Question about 2002 Chevrolet Avalanche

1 Answer

Abs light on and traction light off

I have a 2002 Avalanche and abs light is on and making a noise up under the truck.

Posted by on

  • 1 more comment 
  • jnm789 Jun 17, 2008

    I looked under the truck and it is a small pump of some kind making the noise. If I take the fuse out of the abs out of the fusebox the pump stops running, but that kills the abs system entirely as well as the standard brakes.

  • wtjc Jul 15, 2008

    Same problem - removing fuse kills abs but standard brakes still working.


  • Anonymous Dec 28, 2008

    The ABS pump keeps running, even with engine off. Had to disconnect it at the pump. What next?

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 183 Answers

Dear Customer,

if you getting some noise like small twittering than its genuine at high speed braking,

or if you get more noise like hammering once a time in braking tahn you have to check your brake couplers that having some crack or some unbalancing ,

THNX

Posted on May 17, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Traction control problem


Grinding noises when making turns in front wheel drive cars usually is constant velocity joints.

Mar 04, 2016 | Cars & Trucks

1 Answer

My Lincoln LS V8 2002 has the ABS and Traction Control light on?


I see is 2002,hub bearing is good but ABS sensor is not good.You have to change the hub bearing.Did you hear any noise from wheels,that sound off bad bearings.

Aug 05, 2014 | 2002 Lincoln LS

2 Answers

2002 Buick Rendezvous Service traction system and ABS lights, grinding when turning ans braking


The ABS and Service Traction system may be due to bad sensors or signal reaching the ABS/Traction Control computer. The grinding may be due to uneven or unsmooth rotors, and/or worn out pads or shoes.

I would recommend that the entire braking system be diagnosed at your local dealer or brake service facility.

Oct 26, 2010 | 2002 Buick Rendezvous

1 Answer

Cause abs light


u got a short in the sencer its in the wiering

Jul 01, 2009 | 2002 Chevrolet Avalanche

3 Answers

Abs Is engaging irratically on 2002 avalanche


Did you bleed the system after doing the brakes? and since you din't say abs light I assume you mean the brakes are acting erratically. If you bleed the breaks first after that try it and if it still does it make sure you have the correct rotors and pads.

Jun 16, 2009 | 2002 Chevrolet Avalanche

2 Answers

2002 Suburban 1500 - ABS Light On


No doubt the control module is out, and it continue to operate when the ignition key is off due to a circuit fault. You can disable it easily by pulling the 60 amp fuse in the under hood fuse box (it is listed on the panel as ABS). Note that this disables the ABS braking feature and traction control, so be very careful when driving. The part can be purchased on the GM global parts site, about $600-$700 for the module. This will be the second time this has gone out for me and GM is not sympathetic, rather "pathetic", for a part to fail so often.

Apr 22, 2009 | 2002 Chevrolet Suburban 2500

3 Answers

Where is the abs control module located on a 02 chevy avalanche ?


THE EBCM IS BAD this is the electronic control module that is on abs pump. you can replace seperate I think it is around 500 for part

Dec 30, 2008 | 2002 Chevrolet Avalanche

2 Answers

Service traction system message


Probably a bad ABS sensor is shutting down the traction control system.First you have to take it in to a reliable tech.He would scan the computer & check your ABS sensors.Im fairly certain one of thoe sensors are acting up.

Nov 24, 2008 | 2002 Chevrolet Impala

2 Answers

Traction control light and abs light


ok your problem is that your brakes are under force you shold get new brake pads ok

Jul 14, 2008 | 2002 Audi A4

Not finding what you are looking for?
2002 Chevrolet Avalanche Logo

Related Topics:

282 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

64286 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...