Question about 2003 Chevrolet Blazer

Open Question

REPLACE FUEL PUMP ON CHEVY BLAZER 2003 - 2003 Chevrolet Blazer

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: 2003 Chevy Blazer won't start

have the computer checked out. may need reprogramming and have updates added. also check for loose or corroded connections at the terminals.

Posted on Sep 04, 2008

  • 124 Answers

SOURCE: 2002 chevy blazer fuel pump (4 door)

yes you have to drop the tank. you will also need a fuel line tool to unhook the fuel lines. before you drop the tank see if tou can reach and wiggle the electrical connection on the top of the tank. these pumps have a pigtail issue. please rate

Posted on Dec 08, 2008

c17hydro
  • 2984 Answers

SOURCE: HOW DO I REPLACE THE FUEL PUMP ON 2003 CHEVY S10

Removal & Installation To Remove:

  1. Properly relieve the fuel system pressure.
  2. Drain the fuel tank through the filler pipe.
  3. Support the fuel tank.
  4. Remove or disconnect the following:
    • Negative battery cable
    • Filler neck
    • Shield and tank straps
    • Fuel lines and vapor hose from pump and tank
    • Electrical connection from fuel pump
    • Fuel tank
    • Fuel pump/sending unit assembly by turning the locking ring (located on top of the fuel tank) counterclockwise using a spanner wrench
    • Fuel pump from the fuel lever sending device
To Install:
  1. Install or connect the following:
    • Fuel pump in tank with new seal around opening
    • Tank and connect fuel lines and vapor hose
    • Tank to the frame
      1. Torque to: 33 ft. lbs. (45 Nm)
    • Shield
    • Fuel filler neck and clamp
    • Negative battery cable
  2. Refill the tank.
  3. Run the engine and check for leaks.
1e2538e.gif

Posted on Jun 26, 2009

  • 2309 Answers

SOURCE: replace fuel pump in 2001 Chevy Cavalier

remove the gas tank, undo the ring that holds the sending unit , replace fule pump and new sock filter, reinstall

Posted on Nov 20, 2009

  • 468 Answers

SOURCE: replace fuel pump on a 2001 chevy cavalier

First, if your car still runs, pull the fuel pump relay, and start your car, letting it run until it dies. This will depressurize the fuel system. Then you must support the fuel tank, and take loose the straps that hold it up. Slowly lower the tank until you can unhook the tank filler hose and overflow hose by taking the clamps off and sliding the hoses off. lower it some more, and unhook the fuel lines; they require you to insert a special tool around the edge of the connection, however this can be improvised with screwdrivers or a piece of plastic or metal bent into a C shape. Next unhook the wire connection. Once you get it down, it's easiest to empty as much fuel as you can; as this will help you get it back into place. The fuel pump is inside the tank, which locks into place with a 1/8th turn. You will need a hammer and a brass punch for this job, as it needs to be tapped around to unlock. It will then lift out. Compare the two pump assemblies. The inside parts can be slightly different, but ensure that the fuel lines are IDENTICAL and the wire connection is IDENTICAL. The new one will come with a new silicone seal. Ensure that you don't put the new one in in such a way as the float doesn't bind, otherwise you'll be doing this procedure again if you don't like guessing how much gas you have. This can be a challenge to wrestle with putting the new one in, as you have to push it down to compress the new seal, and turn it to lock it. Once you get it started, you can let up and use the hammer and punch again to tighten it the rest of the way. Next, put it back together just as you took it apart, and don't forget to hook up the wires, hoses, and fuel lines. No tools required for the fuel lines, they just snap together. Once everything's tight and hooked up, put gas back in it, and if you haven't already, put the fuel pump relay back in. This you can do as soon as the car dies, and is completely optional if the car won't run at all. You are now ready to start it up, but turn the ignition on to the run position, wait a few seconds for the pump to pressurize, and then start it. Have fun, and feel free to ask any questions should you have any.

Posted on Feb 22, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What years can be interchangeable with a 98 chevy blazer


97-2003 are the same pumps on Chevy.On the GMC Jimmy truck,4.3 is also 97-2003.

Dec 06, 2012 | 1996 Chevrolet Blazer

2 Answers

How do i get to the fuel pump on a 1997 s10 blazer


Unless there is an access panel inside the vehicle above the fuel pump, you will have to remove the fuel tank in order to access the pump. Do not forget to replace the fuel filter. Partially clogged fuel filter is one of the causes of a failed fuel pump.

Oct 10, 2009 | 1997 Chevrolet Blazer

2 Answers

My 2003 Chevy Malibu suddenly lost power climbing a hill. The engine light started flashing. I was able to drive it home at 30 mph.


Could either be the ignition system - ie, coil packs, fuel filter, fuel pump, or bad gas. Was it sputtering?

Jul 28, 2009 | 1997 Chevrolet Blazer

1 Answer

Need to know how to remove the fuel pump in a 1998 Chevy Blazer


Your fuel pump is located inside your fuel tank. You need to drain and remove the fuel tank to replace it.

Jun 11, 2009 | 1998 Chevrolet Blazer

1 Answer

Chevy Blazer won't start; fuel pump needs replacing


Before spending several hundres on a fuel pump, I recommend doing a fuel pressure test. You can get a test gauge pretty cheap at a parts store. If the pump is junk, you raise the truck, lower the fuel tank, unplug the electronics from the pump at the top of the tank, then with a hammer and flat head scrwedrive, gently tap the lock ring in a counter clockwise direction until it pops off. Pull the pump assembly out and install the new one. Reverse directions to install.

Jun 02, 2009 | 2001 Chevrolet Blazer

1 Answer

01 chevy blazer fuel trouble


replace the fuel pump electrical wire harness.

May 25, 2009 | 2001 Chevrolet Blazer

3 Answers

2003 Chevy Blazer won't start


have the computer checked out. may need reprogramming and have updates added. also check for loose or corroded connections at the terminals.

Aug 27, 2008 | 2003 Chevrolet Blazer

Not finding what you are looking for?
2003 Chevrolet Blazer Logo

Related Topics:

552 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7768 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...