Question about 2006 Chrysler PT Cruiser

Open Question

Trying to take the flywheel off my PT Cruiser, and its something jam in there that looks like a screw thats broke off

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

bunnydawg
  • 5158 Answers

SOURCE: Warning lights PT cruiser

that is likely the check engine light. if you live near an autozone they will scan it for codes (free) and that should tell you why the light came on

Posted on Mar 18, 2009

hotrodshop
  • 106 Answers

SOURCE: looking for relaybox on chrysler pt cruiser(location pictuer)

pt101002.gifunder

Posted on Jun 09, 2009

  • 7353 Answers

SOURCE: looking for engine diagram and maybe a step by

Big problems. you will have bent valves. dont attempt unless you know what you are doing. the head will need to come off. Chrysler has an updated tensioner and cover, replace the water pump. Good Luck.

Posted on Oct 09, 2009

  • 5 Answers

SOURCE: 2001 PT Cruiser: How too remove crankshaft pulley 2001 PT Cruiser...

GET A 3 SPOKE PULLEY EXTRACTOR AND SCREW IN THE BOLT BUT IN THE CRANKSHAFT HOLE PUT A MUCH SMALLER SCEW SO YOU WOUNT MESS THE INSIDE UP

Posted on May 26, 2010

ftw1952
  • 10319 Answers

SOURCE: my 2002 pt cruiser won't shift out of low.

the 2nd & 3rd gear solenoid needs replacing. It is mounted by the trans filter inside the trans pan

Posted on Jul 27, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2003 PT Cruiser dash lights not working


Check the fuses and connections that power up your dash board. Your car manual will tell you the location of the fuses and what is for what.

Apr 01, 2017 | 2003 Chrysler PT Cruiser

1 Answer

Power stearing went out leavin drive way only has 60,000 miles would it be the pump already this is 04 pt cruiser


1st have you looked under the hood may be the belt thats lose or broke maybe low on power steering fluid.if all looks good then it may be a pump problem.

Jul 02, 2011 | 2004 Chrysler PT Cruiser

1 Answer

There is no sensor on the back side of the block above the oil filter on my 05 PT Cruiser. Is there another possible location for the crankshaft position sensor??


around the bellhousing where it can access the flywheel is the most logical ,have you had a good look at the engine and looked at both front pulley and the bellhousing first though before asking?but some vehicles do have them in the block level with the craknshaft ,just have a good look and you will no doubt find it

Feb 19, 2011 | 2005 Chrysler PT Cruiser

2 Answers

TCM in a PT Cruiser 2005


why on earth would you need a new tcm on a 2005!
you need to take your car to a dealer ,if there is a problem with the tcm they can reflash it ,your throwing your money and time away looking for all that other ****

Dec 31, 2009 | 2005 Chrysler PT Cruiser

1 Answer

Looking for engine diagram and maybe a step by step on how to replace a timing belt that broke on a 2001 pt cruiser 2.4L


Big problems. you will have bent valves. dont attempt unless you know what you are doing. the head will need to come off. Chrysler has an updated tensioner and cover, replace the water pump. Good Luck.

Oct 09, 2009 | 2001 Chrysler PT Cruiser

1 Answer

Headlight adjustment


If you look at the front of the headlight, there are actually a couple of screws around the edge. These are your adjustment screws.

Mar 23, 2009 | 2004 Chrysler PT Cruiser

2 Answers

2003 pt cruiser sensors


check the battery and make sure it has a fully charge,also check to make sure the start motor pinion is not jammed in the flywheel, and check the coil pack to make sure have spark.also check the crank sensor

Feb 14, 2009 | 2003 Chrysler PT Cruiser

2 Answers

PT CRUISER


look for the edges around the radio get a thin putty knife seperate the panel from the rest it should just pop out/ as you put the putty knife you will know where the push in retainers are again just pull out/ Please rate my response Thank you very much

Dec 30, 2008 | 2006 Chrysler PT Cruiser

2 Answers

2004 PT cruiser anti-lock brake question


Did you replace the rotors... if the pedal is pulsing that's usually an indication of a warped router

Dec 20, 2008 | 2002 Chrysler PT Cruiser

Not finding what you are looking for?
2006 Chrysler PT Cruiser Logo

Related Topics:

63 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

75005 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7710 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...