Question about 2000 Mazda MPV

2 Answers

2000 Mazda MPV

Serpentine belt diagram is needed. Where can I find a free copy online?

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

I NEED THE DIAGRAM FOR SERPENTINE BETL FOR MAZDA 2000 MPV

Posted on Jan 20, 2009

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 6 Answers

Actually, replacing this belt should be easy and doesn't need a diagram; but in most cases, when I buy the parts from my Mazda dealer, I ask for a diagram and they are happy to print one out for me. This is my experience with two Mazda dealers I go to to buy parts. In some cases, they voluntarily provide me with the diagram because they want me to purchase the right parts and put them in right. By the way, I can't speak favorably enough of Mazda. When I bought my 2000 Mazda MPV with a 5 year, 70,000 mile factory warranty; I put on 74,000 miles the first year (between MA and PA on weekends), the engine died a little over 74,000 miles. Even though, the engine was out of warranty, Mazda replaced the engine for free, I just have to pay for the labor to put it in. Nine years later, it is still running with over 280K on the odometer. Now, that's service and reliability.

Posted on May 04, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Free engine diagrams


Do a google images search for 2000 mazda mpv engine diagram and you will see lots of options. You could fine tune that to searching for 2000 mazda mpv cooling system diagram if you prefer. It will come up with a lot of small pictures if you click on the picture it will enlarge. If you then click (to the right of the picture) on the name of the site it is from or the link Visit Page it will take you to the page of the website where the diagram is from. This allows you to get more detailed info about which ever system you currently need to look up (for future use also).

Mar 26, 2014 | 2000 Mazda MPV

1 Answer

2003 mazda mpv international timing chain marks need diagram


Here's a link to your timing belt,join the site,it's free,then you can use their repair guides like me.

Oct 21, 2013 | 2003 Mazda MPV

1 Answer

Replace alernator and serpentine belt


Below is the master help link provided to go through belt routing diagram:---Timing belt, drive belt, serpentine belt, accessory belt, fan belt, engine belt routing diagrams for all types of car models?
Click the link below: ----

http://carbeltrouting.blogspot.in/2012/02/timing-beltdrive-beltserpentine.html
----------This will help. Thanks.

Jan 23, 2012 | 2001 Mazda MPV

1 Answer

Belt replacement diagram 2000 mazda mpv


REMOVAL & INSTALLATION Because serpentine belts use a spring loaded tensioner for adjustment, belt replacement tends to be somewhat easier than it used to be on engines where accessories were pivoted and bolted in place for tension adjustment. Basically, all belt replacement involves is to pivot the tensioner to loosen the belt, then slide the belt off of the pulleys. The two most important points are to pay CLOSE attention to the proper belt routing (since serpentine belts tend to be "snaked'' all different ways through the pulleys) and to make sure the V-ribs are properly seated in all the pulleys. Although belt routing diagrams have been included in this section, the first places you should check for proper belt routing are the labels in your engine compartment. These should include a belt routing diagram which may reflect changes made during a production run.
  1. Disconnect the negative battery cable for safety. This will help assure that no one mistakenly cranks the engine over with your hands between the pulleys, and that the cooling fan cannot activate while servicing the belt(s). NOTE: Take a good look at the installed belt and make a note of the routing. Before removing the belt, make sure the routing matches that of the belt routing label or one of the diagrams in this book. If for some reason a diagram does not match (you may not have the original engine or it may have been modified), carefully note the changes on a piece of paper.
  2. For tensioners equipped with a 1⁄2 in. (13mm) square hole, insert the drive end of a large breaker bar into the hole. Use the breaker bar to pivot the tensioner away from the drive belt. For tensioners not equipped with this hole, use the proper-sized socket and breaker bar (or a large handled wrench) on the tensioner idler pulley center bolt to pivot the tensioner away from the belt. This will loosen the belt sufficiently that it can be pulled off of one or more of the pulleys. It is usually easiest to carefully pull the belt out from underneath the tensioner pulley itself.
  3. Once the belt is off one of the pulleys, gently pivot the tensioner back into position. DO NOT allow the tensioner to snap back, as this could damage the tensioner's internal parts.
  4. Now finish removing the belt from the other pulleys and remove it from the engine. To install:
  5. While referring to the proper routing diagram (which you identified earlier), begin to route the belt over the pulleys, leaving whichever pulley you first released it from for last.
  6. Once the belt is mostly in place, carefully pivot the tensioner and position the belt over the final pulley. As you begin to allow the tensioner back into contact with the belt, run your hand around the pulleys and make sure the belt is properly seated in the ribs. If not, release the tension and seat the belt.
  7. Once the belt is installed, take another look at all the pulleys to double check your installation.
  8. Connect the negative battery cable, then start and run the engine to check belt operation.
  9. Once the engine has reached normal operating temperature, turn the ignition OFF and check that the belt tensioner arrow is within the proper adjustment range. Fig. 1: Often the underhood label will display the serpentine drive belt routing 88231p43.gif
    Fig. 2: Relieve the belt tension by pivoting the automatic tensioner away from the belt, then remove the belt 88231p44.gif
    Fig. 3: Verifying serpentine belt alignment in the pulley 79244g60.gif
    Fig. 4: Fig. 1 Accessory V-belt routing (alternator) — Mazda MPV 3.0L engine 79244g67.gif
    Fig. 5: Fig. 2 Accessory V-belt routing (power steering) — Mazda MPV 3.0L engine 79244g66.gif
    Fig. 6: Fig. 3 Accessory V-belt routing (A/C compressor) — Mazda MPV 3.0L engine 79244g65.gif
prev.gif next.gif

