Question about Daewoo Lanos
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: hood latch won't release
This has happened to me several times, this will take two people, but all you need to do is have one person pull the hood release, while person number 2 pushes down on the hood, and then pulls up...that ought to do the trick
Posted on Jan 28, 2009
it can be done thru the front of the grille , locate the cable coming from the latch mecanism , and cut partially thru the cable to gain access to the inner cable that does the opening of the latch.
it takes a little time an it will be a bit frustrating but it can be done ! I hope all goes well with plowing !
Posted on Dec 19, 2008
SOURCE: Hood Won't Open, and Lever Broke
Hi viper852004 , the only way you can do this is to remove the front grills and then you will be able to see the 2 sprung bonnet pegs, you will need to loosen the adjusting nut where it screws into the hood and unscrew it until it becomes unattatched from the hood, do this for both pegs and then you should be able to release the hood to fix the problem. the pegs will need to be reinstalled before driving the car as the hood will not close, hope this is of some help, regards mark.
Posted on Jan 26, 2009
SOURCE: Broken Hood Release
In short no there isn't, however it's most likely your plastic release lever is broken and not the metal cable, you need to open the cover over the release lever, there will be a cable you can pull using a gripper and it will release the bonnet, you can easily replace the plastic llever and it's reletively cheap.
Hope this helps, please don't forget to rate me.
Posted on May 20, 2009
if the grille screws are accessable remove the grille which should give you access to the underside of the lock, you may need a screwdriver to push the lever aside to release the hood
Hope this helps
Posted on May 23, 2009
Tips for a great answer:
Mar 03, 2015 | Jeep Cars & Trucks
Jan 27, 2014 | Audi A8 Cars & Trucks
Jul 31, 2011 | 2006 Chrysler Crossfire
Jun 21, 2011 | 1991 Nissan Maxima
Nov 20, 2010 | 1997 Ford Explorer AWD
Nov 23, 2009 | 1997 Chrysler Concorde
Jun 04, 2009 | 1999 Daewoo Lanos
Mar 20, 2009 | 1999 Daewoo Lanos
Aug 11, 2017 | Daewoo Cars & Trucks
490 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: