At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
My 2004 honda accord air condition works fine most of the time but sometime it suddenly does not blow cold air anymore and if I turn it off for a while and turn it on again then it will work fine again. Please advise me. Thank you.
Re: My 2004 honda accord air condition works fine most of...
Check for 12v at compressor clutch. If good, check for open in electromagnetic COIL. Available separately and easy to replace. Buy online for $77 verses $135 over the counter.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
https://answers.yahoo.com/question/index?qid...Sep 13, 2008 - my 1994 honda accord ex has a problem. the heater vents dont switch ... defroster and feet etc.. none of those work anymore. nether does my AC, ... still no change. they will blow hot and cold air out of the front "in your face" ...
? 7:41
www.youtube.com/watch?v=41k6UxSUM8Y
Jul 30, 2013 - Uploaded by Nicolas Alvarez
Honda 98 prelude 5th gen A/C delete H22A New belt size = 37 inches (same as 97 accord) ... New belt size = 37 inches (same as 97 accord) ... How to: 1990 Honda Prelude - Diagnosis Air Conditioning Inop and a Vacuum leak ... Fixing A Car Air Conditioner That Blows Hot Air - Duration: 3:42. by Scotty ...
You will need to know if the compressor is working when it blows hot air to proceed. It could be an electrical problem, a blend door problem, or the a/c clutch on the compressor.
the a/c system may be low on a charge. have a a/c shop ck it. if its low, have them ck for a leak. if unable to locate a leak, they may need to rechagre it, and add a UV dye and you may have to bring it back several weeks later.
Hi
there.When a compressor is replaced,
two things are in fact being replaced - both the compressor and the refrigerant
(Freon) and if the problem is resolved as a result which of those two replaced elements
caused the original problem?Well you
will never know and so before the compressor is replaced you need to have you’re
A/C system recharged – it’s by far the most cost effective initial thing to do.In general A/C systems loose at least 10% of
their effectiveness each year through loss of refrigerant and so given the age
of your car; it’s the first thing to focus on.A professional A/C centre will also be able to tell you whether your
compressor is working properly after having a refrigerant recharge by the
monitoring the operating pressures in the A/C system.
Sorry for the delayed response. For future reference, the blower motor resistor in an 04' Honda Accord is located under the glove box and a little to the left if you are facing it (the glove box). You just need to pull out the plastic panel (yes, you can just pull it out by hand, no tools needed for that). It should be right on the fire wall with a plug going into it. If you reach in there and pull the plug (it has a little notch so it clips into the resistor more securely; make sure you push the clip in) it should have 4 flat prongs on it that go into the resistor. The resistor itself will have 2 phillips head screws that are holding it into the fire wall. Unscrew them and you have the resistor. If you can unscrew both screws before unplugging, it will be easier to see how it unplugs. I know this sounds complicated but once you get in there you will notice it's fairly easy to change out.
×