Jul 08, 2010 | 2000 Mazda MPV

1 Answer

How to change a timeing belt


Click on the following free direct Link. It has the Timing: Belt and Mark Diagrams for your 1995 Mazda MPV. Plus additional Instructional and Directional Diagrams.

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!

http://www.2carpros.com/car_repair_information/year/1995/make/mazda/model/mpv/1995_mazda_mpv_timing_belt_diagram_marks.htm

Mar 12, 2010 | 1995 Mazda MPV

1 Answer

Serpentine belt diagram Mazda MPV


My sincere apologies for the delayed response.
I am personally going back to answer your unanswered questions.

I do not know if you still need this information, but I am going ahead and answering it anyway. You may want to Print the Diagrams for future use.

CLICK
on the following LINK. It has the Belt Diagrams you will need.
If you would: Before Clicking: Let me know if this helped you, or if you have any additional information or questions. Feel Free to contact me at FixYa.com!
Again my apologies...
http://www.2carpros.com/car_repair_information/year/2001/make/mazda/model/mpv/2001_mazda_mpv_drive_belt_routing_diagram.htm

Nov 01, 2009 | 2001 Mazda MPV

1 Answer

Do you have a diagram on setting a timing belt for a 1997 mazda MPV?


My sincere apologies for the delayed response.
I am personally going back to answer your unanswered questions.
I have only been a free contributor to this site for the past 4-months.


I do not know if you still need this information, but I am going ahead and answering it anyway. You may want to Print the Diagrams for future use.

CLICK
on the following LINK. It has the Belt Diagrams you will need.

If you would: Before Clicking: Let me know if this helped you, or if you have any additional information or questions. Feel Free to contact me at FixYa.com!

Again my apologies...
http://www.2carpros.com/car_repair_information/year/1997/make/mazda/model/mpv/1997_mazda_mpv_timing_belt_diagram_marks.htm

Jun 25, 2009 | 1997 Mazda MPV

2 Answers

Replacing neutral safety switch on 2000 mazda mpv


ALLData.com probably has the best info for your MPV. I use it for my 2000 MPV and it hasn't failed me yet. Mazda wants $250 for a shop manual and Haynes hasn't written one as of yet. My MPV right now won't come out of 2nd gear because of (I'm hoping) a bad PRNDL Range Select Switch.

Mar 19, 2009 | 2000 Mazda MPV

Not finding what you are looking for?
2000 Mazda MPV Logo

1,211 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

63242 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21981 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...