Question about 1994 Toyota 4Runner
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
that code is for rpm signal and possible causes are the distributor wire harness from dis. to ecu (engine computer) or ecm itself! do you have rpm tach working on the dash? if so it might have seen the fault for a few seconds and set the code if you don't have rmp tach then you need to diagnois the cuase by testing the signal out of the dis. then down the line! if you have any more question please ask. good luck
Posted on Sep 18, 2009
Its easy, The only tool you need is a plastic lever tool. Or can be done with big head screw driver (but car for the trims for it can get damaged)
Lever both side vents out, then pull on the trim gently outwards. (long piece from glove box to the end of the radio before the instrumental dash panel) Then pull the main inturmental dash out towards you as well. There may by plugs connected to the front panel. Disconnect that and it exposes the digital meter, I think it then takes only 2 x 10m bolts and the dash is out.
Posted on Dec 06, 2009
Tips for a great answer:
Mar 30, 2016 | Toyota Cars & Trucks
Jun 24, 2015 | Cars & Trucks
Jan 13, 2015 | Toyota Cars & Trucks
Mar 06, 2013 | Cars & Trucks
Apr 04, 2012 | Cars & Trucks
Feb 03, 2012 | Cars & Trucks
May 01, 2011 | Toyota 4Runner Cars & Trucks
Feb 23, 2010 | 1997 Toyota 4Runner
128 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: