Question about 2008 Jeep Commander

1 Answer

I have an 06 jeep commander and when I bought it it had no software installed in the nav. and it prompted me to install the disk. I bought an 05 disk and it will not take it because of there being a later edition that was previously installed. The question I had was if there is a way to reset the unit to where i can install the earlier version?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Jeep Master
  • 5,763 Answers

There may be a way but nothing can be done without a ford scan tool,its like a computer with a newer version software and you try to install an older one,its always in the memory, so the nav must of had a program in it already, you may be able to use it if you could find a way to unlock it,

Posted on Sep 16, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I have a 1987 chevy spectrum i can start the car and after it idles down it dies and wont stay running what could be my problem


How can we help someone who knows nothing?

You need a repair shop

Is that not what you usually do--- a few times a years?

Nov 25, 2012 | 1987 Chevrolet Spectrum

1 Answer

Were is the nav disc


found this in a jeep forum

The navigation disc loads into the lower tray on the REC radio. A special tab needs to be pushed downward and pried outward to release the cover. The tab is located on the left side of the DVD tray

Oct 25, 2012 | 2009 Jeep Commander

1 Answer

My 06 jeep commander makes a noise like brakes dragging when backing up first thing in the morning.


thasts because they are possibly dragging and to find it you would need to jack vehicle up and turn each wheel in turn ,it could be anything from a piston in a brake caliper to the handbrake shoes which are inside the rear brake disk

Aug 10, 2010 | 2006 Jeep Commander

2 Answers

Bluetooth passkey--'06 530XI--can you find the passkey?


The number was on a white card stuck in with the manual binder. Or if you don't have it, its located in the trunk, behind the left nav access panel on a silver "TCU" module about the size of 2 vhs tapes stacked together. if you look at the eject button on the nav player its located just to the right and is installed on about a 45 degree angle.

there is a white lable with the "PK" on it. i used a small telescoping mirror but you can also slightly pull back the trunk liner above the unit and it will be easily located. If any of this options works go to Bmw dealer for service and we found it in car computer.

Jun 04, 2010 | 2006 BMW 5 Series

1 Answer

2006 Jeep Commander AWD 4.7 L. Navigation system is NOT WORKING


Its usually not the nav unit. Best way to find out many dealers have a demo nav disc ask them to pop it in if it works then u know the disc is at fault not the nav unit. The bad news it the disc costs about $300. Hope this helps please rate if it does.

Aug 20, 2009 | 2008 Jeep Commander

1 Answer

Bluetooth problem


Turn on your NAV screen and go into the info main menu in the Nav system. If no NAV refer to the drivers handbook, since you will sinc by using the voice command buttons on the steering wheel and the car will offer you prompts.
Click on telephone, settings, Bluetooth, ADD PHONE.
Then go into the menu for the Curve, tools , add devices,enable handsfree, search new device are the icons you need. You will need to authorize the Curve to accept a new device by entering a 4 digit pin code, which will show on the car`s screen. Once completed, the car will acknowledge the Curve in it`s screen

May 07, 2009 | 2007 Lexus ES 350

1 Answer

Nav disc


ther is no nav disc on a mygig.. its a loaded software disc. it contains the grace notes and nav info .. you can update it for free but you will have to burn your own disc with the iso of the nav data.. and to remove it just pull the trim ring off the shifter and then lift the bezel then remove the screws under the panel there are 2 of them then pull off the radio bezel.. the radio is held in with 4 screws.. this radio has no rca outputs on it it uses serial data to modules the rear enntertainment is digital signal sent to a module like rear dvd video and audio

Jan 27, 2009 | 2007 Jeep Commander Rocky Mountain

1 Answer

Nav disc


On some cars, it does that with 4.62 version of the disc. Make sure first of all it is version 4.63. In the worst case, you can simply reload the original software back in it again and that should resolve your problem with globe screen restarting over and over.

May 22, 2008 | 2005 Acura RL

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

152 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...