Question about 2004 Chrysler Sebring

1 Answer

On a 2004 chrysler sebring conv. theres a light just above to the left of the temp. gauge, looks like a little motor, temp is fine not low on coolant. I don't have owners manual

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chrysler Master
  • 8,826 Answers

This is your check engine light. The light is indicating that the engine computer has detected a fault in the system. The computer uses a number of sensors to monitor what is happening with the engine and perhaps a few other systems in the car. A scanner is used to hookup to the computer thru a connector, usually under the dash by the drivers knees.
The scanner will read the fault codes stored by the computer. Many parts stores, such as Autozone and Advance, will provide a free scan of your car/truck. Your mechanic may have a more advanced scanner that can troubleshoot each code down to the component failure, but if you want to do it yourself (or perhaps with a little help from FixYa), write down the codes and look them up online. The following page lists the standard codes and their probable causes: http://alflash.com.ua/OBDII/EOBDcodes.pdf
This only gives you some ideas for troubleshooting. Let us know if you need help deciphering codes or troubleshooting your codes. When writing to FixYa, please identify your codes and provide information on any symptoms you are experiencing with the car/truck.

Posted on Sep 16, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

WHICH FUSE IS BAD IN 2004 SEBRING CONV HEATED SEATS. HEATER NOT WORKING.


Perhaps it is not the fuse, but you can try looking in the owners manual, If you have lost the owners manual, try going to Chrysler parts or 'MOPAR" online and looking at the manual there... good luck.

Dec 20, 2014 | 2004 Chrysler Sebring Convertible

1 Answer

My 2001 sebring conv. cooling fan only comes on when i turn on a/c


ECT sensor.
Engine Coolant Temp sensor is faulty.
When motor gets certain temp, this "Plugtype" sensor is supposed to turn on fan.

Jul 12, 2012 | 2001 Chrysler Sebring

1 Answer

My 2004 Sebring heater only blows warm air when the car is moving. If I stop at a traffic light or put it in park it blows cold air. Any ideas?


1st check the coolant level. If it's low, what you describe will happen. If level is ok, let me know, and include info on engine temp gauge--how long to warm up, is gauge at warm up low temp range, normal, or hot?

Feb 09, 2010 | 2004 Chrysler Sebring

2 Answers

My 2004 Chrysler Sebring blows our cool air only when idling AND driving in town. On the interstate it blows out hot air. Sometimes it will blow out warm air in town if I'm going 35 or 40 mph. Its a tad...


When the engine temp looks normal on the gauge but you get no heat inside unless your keeping the RPMs up by driving it,It usually means the fluid in the radiator is very low.wait until it is cooled completely and remove the radiator cap and fill completely,Check resovour and fill to correct level,

Nov 21, 2009 | 2004 Chrysler Sebring

1 Answer

Low speed ac blower motor does not work. Other


The heater blower motor has a blower resister. its in the heater box next to the blower motor, above the passengers feet. The bottom of the dash has a cover hold on with a few screws. the resister has a 4 or 5 wire plug and is heald in with 2 bolts, remove the connector then the bolts and it'll slide out. The new one may have to come from the dealer and have your VIN ready when you call. They'll have it or can get it in one regular day

Aug 29, 2009 | 2000 Chrysler Sebring

1 Answer

Dash lights flicker and or go out on 04 Chrysler Sebring Conv.


On thedash of my 2003 sedan sebring ,My dash ilumination lights for the speed,temp,tack\rpm and fuel are unlit.
I found that there is a paper thin plastic across and behind all four of these gauges which lights up all four gauges,if working correctly, There is a very poor connection to this thin film lighting system ,basicaly a wire terminal used as a staple and that very well could be your problem.
It as far as I know would require whole gauge assembly replacement! because dealers dont sell such small portions of some assemblies!
I myself will attempt to crimp this poor connection on my car without damaging thin film! there are no bulbs for those four gauges too iluminate!

Jan 10, 2009 | 2004 Chrysler Sebring

3 Answers

Oil light??


I was lucky on mine. It was just a bad oil sender switch that needed to replaced, plus the cable connector up-grade. Oil was leaking past the switch. Oil pressure was measured at full spec, both at idel and running.

Dec 27, 2008 | 2004 Chrysler Sebring

Not finding what you are looking for?
2004 Chrysler Sebring Logo

214 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

77499 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

chargerhp
chargerhp

Level 3 Expert

814 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...