Question about Dodge Ram Pickup 3500

2 Answers

Engine Diagram showing check valve in rear of engine

Posted by on

  • wjwbw65 Sep 16, 2010

    Yes it is what i was told it may be my problem. I have changed all filters but when I take off it runs good but then suddenly loses power all together. I had it in the shop but they could not find the problem.and they are a dealership

×

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 11,896 Answers

Go to autozone . com. Register for a free account. Then confirm the account, login. Choose year make model and engine size of your vehicle. Then choose "view repair manual"

Posted on Sep 16, 2010

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 2,299 Answers

Are you looking for the fuel check valve? I have looked all over the internet for different diagrams for helping people on fixya and I have never had any luck finding free ones or even clear ones. So I always suggest going to your local library. They will have manuals for about every vehicle on the road. My library has them online also. But if you are looking for the fuel check valve then it is round and will be on the top drivers side of the engine that your fuel lines go to.

Posted on Sep 16, 2010

  • 1 more comment 
  • Rodney Clark
    Rodney Clark Sep 16, 2010

    It wants me to answer this question again. I am not too sure what is going on. But I don't know what check valve you are wanting a diagram of.

  • Rodney Clark
    Rodney Clark Sep 16, 2010

    It is showing me now that you had commented. It is the fuel pressure regulator. I can tell you where it is at real easy. It is down on the intake manifold. It is round about the size of a chewing tobacco can. It will have a fuel line going in and coming out of it.

  • Rodney Clark
    Rodney Clark Sep 16, 2010

    It could also be the fuel pump. The pump doesn't have to pump near as much fuel at an idle as it does when you get the rpm's up. So I am sure that it is one of the two.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the location of starter and the fly wheel


didnt specify vehicle---generic answer flywheel is located bolted to rear of engine and is sandwiched between the rear of engine and transmission the starter is bolted usually towards bottom corner at rear or side of engine
Starter engine starter flywheel diagram Yahoo Video Search Results these links show various starter/flywheel locations

Sep 11, 2016 | Cars & Trucks

1 Answer

Where is the egr valve on a citizen c5


  • First you want to open up the hood of your car
  • Find the engine diagram sticker on the inside of the open hood and identify the mechanism that is labeled "EGR Solenoid" on the sticker.
  • Find the "vacuum line" on the sticker diagram and identify its color. This is the line that runs from the EGR solenoid to the EGR valve.
  • Locate the vacuum line inside the engine compartment of the vehicle toward the front of the driver's side. The vacuum line will be the same color on the vehicle as it is on the diagram.
  • Follow the vacuum line from the front of the vehicle where it connects to the EGR solenoid through the conduit that carries it to the EGR valve at the rear of the engine compartment. The easiest way is to track the uniquely colored vacuum line along the path between its two connection points. The vacuum line connects to the EGR valve, which is the disk-shaped object located at the rear of the engine compartment
    on the driver's side.

May 04, 2016 | Cars & Trucks

1 Answer

Looking for a wiring diagram to fix an open in a wire going to my fuel evap valve at rear of truck. Engine code pointed me in that direction. I checked the valve manally and it is fine.


If you run a wire directly from the battery to the valve and it works, then you will know the valve is ok. That will mean you have a wiring problem or a power supply problem. I would imagine that the valve is operated via the ignition system somehow. You will need to trace the wire all the way to its supply. Sorry but I cant help with a diagram.

Sep 17, 2015 | Cars & Trucks

1 Answer

97 ford exporer timing issue


There are three engines used in a 97 model. The 4.0 single overhead cam V6 engine uses a timing chain in the front and in the rear, one for each cam. The left side is in the front and the right side is in the back. You would have to take the engine out to access the rear chain.
The 4.0 overhead valve engine and the V8 engine only have one chain in the front.

May 19, 2013 | 1993 Ford Explorer Limited

1 Answer

Where are the purge lines to the purge valve diagram


Hello! Here is the diagram you requested...#5 is the Pressure Control Valve (Purge Valve)...
(1)Throttle Body (2)EVAP Solenoid Valve (3)EVAP Vacuum Switch (4)EVAP Canister (5)EVAP Pressure Control Valve (6)Floating Roll-Over Valve (7)Fuel Tank
1_1_2012_1_34_25_am.png
Guru.Saailer

Jan 01, 2012 | 1996 Buick Roadmaster

1 Answer

Looking for diagram that shows egr valve on 97 nissan pickup


On page 6-6, Hanes #72030, you will find the diagram that shows the EGR Valve for models 1981 through 1984.The diagram also is followed by models 1985 through 1997. The valve works exactly the same in the 1997 as it does in the 1984. If you need a diagram online, follow this link;

http://www.nissanpartszone.com/diagrams/large/D21U/nissan-hardbody-pickup-1995-1997-egr-parts-147a001.png

Nov 15, 2010 | 1997 Nissan Pickup

2 Answers

Where is the knock sensor on a 96 corolla?


the knock sensor is located at the center of the engine in the rear, heres a diagram witha list of the sensor locations,it shows the knock sensor, it looks like its in the front of engine but its not its in the rear, good luck.d49f3fd.gif

Feb 23, 2010 | 1996 Toyota Corolla

1 Answer

Timing marks for A80 Diesel 1983 please as I have replaced the timing belt,but dosen't run quite right


YOU NEED A REPAIR MANUAL.BECAUSE IT WILL SHOW YOU A DIAGRAM OF YOUR TIMING MARKS.AND HOW TO ADJUST TIMING BELT TENSION.ANY TIME YOU REPLACE A TIMING BELT ON ANY ENGINE.YOU NEED A TIMING BELT DIAGRAM.IF YOU DONT.YOUR ENGINE PISTONS WILL HIT THE VALVES CAUSE TERRIBLE ENGINE DAMAGE.

Aug 31, 2009 | Audi 80 Cars & Trucks

1 Answer

2003 Ford Ranger 2.3 Diagram


 rough-idling engine can signal a number of positive crankcase ventilation (PCV) valve problems, such as a clogged valve or a plugged hose. But before beginning the functional checks, double check the PCV valve part number to make certain the correct valve is installed. If the correct valve is being used, continue by disconnecting the PCV valve from the valve cover, intake manifold, or hose. Start the engine and let it run at idle. If the PCV valve is not clogged, a hissing is heard as air passes through the valve. Place a finger over the end of the valve to check for vacuum.

0900823d8005156c.gif

With the engine at idle, vacuum should be felt at the PCV valve. 

0900823d8004d001.gif

Jan 19, 2009 | 2003 Ford Ranger Regular Cab

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

24 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8172 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...