Question about 1996 Mercedes-Benz C-Class

1 Answer

How to connect ignition coil to spark plugs of a mercedes benz c class 1996 model

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 25 Answers

Take the top cover off (says mercedes on it ) you will find (on a 4 cyl ) 4 separate coils nomally held in by 2 bolts and attatched to the LT wiring loom

Posted on Sep 18, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I have a 1997 mercedes benz that stalled and won't start what could be wrong.


I had the same problem with my 1997 Mercedes Benz C280, the problem was the catalytic converter and ignition coil or spark oil.

25103638-4qufoswjtoauf4w2kcppdheq-3-0.jpgIgnition Coil

25103638-4qufoswjtoauf4w2kcppdheq-3-1.jpg Catalytic Converter
Hopefully that's will solve your problem, good luck.

Sep 15, 2014 | 1997 Mercedes-Benz C-Class

1 Answer

I can not spark my car


DO A TUNE UP CHANGE SPARK PLUG WIRES AND SPARK PLUGS, REPLACE DISTRIBUTOR CAP AND ROTOR.IF ALL IS GOOD.IGNITION TIMING OFF WHERE DISTRIBUTOR COULD HAVE MOVED OR YOU HAVE BAD IGNITION COIL.

Jul 13, 2011 | 1994 Mercedes-Benz C-Class

1 Answer

Mercedes c220 elegance engine cranks but won't start. There is no spark at the plugs could be the coils or what?


most likely it is the ignition spark control and not just the coils. chances that all you coils went out at the same time is nil. ignition module i would check around for prices but a new one might be a dealer only part..check the web....

May 04, 2011 | 1994 Mercedes-Benz C-Class

1 Answer

There is no power going to spark blog why? and how can i check the ignition coil?(the ignition coil and the part which all cables for spark blogs out from it are new) car not started


Test lite , remove one wire and see if any power coming out. Becaus e if your not getting fire to the plugs your not getting any from the coil. Good luck to ya,

Mar 26, 2011 | 1998 Mercedes-Benz E-Class

1 Answer

Hello i have a 1993 Mercedes Benz 400sel. i have changed the distributor caps, rotors, and spark plugs/wires. it is only running on 4 cylinders right, now and i don't know why. There is no spark on all 4...


HI, did you try checking the ignition coils. I had the same problem in my car I replace the one ignition coil where there was no power and that solve the problem. try not to buy cheap ones those will blow fast. you can find the Bosh original ones in the internet for a fare price. today at the dealer are about $212.00 each.

Feb 11, 2011 | 1993 Mercedes-Benz Mercedes Benz 400 Class

1 Answer

Spark plug location 2000 c230 kompressor gasoline mercedes benz


Today's modern engines bury them in the center of the engine under the ignition coils. Most coils are screwed on the the valve cover by simple screws. Unplug wire from coil if possible. Remove screws and wiggle and turn coil. A long insulator should come out with coil. About 8" down the hole is the spark plug.

Mar 12, 2010 | 2000 Mercedes-Benz C-Class

1 Answer

Mercedes c200 elegance 1996 model mis-firing on cylinders 1-4


I beleive your firing order is 1 3 4 2. 1 and 4 are companion cylinders-meaning the piston is up or down at the same time i.e. compression and exhaust stroke both pistons are up and even on the exhaust stroke the ignition fires in order to burn unburnt fuel/ h ve you checked your trigger. There is a good coil testing tool that is placed over the coil and has a magnetic pickup that allows you to see if the coil is being triggered-just because you have power doesn't mean that you will have spark. I would replace your ignition wires and look at your wiring harness very carefully- if it is very brittle and you see bare wires exposed that is your most likley problem because the trigger is working for 1 and 3 and has the crank senser input for all for spark plugs and the cam senser is used for ignition advance and your fuel injection system. try wiggling your harness and see if your coils start to work. wireharnesses are a major problem on mercedes benz vehicles of that era. I hope I have been helpful

Jun 18, 2009 | 1996 Mercedes-Benz C-Class

1 Answer

Location of spark plugs on a 1994 c220


hello,you need to remove the intake hose on top of cylinder head,then remove the aluminum cover in center of head ,then ignition coil and spare plug is located,ty

May 07, 2009 | 1994 Mercedes-Benz C-Class

Not finding what you are looking for?
1996 Mercedes-Benz C-Class Logo

Related Topics:

336 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercedes-Benz Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

yadayada
yadayada

Level 3 Expert

76691 Answers

Michael Contreras
Michael Contreras

Level 2 Expert

166 Answers

Are you a Mercedes-Benz Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...