed on from inside the floor of bed. unhooking wiring harnwess and unhooking gas tank filler neck from hose leading to tank. you will need help of at least 3 others to pull the bed unless you devise a lift or a stand for your bed to sit on. think of it like a semi truck unhooking from a trailer. bed stays put truck moves forward. replace pump and back up under the bed and reattach. good luck

Feb 12, 2013 | 2003 Ford F350 Super Duty DRW SuperCab

1 Answer

7.3 lt diesel won't start. I've tried everything but no luck. Where is the injector drive module located??


check oil pressure lines o rings under fuel water seperator my 7.3 would not start an that was the problem lack of pressure 2 injectors

Sep 25, 2011 | 2000 Ford F350 Super Duty Super Cab

1 Answer

I Have a 1999 f350 Super duty Dually 7.3 Powerstroke. It starts hard in 80 to 90 Deg. weather and runs like it is 20 below. Then when pulling a emty or under a load has no power like id is running on 4...


It could be that you have picked up a batch of dirty fuel that has clogged the gauze input filter that is part ot the fuel pump inside the fuel tank.

Jul 29, 2010 | 1999 Ford F350 Regular Cab

3 Answers

Ford f350 diesel truck 30 amp fuse keeps blowing.


It is the fuel heater, All you have to do is unplug it.a4c0d50.gif

Dec 27, 2009 | 2000 Ford F350 Super Duty Super Cab

1 Answer

F350 super duty 2004 ford won't start, is firing but won't start at all. Changed fuel filter and pressed the reset button on the fuel tank and still won't start.


just to be sure.....attach a fuel pressure gauge to your fuel rail ....just to see if you have fuel pressure......if theres not enough pressure it won;t start at all.....even ten pounds shy.these gauges can be bought at your local auto store

Nov 14, 2009 | 2004 Ford F350

1 Answer

7.3 V8 DIESEL RAN OUT OF FUEL WILL NOT START


When you get some fuel you can unscrew the fuel filter and fill it with diesel. Then put the filter back on without spilling the fuel.

There should be enough diesel to prime the motor and get rid of the airlock. Also with diesels make sure you are using the correct tank if you have a tank switch.

Oct 22, 2009 | 2000 Ford F350 Super Duty Super Cab

2 Answers

Where and how do you put a cam sensor on a Ford f350 powerstroke diesel motor?


Camshaft Position Sensor located above front crankshaft pulley. Use 10mm socket on 1/4" drive ratchet. Crawl under front of vehicle, disconnect electrical lead, remove bolt, clean timing chain cover area, install new CPS. About $27 at Ford dealer. On some years this is covered under a recent RECALL by Ford...after years of litigation.

Aug 07, 2009 | 2000 Ford F350 Super Duty Super Cab

1 Answer

Diesel light sensor comes on


When was the last PM? With the oil change the fuel filters should of been done and before the filter in the engine compartment was removed the small yellow drain valve should have been opened. If it was then maybe you have a little water in the tank. that light should be an indicator for water in fuel.

May 08, 2009 | 2000 Ford F350 Super Duty Super Cab

2 Answers

F350 V10 starts but falters and dies


have put a new fuel regulator on this truck if you done everything else try that

Jan 11, 2009 | 2003 Ford F350 Super Duty DRW SuperCab

2 Answers

2002 f350 wont start


i had to replace my oil pressure regulator sensor it contols the oil pressure required to have the injectors open and spit fuel, if you replaced it and still no start replace the the cam position sensor

Jul 20, 2008 | 2002 Ford F350 Super Duty DRW Reg. Cab

Not finding what you are looking for?
2000 Ford F350 Super Duty Super Cab Logo

Related Topics:

108 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5467 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...