Question about 2000 Oldsmobile Intrigue

Open Question

My 2000 oldsmobile intrigue check engine light came on and the car statrted jerking alot as soon as the light came on. It is a v6 engine, I checked the fluid levels they were normal the car has 107201 miles on it.

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 90 Answers

SOURCE: 2000 oldsmobile Intrigue V6

This could be a # of problems but try these: Remove gas cap and carefully inspect it and the fuel filler neck for small cracks and/or distortion/dirt. Under the hood there is a small green cap which is the test port for the evap system, remove it and check the schrader valve to be sure its tight ( left hand threads!!!). Check all hoses attached to this for cracks/breaks.Other than this a diagnostic will have to be ran with a smoke machine to pin point leaks or valve/switch/solenoid/canister failure.

Posted on Jan 14, 2009

jeremythious
  • 37 Answers

SOURCE: 1990 ford econoline van trans problem

Check tv cable, from throttle body to trans.

Posted on Feb 08, 2009

  • 1 Answer

SOURCE: 2004 Oldsmobile Bravada Transfer case binding

theres a sensor that disengages the axles so you can turn. this a common problem with these as ive talked to a few gm techs.

Posted on Mar 16, 2009

  • 246 Answers

SOURCE: Oldsmobile Intrigue coolant light on service engine soon on

First try taking both of your battery cables off the battery and then touch the metal part of the cables together for one full minute...this will clear the error codes and return your computer to it's default settings. If all problems persist after doing this, I would suspect that the computer is bad. Let me know how you make out.

Posted on Jul 30, 2009

  • 91 Answers

SOURCE: Changing water pump on a 1999 Oldsmobile Intrigue

Easy - drain coolant, remove pulley, remove drive belt, remove water pump bolts, reverse.
0c9a704.jpg
Check it out at http://99intrigue.shutterfly.com/waterpump

Posted on Apr 06, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How can I reset the service engine soon light on a 2000 Oldsmobile Intrigue


Hi,
The service light is indicating there is a fault code either in the ECM or BCM system. The only way in which this can be switched off is to have these codes checked and cleared in these to control unit with a diagnostic tool.

Mar 21, 2012 | 2000 Oldsmobile Intrigue

1 Answer

Service engine soon light stays on and car jerks when in gear.


Sounds like a miss of some sort. Have you checked the injectors to make sure each one is firing, by listening to each one through a stethoscope (it should click while on.

Have you had a tune up lately (spark plugs, wires, fuel filter, etc.)?

Jul 02, 2010 | 2000 Oldsmobile Intrigue

2 Answers

Warning light on are trac off, anti-lock, brakes, service engine


You need to have the abs system scanned for codes. You likely have a bad wheel speed sensor on one of wheels.

Apr 21, 2010 | 2000 Oldsmobile Intrigue

2 Answers

Service Engine Soon light comes on during a long, high speed drive and code P0101 is set, on 2000 Oldsmobile Intrigue.


P0101 pertains to the Mass Air flow circuit out of range. Check for air leaks at the air inlet hose

Mar 26, 2010 | 2000 Oldsmobile Intrigue

1 Answer

Check engine soon light is on


this light means that a fault has occured in the electronic engine or emission controls of your car, there are over 200 such faults that turn the light on, when the control module turns on the light it sets a fault code in its memory, have this code read to see what system has malfunctuioned.

Dec 08, 2009 | 2000 Oldsmobile Intrigue

1 Answer

2000 intrigue, seems like right front wheel jerks, 3.5, 153k mi


The "jerking" can be normal because that is the wheel that the power is going to..
If the jerking is "too much" it could be out of allingment or could be a warn out bushing or a bad ball joint in the front end.. Jack up the front of the car (be safe) leaving the front wheel hanging free.. **** the wheel left to right.. You should be able to see if anything is loose or not moving properly..

Jul 08, 2009 | 2000 Oldsmobile Intrigue

1 Answer

2000 oldsmobile Intrigue V6


This could be a # of problems but try these: Remove gas cap and carefully inspect it and the fuel filler neck for small cracks and/or distortion/dirt. Under the hood there is a small green cap which is the test port for the evap system, remove it and check the schrader valve to be sure its tight ( left hand threads!!!). Check all hoses attached to this for cracks/breaks.Other than this a diagnostic will have to be ran with a smoke machine to pin point leaks or valve/switch/solenoid/canister failure.

Jan 14, 2009 | 2000 Oldsmobile Intrigue

1 Answer

Service engine soon light


the problem could be that your car is missing ,and causing the light to come on for a miss code.

Oct 20, 2008 | 1999 Oldsmobile Intrigue

Not finding what you are looking for?
2000 Oldsmobile Intrigue Logo

Related Topics:

79 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8152 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...