Question about Ford F-150
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
If your refering to the light on top of the dash that says "psgr air bag not connected" here;s the deal.
The module is activated when someone sits in the seat. Turn the key on and the notification will light. Go around to the psgr side of the car and sit in the seat and the light should go out.
Posted on May 03, 2009
The passenger side airbag is a lot easier then driver side. Take the glove box out and you will see two 10mm bolts holding it in place. When you open the passenger side front door, remove the panel on the side of the dash and you will see yellow connectors.The 1 closest to the front is attached to the air bag, it is clipped into the frame. Just pull it loose and take it out and your done. For the Driver side, it takes a skinny T27 to remove the two star bolts, then just disconnect the horn red clip and ground and install new airbag. The module is located under the passenger seat, underneath the carpet. Kinda stupid but thats where its at. You also need to replace the front impact sensor located behind the grille on the back side of the metal bar to each side. Follow the hood latch down. Also just to make sure, you know to disconnect the battery before you do all this. You don't want new airbags to accidentally deploy.
Posted on Jun 20, 2009
It is located on the transmission with a vaccume line going to it. There is a clamp with a bolt that holds it to the transmission. It is an easy fix.
Posted on Oct 10, 2009
SOURCE: I am trying to reset
If the airbag has been deployed, is is necessary to REPLACE the airbag (SRS) ECU. It is located below the center console. (See picture) It must be replaced because on your vehicle, it contains the crash sensors. If you do not replace it and hook-up new airbags and turn the key on, the new airbags will immediately deploy. There is no way to "reset" it.
Posted on May 24, 2011
Tips for a great answer:
Feb 03, 2013 | 2001 Ford Crown Victoria
Aug 31, 2012 | 2001 Ford F150 Styleside SuperCrew
Jan 29, 2012 | 2001 Ford F150 Styleside SuperCrew
Nov 25, 2011 | Ford Explorer Cars & Trucks
Oct 15, 2010 | 2001 Ford Escort ZX2
Mar 08, 2010 | 2001 Ford F150 Styleside SuperCrew
Mar 04, 2010 | 2001 Ford F150 Styleside SuperCrew
Jan 17, 2010 | 2001 Ford F150 Styleside SuperCrew
Oct 11, 2009 | 2001 Ford F150 Styleside SuperCrew
364 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: