Question about 1998 Ford Explorer
I recently installed a transmission in a 1998 ford explorer. The vehicle is automatic 4wd 4.0 L OHV. The vehicle will not start. I have verified that the starter is working, the neutral safety switch on the transmission is in the right position and working, the fuses and relays are good and that all the connectors are plugged in. Can you offer any help?
Yes 1 more thing is here for you that can be don by you for activating you car on road,
1.check you battery have a suficiant voltages,
2.check your spark ignition kit,
Posted on May 17, 2008
Tips for a great answer:
Aug 12, 2016 | Dodge Cars & Trucks
Apr 22, 2015 | 1998 Ford Explorer
Sep 18, 2014 | 1998 Ford Explorer
Aug 09, 2014 | 1996 Ford Explorer
The engine and automatic transmission in this vehicles drive train are fully electronically controlled by a computer called the PCM and TCM (Power Train Control Module, Transmission Control Module). When a problem like this or other drive-ability related problems occurs the computer stores a record of the problem (there are of course some exceptions to this, like the fuel pump, engine coolant temperature sensor and MAF sensor for instance) in the form of a fault code in its memory, to read these fault codes you must have the systems memory scanned with a special tool. Once the fault code(s) are read you then must perform the appropriate diagnostic testing to find and resolve the problem(s) DO NOT REPLACE ANY PARTS UNTIL A TRAINED TECHNICAIN HAS DIAGNOSED THE PROBLEM TO AVOID SPENDING YOUR HARD EARNED MONEY ON PARTS THAT MAY NOT CORRECT THE PROBLEM
Did you flush the grit out of the transmission cooler and the lines to it? If not you may have ruined a new transmission.
Aug 30, 2012 | 1998 Ford Explorer
Jan 02, 2011 | 1998 Ford Explorer
Aug 07, 2010 | 2006 Ford Explorer
Jun 07, 2010 | 1998 Ford Explorer
Feb 08, 2010 | 1999 Ford Explorer
Dec 20, 2008 | 1994 Ford Explorer Limited
694 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: