Question about BMW X5 Series

1 Answer

How to remove door panel for 05 BMW x5 - X5 Series BMW Cars & Trucks

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 11,896 Answers

Remove all the screws from the panel. Some may be hidden under tabs than can be pried off. Make sure all screws are removed, then gently pry off the panel with a flat-tipped screwdriver. Once the panel is completely loose, lift it up and off.

Posted on Sep 16, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Head bolt torque spec 05 bmw x5 4.4l


  1. Cylinder Head - AutoZone

    www.autozone.com/.../BMW-X5...05/.../Cylinder-Head/_/P-09...

    AutoZoneBMW X5 2000-05 .... Cylinder head bolt tightening sequence-4.4L & 4.6L engines. To install: ... Torque the bolts in thesequence illustrated in 3 steps as follows:.

Oct 17, 2014 | Cars & Trucks

1 Answer

Bmw x5 door handle


remove the door trim and check for connecting rods fallen out of lock assembly.

Apr 26, 2013 | Cars & Trucks

1 Answer

Hi, The drivers side exterior door handle is not working on our BMW X5, the handle appears to be loose and slightly sitting out further than it should be. Can anyone tell me what is the best proceedure to...


stop by your local auto parts store and ask for a trim removal tool. they will hook you up with the right stuff. Start by removing all the screws you see in the door panel, such as those holding the arm rest in place. taking the trim tool, feel around the outer edge of the door panel for the clips that hold it in place. when you find one, put the tool around it and pry outward until the clip comes out of the door. do this until you have the panel free.

Once the panel is off, you will be looking for a loose rod sitting inside the door that will need to be reconnected to the handle.

Good luck.

Aug 28, 2011 | 2005 BMW X5

1 Answer

Remove door trim on a x5


Look on you tube the is a good vid on how to do this i used it to replace a door handle carrier

May 24, 2010 | 2001 BMW 5 Series

1 Answer

How can i remove door handle of bmw X-3


If you have the door panel off already. you have to look at the back of the door latch mechanism. you will see where the wire for the door handle hooks to the door. If you are starting you have to be very careful in removing the screws for the door panel look for the hidden screws under caps with cutout.there should be a toric screw where the door handle is and another one close to where the mirror mounts. again look for caps

Apr 26, 2010 | 2005 BMW X5

1 Answer

My x5 bmw driver door willnot open from outside


It sounds like the handle may be broken, or the linkage may be broken or disconnected

On the inside trim, you can remove screws (these screws may be covered by filler pieces or may be visible, or they may require you pry a plastic piece off that covers the screws) that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Pull back the weather seal and then you can gain access to the exterior handle

Nov 17, 2009 | 2005 BMW X5

1 Answer

My passenger side window is off track in my 2002 x5 BMW. How do I take the door apart and fix it?


the door pannel has to be removed..be careful as the panels on the bmw are kinda tricky hidden screws ect.

Aug 26, 2009 | 2002 BMW 5 Series

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

219 people viewed this question

Ask a Question

Usually answered in minutes!

Top BMW Experts

Frankie B

Level 2 Expert

65 Answers

Fred Sops

Level 2 Expert

272 Answers

Doberman

Level 2 Expert

254 Answers

Are you a BMW Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...