Question about 1998 Toyota T100

2 Answers

Truck misses at 3500 rpm as if that is what the rev limiter is set at. I have replpaced plugs, and wires. I recently bought one new coil and took turns replacing one of the three old ones on the truck, but, nothing has helped. The truck occasioanlly turns on the check engine light. code = camshaft position sensor.

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,565 Answers

The camshaft position sensor is a $40 - $70 part at rockauto.com, depending on your engine. first check the connections to the sensor to make sure the computer is getting a good signal. You may have to remove the sensor and look into the mounting hole to see if there is an obstruction that may be blocking a proper signal. check the wiring to see if it may have corrosion or a short to ground.

Posted on Sep 16, 2010

Ad
  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 31 Answers

The camshaft position sensor it seems to colapse u better change it before u rec the car

Posted on Sep 16, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1999 bmw 316i compact flat spots & hesitation from 3500 RPM


the flat spot is a missing instruction in the CPU program in the ECM. Run the fault codes to check for faulty sensors or have the CPU program reset using the scanner. Loose wires would give a problem all over and not just at particular rpms

Dec 24, 2014 | BMW Cars & Trucks

2 Answers

Starts missing /large dead stop when accelerating


The missing while accelerating is likely due to ignition coils and/or spark plugs going bad. The missing while in park is a normal thing. The car has a rev limiter that will not allow the engine to rev to higher than 3000 RPM while in park.

Apr 11, 2014 | Lincoln LS Cars & Trucks

1 Answer

Car stuttering


The rev limiter kicks in at about 6800 RPM to prevent "coast over" to unsafe revs, so I suggest you have a custom programmed PCM that eliminated the rev limiter feature or moves up the RPM limit.

Apr 19, 2017 | Cars & Trucks

1 Answer

I have 1998 GMC k1500, I took it in for Smog test in California,


slite posibility of head gasket leaking a little or could be a worn piston ring you have changed every thing else

Sep 02, 2012 | 1998 GMC Sierra

1 Answer

ENGINE MISSING ABOVE 3800 RPM


no the code is most likely from a dpfe sensor for you egr system not the egr valve itself.a clogged fuel filter though might cause your low revs

May 02, 2009 | Ford Taurus Cars & Trucks

2 Answers

Runs real lean and surges under throttle massive loss of power


if you have a vacuum guage handy hook it to your manifold and if your reading is under 15 hg then you have a manifold gasket leaking or you could just replace the gasket.

Apr 28, 2009 | 1995 Toyota 4Runner

1 Answer

1997 chevy K3500 won't rev past 2300 rpm, scanner values show 0?


rpm limit ... built in to unit so you
don't blow the engine.

Mar 13, 2009 | 1997 Chevrolet C/K 3500

1 Answer

1997 ram 1500 5.9 wont rev past 2000 rpm


well, the timing on your ram is computer controlled. is the truck in drive when this mis-fire occurs? or at idle? youve addressed part of your ignition w/the cap-rotor-plug wires. did you examine the old cap for carbon tracking? did you install the rotor properly? i know on my '97 ram the dist is feakin' buried in the engine it would be easy to rotate the rotor while installing/removing it so the timing mark is off. does your engine have the right plugs installed? your plug wires follow the correct firing order with your dist? you did not mention anything about your ignition coil. here is how to safely remove and check your ignition coil. disconnect battery-at the coil disconnect the lead wire (TOP) and primary (BOTTOM) from the coil. label your wires, or take a pic of your ign coil before you remove it so if you forget where the wires go, you have reference point. remove mounting screws and remove coil. clean coil to remove rust/dirt and wipe coil terminals off. inspect case for damage. with a multi-meter, check coil primary resistance by selecting ohm's and then place + and - leads on the pos/neg terminals on the coil, dodge used 2 brands of coils either a "diamond" or a "denso" primary resistance for the diamond mfr'd coil will be between 0.97-1.18 ohms. secondary resistance 11,300-15,300 ohms. Denso primary resistance 0.95-1.20 secondary resistance of 11,300-13,300 ohms. to measure secondary resistance place one of the leads to one the primary terminals and the other lead attatch to the large center terminal. compare your readings to the above values. if your readings are not within range of the above values, your problem is the ignition coil. other causes you may consider is faulty: speed sensor, throttle pos sensor/trans issues like bad pressure solenoid (actuates gear changes) a fault in your overdrive system. hope i have helped!

Feb 24, 2009 | 1997 Dodge Ram 1500 Club Cab

Not finding what you are looking for?
1998 Toyota T100 Logo

227 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8514 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...