Question about 1997 Jeep Grand Cherokee

1 Answer

Rear light install for 1997 jeep grand cherokee

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,509 Answers

Just changing the bulb or didya crash out the whole light and need to change the whole thing? Both are easy with the tailgate open there's two screws that screw into the light, with them out the light pulls out to the side some then straight back ( it pops out with the screws removed. once the light is away from the body the bulb scocktes can be removed by depressing the tab on the side of the scocket and turning the socket to the left. The bulb just pulls stright out and the new one is a 3157 a 3057 will work the back up light and the yellow turn signal are 3156 put in the ones you need turn em on and test that they work, There's a plug in the harness that can be disconnected and reconnected that may cause the light not to work as for changing the whole light just take out all the blub bases and the light is in your hand. A new light will come with the blub bases and bulbs all you need to do is plug in the harness and pop the light in pust it forward till the screw holes line up and install the screws and your done.

Posted on Sep 17, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where are the rear abs sensorson 1997 jeep grand cherokee


I believe it is right on the top of the 3rd member.

Oct 01, 2014 | 1997 Jeep Grand Cherokee

1 Answer

On my 1997 jeep grand cherokee laredo rear brake pad warning light still on after pads have been changed


I've never seen a jeep with pad warning indicator; are you sure that's what it is? what does the light look like?

Mar 14, 2013 | 1997 Jeep Grand Cherokee

1 Answer

Need tofind out code 51 for 1997 jeep grand cherokee 4x4


Code 51 is ( Right Rear Fuel System Lean ) A lean air/fuel mixture has been indicated by an abnormally rich correction factor. Did you get this code by the flashing check engine light?

Sep 04, 2010 | 1997 Jeep Grand Cherokee

1 Answer

Wiring diagram for jeep 1997


1997 Jeep Grand Cherokee Car Stereo Radio Wiring Diagram.
Car Radio Constant 12V+ Wire: Red/White
Car Radio Switched 12V+ Wire: Red/Gray
Car Radio Ground Wire: Black
Car Radio Illumination Wire: Blue/Red
Car Radio Dimmer Wire: Orange
Car Radio Antenna Trigger Wire: Green/Red
Car Radio Amp Trigger Wire: N/A
Front Speakers Size: 5 1/4′
Front Speakers Location: Doors
Left Front Speaker Wire (+): Green
Left Front Speaker Wire (-): Brown/Red
Right Front Speaker Wire (+): Purple/Yellow
Right Front Speaker Wire (-): Blue
Rear Speakers Size: 5 1/4′
Rear Speakers Location: Rear Doors
Left Rear Speaker Wire (+): Brown/Yellow
Left Rear Speaker Wire (-): Brown/Light Blue
Right Rear Speaker Wire (+): Blue/White
Right Rear Speaker Wire (-): Blue/Pink

pls rate
google_protectAndRun("ads_core.google_render_ad", google_handleError, google_render_ad);

Aug 19, 2010 | 1997 Jeep Grand Cherokee

1 Answer

Dim Dashboard Lights


I think this indicates that you have an exterior light out. Check the tail lights, brake lights and the three bulbs that are mounted at the top of the rear window.

Jan 07, 2010 | 1997 Jeep Grand Cherokee

1 Answer

Location of crankshaft position sensor Jeep grand cherokee 1997


left rear of engine block,on transmission bell housing.best way from top under brake booster use a wrench,

Jun 13, 2009 | 1995 Jeep Grand Cherokee

1 Answer

Open rear window 1997 jeep grand cherokee lorado 4wd


There is a button above the license plate you have to push up on it make sure the door locks are unlocked.

Jun 03, 2009 | 1997 Jeep Grand Cherokee

1 Answer

Where is the wiring harness located on a 1997 Jeep Grand cherokee


On factory installed trailer package. The harness is located on right rear quarter panel back (inside) The trailer connection is just below the bumper. This harness can be purchased at your jeep dealer

May 14, 2009 | 1997 Jeep Grand Cherokee

Not finding what you are looking for?
1997 Jeep Grand Cherokee Logo

57 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

77194 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...