Question about 1987 Ford Ranger

1 Answer

Does the 1987 4x4 ford ranger with the 2.9 v6 have one or two fuel pumps?

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 122 Answers

It has 2, one in the the tank and another inline between the tank and engine. Little tip: if your not getting fuel to the engine try replacing the filter first. it's a lot easier and less expensive and most likely where the problem is. I have an 1988 Ranger that clogs the filter almost every time I run the tank dry.

Posted on Sep 16, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 1991 ford ranger fuel gauge stays on full all the time and tank is empty does not go down ever?


You need a new sender unit and pump. If you take it out, you can check if the float has come off the stalk?

Ford Ranger Fuel Level Sending Unit - Fuel Sending Unit - Dorman ...

https://www.partsgeek.com/mmparts/fuel_level_sending_unit/ford/ranger.html
Ford Ranger Replacement Fuel Level Sending Unit Information ... are available for the following Ford Ranger years: 1997, 1996, 1995, 1994, 1993, 1992, 1991, ...

Ford Ranger Fuel Tank Sending Unit - AutoZone

www.autozone.com > ... > Ford Ranger Fuel Tank And Sending Unit Order Ford Ranger Fuel Tank Sending Unit online today. Free Same Day Store Pickup. Check out free battery charging and engine diagnostic testing while you ...

1991 FORD RANGER 3.0L V6 Fuel Sending Unit ' RockAuto

www.rockauto.com/.../ford,1991,ranger,3.0l+v6,1137765,fuel+&+air,fuel+sending+u... Sep 17, 2017 - OrStandard Cab Pickup; Fuel Sender/Float/Strainer; LH Mounted. ... Sending Unit, Float, Strainer & Tank Seal Fuel Pump Not Included Info.

1991 Ford Ranger Replacement Fuel System Parts - CARiD.com

https://www.carid.com > ... > Auto Repair Parts > Fuel Delivery > Ford > Ranger Products 1 - 60 of 1621 - Ford Ranger 1991, Fuel Pump and Sender Assembly by Spectra .... Includes an electric fuel pump, strainer, and sending unitFuel pump ...

Ford Ranger Fuel Sending Unit - 1A Auto

https://www.1aauto.com/ford-ranger-fuel-sending-unit/mo-c/250-26 Need a Fuel Sending Unit replacement for your Ford Ranger? Then shop at 1A Auto for a Fuel Level Sensor, at a great price! Visit us online or call ...

1991 ford ranger fuel sending unit Google Search

Oct 07, 2017 | Ford Cars & Trucks

1 Answer

No power to fuel pump when key is on 1987 ford ranger


ck the inertia switch located on the foot wal under the carpet

Sep 11, 2014 | 1987 Ford Ranger

1 Answer

Ford ranger 1996 4.0L v6 single cab long bed it runs but you have 2 have your foot on the gas it does not stay in idle for more than 5min less than that usually it does not take much gas pedal pressure to...


I would suspect that you have a failing fuel pump, the fuel pump pressure is bleeding off due to a faulty check valve, this causes hard starting esp when cold or after sitting. The fuel pump is located inside the fuel tank, the fuel tank must be removed to replace the fuel pump assembly.

Feb 09, 2012 | 1996 Ford Ranger SuperCab

2 Answers

Ford ranger engine codes P0171 &P0174 ?


Hi hope I can help.
P0171 mean bank 1 is to lean
P0174 means bank 2 is lean
You did not state what engine you have but by your codes you must have the V6 4.0.
These codes refer to a fuel issue. bank 1 and bank two represent each of your manifolds.
being you have a V6 you have 2 manifolds.
Each of your manifold have an O2 sensor in it. That's what is giving the lean reading.
This does not mean that you have bad O2 sensors.
They are just doing there job.
So you should check your fuel pressure with a gauge and make sure your pressure is correct.
It seams as your fuel pump maybe weak.
Hope this helps.
Please leave feed back
Thank you urnuts73@ FixYa

Mar 10, 2011 | 2003 Ford Ranger Regular Cab

1 Answer

My 1986 ford ranger 2.9 v6 engineafter driving for a while it sputters from gas and stalls.does it have (2) fuel pumps? 1 in the outside frame and 1 in the tank?


Yes there are two (2) fuel pumps on these pickups, one low pressure one in the tank that gets the fuel to the high pressure pump which is in the inside of the drivers frame rail beneath the cab towards the front of the cab.

Jul 01, 2010 | 1987 Ford Ranger

1 Answer

1999 ford ranger V6 truck cutting out or missing real bad when I try to excellerate


if it runs fine at idle and at constant speeds, I would start by changing the fuel filter, if that doesn't correct the problem. check the fuel pressure and see if it the pump going oout

Jun 14, 2010 | 1999 Ford Ranger SuperCab

1 Answer

Fuel pump


There are two metal straps that hold the tank in the vehicle. First you will need to disconnect the filler neck from the tank and any other black vent hoses that will pose a problem. Place a floor jack under the fuel tank and remove 2 bolts (1 in each strap). Then carefully lower the tank. You will need a special tool for the actual fuel lines where they are connected to the pump. It is called a quick disconnect tool. Once the tank is free of the vehicle you will see the pump housing on top. Most likely has about 8-8mm bolts that will need removed-and there is your fuel pump.. Labor guide calls for 2hrs -normally takes about 45mins to complete..

Dec 03, 2009 | 2001 Ford Ranger Regular Cab

1 Answer

2004 Ford Ranger Edge V6 3.0 2 WD RWD


I would change the filter first, if that doesnt help check the fuel pressure. if it doesnt hold around 30psi fuel pump could be bad.

Apr 07, 2009 | 2004 Ford Ranger

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

246 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

fordexpert

Level 3 Expert

5546 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...