Question about 2002 Chevrolet Blazer

1 Answer

How do you glue a chevy cavalier 2002 rear view mirror back on front window

Posted by on

  • killerbeez4 Sep 17, 2010

    mirror hanging by wires

  • killerbeez4 Sep 17, 2010

    thanks!

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 14 Answers

They make a rear view mirror adhesive kit at most auto parts stores. step 1 mark original spot of mirror on the outside of windshield. step 2 clean old glue off with single edge razor blade carefully. step 3 use primer on windshield and mirror mount let dry for 5 minutes.
step 4 place a drop of adhesive on mirror mount and hold in position for at least 1 minute
step 5 do not istall mirror bacl on mount for at least 24 hours

Posted on Sep 16, 2010

  • 1 more comment 
  • killerbeez4 Sep 17, 2010

    mirror is hanging by wire and don't know where the screws are at

  • john clark Sep 17, 2010

    wires most likely for auto dimming mirror. there should be an allen screw or a torx screw (star type) holding the mount in the mirror assembly. will try to find pics for you.

  • killerbeez4 Sep 17, 2010

    How do you remount a chevy cavalier 2002 rear view\r\nProblem with the Chevrolet

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i repair a rear view mirror that has fallen off?


Clean window and back of mirror real good with alcohol Let dry Go to auto parts store and buy rear view mirror glue Apply small amount to back of mirror and press onto windshield Hold for a couple of minutes and then let dry for a couple of hours before you adjust it

May 06, 2014 | Pontiac Sunfire Cars & Trucks

2 Answers

I have a 1994 gmc Jimmy and my rear view mirror just fell off when I hit a bump


Go to any auto supply store and request rear view mirror cement and reapply the mirror with it.

Jan 10, 2013 | Cars & Trucks

1 Answer

My ex broke my rear view mirror but there's a


Possiably finger nail pollish remover will lossen glue.

Oct 01, 2012 | Cars & Trucks

1 Answer

The interior rear view mirror just fell off of my 2002 saturn sl, could someone tell my the simplies way to fix it. i tried placing it back on but it is not fitting on there properly. thanks


Hi Vicky.Your rear view mirror,as it is off is thear a small metal stub on the windshield? If so it means that the clip must be changed.If not then you will have to purchis rear view mirror glue and stick it back on. PS : WHAT IS BEHIND YOU IS NOT INFRONT.

Jul 05, 2012 | 2002 Saturn Sl

1 Answer

How do you remove the rear view mirror on a Hyundai XG 350


they are just glued on pull them off then when replace buy rear view mirror glue couple bucks but takes special glue

Sep 24, 2010 | 2002 Hyundai XG350

1 Answer

Seperate rearview mirror from plate both came off


f

Replacing the rear view mirror on a Ford Explorer is easy. The only obstacle you might encounter is fear of breaking the glued metal plate off the windshield. Do not sweat it. You can buy glues at the auto parts store to reattach the mirror to the windshield (Difficulty: Moderately Easy).

Instructions:
  1. Tap gently at the base of the mirror where it slides on over the metal plate glued to the windshield and pull upward. Some rear view mirrors have a small Allen screw that tightens the base of the rear view mirror to the metal plate. Disconnect the electrical plugs if your rear view mirror has them.
  2. Pull the rear view mirror clear of the metal plate. Clean around the metal plate glued to the windshield. If the metal plate has come off because of harsh weather or from hammering too hard at it, reattach it with glue designed for this job.
  3. Clean the area where you will be attaching the metal plate on the windshield. Apply the glue evenly on the surface of the metal plate that will go against the window. Be sure to clean and scrape off all the old glue before applying the new glue. Gently push the metal plate against the windshield in the spot you wanted it and hold tight for five minutes.
  4. Wait a day before putting the base of the mirror or replacement rear view mirror onto the metal plate. Do not force the base over the plate. Forcing it will likely dislodge it again. Press firmly until it will not slide along the grooves of the metal plate. Reconnect your electrical plugs and tighten the Allen screw if your new mirror has one. Adjust the mirror according to your safe viewing preference

Hope help with this (remember rated this help). Good luck.

Mar 12, 2010 | 1999 Ford Explorer

1 Answer

How do i get the rear view mirror back on?


I am assuming you are talking about the interior rear view mirror and not the side rear view mirror. Most auto parts stores sell an adhesive glue to fix the interior rear view mirror. Most of these mirrors have two parts to them. One part is the bracket that glues to the windshield and the other part is the rear view mirror assembly. Before gluing the bracket to the glass check and see how the mirror assembly attaches to the bracket. There will often be a screw that fixed the two together.

Feb 20, 2010 | 1999 Honda Prelude

1 Answer

How do u seperate the metal plate from the rearview mirror


use a special pad if you can get one or a new mirror ,do not glue it with epoxy type glues because the sun will expand it and then the windscreen will crack ,trust me ,got the teashirt here

Nov 22, 2009 | 2002 Kia Optima

1 Answer

I have a 2002 Pontiac Grand Prix GTP. I'm just trying to put the rear view mirror back on. I cannot get the small metal piece off of the entire mirror body to glue to the windshield.


It can be removed using a hammer and a drift. It is essentially a jamb fit with a stop. hard to imagine that you would not pull new piece off when you rehang the mirror on the small metal mount piece.

Be certain to follow directions preciecely! use mirror mount kit, forget all other glues, etc.

Sep 07, 2009 | 2002 Pontiac Grand Prix

1 Answer

Rear View Mirror Wires


buy some mirror glue(kit) and glue it back on. kit is available at fine parts stores everywhere. good luck and remember, it sets up quickly so no lollygagging,

Mar 21, 2009 | 1993 Chevrolet Lumina

Not finding what you are looking for?
2002 Chevrolet Blazer Logo

285 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8180 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...