Question about 2007 Saturn Outlook

Open Question

Cant find my serpentine belt on my 2007 saturn outlook

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Mike258
  • 1498 Answers

SOURCE: serpentine belt diagram

fe54db2.jpg

Hope this helps

Mike

Posted on Jul 11, 2008

michigan man
  • 3533 Answers

SOURCE: saturn 2001, serpentine belt diagram

for the most part there is a diagram under the hood unless the label has peel off in a case like that you can ask for a diagram were you are getting the new belt what i do is draw me a diagram before i take the old one off and i have also went to the libaray and there you can get print outs and diagrams of your car.

Posted on Feb 23, 2009

redlinetech0
  • 33 Answers

SOURCE: 2001 Saturn, need a Serpentine belt diagram

get a floor jack and a small block of wood. place the floor jack under the oil pan. jack up the jack until you feel it on the oil pan. remove the engine mount. you will need a deep 15mm socket and a 6inch extension. the mount has 4 bolts. remove it. then jack the engine up with the floor jack until the power steering reservoir almost touches the cowl. now take a long 14mm wrench and place that on the bolt head on the belt tensioner. pull the wrench until the belt slacks up. remove the belt. Installation opposite of removal. Here is a belt diagram. I hope this helps!! If you have any problems or questions e-mail me at: Redlinetech07@yahoo.com
7744b58.gif

Posted on May 23, 2009

  • 72 Answers

SOURCE: want to replace bulb in headlight in 2007 saturn outlook how hard is it"

It's not hard. Open the hood, locate the backside of the lite thats out(follow the wires) give the housing a slight counter-clockwise turn to remove it.
The bulb should pull out. Use a tissue to re-install the new bulb, as the oils on your fingers will cause the new one to overheat and burn out, prematurly

Posted on May 27, 2009

  • 1757 Answers

SOURCE: how to remove and replace a serpentine belt 96 saturn

Click on the following free, direct Link. It has all the Serpentine Belt Diagrams you will need for the 1.9L 4-Cylinder Engine and various Engine Options (AC/No AC etc.), complete with Instructional and Directional Diagrams.

http://www.2carpros.com/car_repair_information/year/1996/make/saturn/model/sl/1996_saturn_sl_drive_belt_routing_diagram.htm

Let me know if this helped or if you have additional information or questions. Feel Free to contact me at FixYa.com!

"HOW TO":
Standard Rules to Removal the Serpentine Belt with an Automatic Tensioner:
1. Find the Tensioner(s). (See Diagrams on Link)
2. Using a Serpentine Belt Tensioner Tool, Or Wrench OR Ratchet, Rotate/Move the Tensioner USING THE AVAILABLE NUT (on the Pulley or Arm Base) OR the OPENING (3/8ths or 1/2 inch square opening) rotating the Tensioner Pulley/Arm - moving it away from contact with the belt and towards the area where the belt is not in contact with the Tensioner Pulley. The Tensioner is spring loaded, and is hard to rotate/move.
3. Remove the loosened belt off one of the other more easily accessed Pulleys.
4. DO NOT quickly release the Tensioner, but gently allow the Tensioner to rest in its closed position.

Standard Rules for Installing the Serpentine Belt with an Automatic Tensioner:
a. Pick a Pulley that is most easily accessed. This will usually be on top. This will be the last Pulley that the belt will go on.
b. Using the Diagram: Install the new Serpentine Belt on the remainder of the Pulleys....over, under, left right.
c. Using a Serpentine Belt Tensioner Tool or Wrench or Ratchet Tool: Rotate/Move the Tensioner Pulley/Arm "away" from Belt contact area on the Tensioner. This spring is pretty hard and with a new belt, it will be even harder to install. Rotate/Move this to as-close to the maximum allowed inorder to have enough slack in the belt to get it up and over the last pulley.
d. Using your other hand - Pull the Belt up and over the Last remaining Pulley.
e. Before releasing the pressure on the Tensioner, visually inspect the remainder Pulleys and the Belts' Positioning on them.

Posted on Apr 05, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

My serpentine belt broke and then my odometer does not work.


2002 L200 BROKE timing belt - SaturnFans.com Forums

www.saturnfans.com > ... > Models > Saturn L-Series > L-Series Tech

Sep 4, 2007 - 18 posts - ‎11 authors
2002 L200 BROKE timing belt L-Series Tech. ... This forum has been a huge help formy SL1, but it is a running machine. Question is for 2002, L200, which I .... I have the2000 Saturn LS with the V6. The owners manual says ... 2000 LW2 slipped timing belt-bent valves mystery!
6 posts
Oct 29, 2010
Changing the v6 serpentine belt
18 posts
Apr 5, 2009
serpentine belt tensioner warranty issue
7 posts
Feb 13, 2009
1997 Saturn SL2 Serpentine belt snapped?
12 posts
Jun 22, 2008
More results from www.saturnfans.com

Dec 05, 2015 | 2000 Saturn L-Series

1 Answer

SATURN VUE 2007 WONT START, makes squecking or grinding noise, the serpintine belt turns very slowly, I have been taking it apart and came across the throttle, I notice there was not only residue of o


It sounds to me like your battery is down? Make sure the battery has a full charge. Take the serpentine belt off and see if it cranks any better. Make sure none of the accessory pulleys are frozen.

Dec 16, 2014 | 2007 Saturn Vue

1 Answer

My 2007 saturn outlook liftgate will NOT open


the lock actuator may have failed remove the inner panel and see if theres power going to the actuator

May 20, 2012 | 2007 Saturn Outlook XE

1 Answer

The Serpentine belt broke on my 2006 Saturn Ion and am trying to replace but cant find the belt diagram?


You don't need a belt diagram. Just thread the belt with the back 'smooth' part to the smooth pulleys, and the 'grooved' part of the belt to the grooved pulleys until the last pulley you have is the tensioner pulley that is turned using a breaker bar in most cases.

Aug 19, 2010 | 2006 Saturn ION

2 Answers

How to change a headlight for Saturn outlook for 2007


I have an Outlook that was burning through bulbs. The best way to change it, is to remove the inner fender well and it gives you easy access to the rear of the headlight assembly. It takes about 2 min and no skinny hands required.

May 25, 2010 | 2007 Saturn Outlook

1 Answer

Remove the serpentine belt out of 98 saturn


you have a belt tensioner that you have to release to get belt off. you can get tool cheap from canidian tire or part souce

Apr 25, 2010 | 1998 Saturn SL

3 Answers

Want to replace bulb in headlight in 2007 saturn outlook how hard is it"


I agree with the other fae90. Tried to remove the light assy, then I read his post and did it inside 20 minutes. Took me longer to put it all back again

May 27, 2009 | 2007 Saturn Outlook

Not finding what you are looking for?
2007 Saturn Outlook Logo

Related Topics:

225 people viewed this question

Ask a Question

Usually answered in minutes!

Top Saturn Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8211 Answers

Are you a Saturn Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...