Question about 1997 Oldsmobile Cutlass Supreme

Open Question

HEADLIGHT RELAY LOCATION ON 1997 CUTLASS SUPREME 4DR

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 321 Answers

SOURCE: 1995 cutlass supreme transmission

It physically will fit and bolt up,but there are many different ratio,and drive and driven sprocket tooth counts,different final drive ratios,all monitored by the computer with electronic speed sensors.If the trans from the 95 has a different ratio than the 93,the computer will set gear ratio error codes,and possibly put the trans in a failsafe mode,stuck in 2nd or 3rd gear.On the transmission case,down by where the passenger side axle would go in,is a thin metallic tag,maybe 2"x 3",and it has bar codes,and also a series of numbers and letters.The numbers and letters,large cap,are the final drive gear ratio code.They should match on the two transmissions in question.

Posted on Jul 31, 2008

  • 4 Answers

SOURCE: 1997 oldsmobile cutlass supreme knocking noise & problems acceler

That could be only two things one a bad pistion or a bad rod. I would take the engine apart and find one or both maybe broken or in bad repair fixing. I would not drive it far it will throw the pistion or rod right through the engine costing ya more money or a new car.

Posted on Jan 09, 2009

Thunder55
  • 318 Answers

SOURCE: I need the firing order

1-6-5-4-3-2

Posted on Jan 19, 2009

c17hydro
  • 2984 Answers

SOURCE: where is the location of the battery in a 94'

Pictures coming next!

CAUTION Always make sure that the ignition is OFF when disconnecting or connecting the battery cables. Failure to do so may cause damage to the computer control module or other electronic components.

  1. Make sure the ignition is OFF . Remove the air cleaner assembly if necessary, and disconnect the negative battery cable, then the positive cable.
  2. Unfasten the retaining bolts, then remove the cross brace.
  3. If equipped with Anti-Lock Brakes (ABS), remove the relay center and bracket, then position aside.
  4. If necessary, detach the electrical connector and hose from the windshield washer pump, then unfasten the reservoir retaining nut and remove the reservoir.
  5. Remove the air cleaner bracket upper attachment bolt.
  6. Unfasten the battery heat shield, hold-down bolt, and retainer.
  7. Remove the battery from the battery tray.
To install:
  1. Place the heat shield on the battery, then position the battery in the vehicle.
  2. Install the retainer, air cleaner bracket and hold-down bolt. Tighten the hold-down bolt to 13 ft. lbs. (18 Nm).
  3. Install the air cleaner bracket upper attachment bolt. Tighten the bolt to 35 inch lbs. (4 Nm).
  4. Position the windshield washer reservoir and secure with the retainers. Attach the hose and electrical connector to the windshield washer pump.
  5. If equipped with ABS, install the relay center bracket and relay center.
  6. Position the cross brace, then secure with the retaining bolts. Tighten the front bolt to 18 ft. lbs. (25 Nm) and the rear bolt to 35 ft. lbs. (47 Nm).
  7. Connect the positive battery cable, then the negative battery cable. Tighten the cable bolts to 11 ft. lbs. (15 Nm).
  8. If removed, install the air cleaner assembly.

Posted on Oct 20, 2009

  • 1024 Answers

SOURCE: location of fuel filter on 93 oldsmobile cutlass

under the car in rear

9460f94.gif

Posted on Mar 29, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I remove glove box on 1997 olds cutlass supreme


check the fusebox under your hood for the horn relay,should be a black box close to your battery that has fuses in it

Jan 31, 2013 | 1997 Oldsmobile Cutlass Supreme

1 Answer

Where under the hood is the fuel pump relay on a 1993 oles cutless


If it is a cutlass supreme, it should be in a relay box on the passenger side near the headlight, or on the driver side near the strut tower.
The box lids should be marked and the location should also be in your owners manual.

Dec 20, 2012 | Cars & Trucks

1 Answer

1997 Oldsmobile Cutlass Supreme SL Fuse Box diagram


On this website, you find fuse box diagram and description for Oldsmobile Cutlass Supreme (1997)

Oldsmobile Cutlass Supreme 1997 fuse box diagram Auto Genius

Mar 10, 2012 | Cars & Trucks

1 Answer

Right headlight is out on my 1995 cutlass


IF THE HEAD LAMP BULB IS NOT BLOWN THE HEADLAMP FUSE OR RELAY MAY BE BAD.

Nov 27, 2010 | 1995 Oldsmobile Cutlass Supreme

1 Answer

Where is the fuel pump relay located


1994 Oldsmobile Cutlass Supreme 3.1L SFI OHV 6cyl the Relay - Fuel Pump is located under hood, passenger side, front engine area, rear of headlight housing, mounted in relay block on upper fenderwell.

Remember rated this. Good luck.

Aug 10, 2010 | 1994 Oldsmobile Cutlass Supreme

1 Answer

Would my 97 olds cutlass supreme 4dr car be a 4 or 6 cyl? I'm a woman owner who doesn't know.


More than Likely it is a V6 either the 3300 or 3800

if you look at the top of the engine you will see the numbers
I am talking about

Aug 04, 2010 | 1997 Oldsmobile Cutlass Supreme

1 Answer

1997 Cutlass Supreme turn signals arae not working. I have checked the fuses and all is good. The hazards work...please help


the turn signal mulifunction switch failed. You will need to replace it. This is a common failure. Also you have a blinker relay somewhere. Get someone to replace it. I dont know where its located on your model. Do this first.

May 15, 2010 | 1997 Oldsmobile Cutlass Supreme

1 Answer

Need location for thermostat for 1997 olds cutlass supreme


follow the upper radiator hose to engine, the stat is located at the end of that hose under the large nipple the hose is attached to.

Jul 08, 2009 | 1997 Oldsmobile Cutlass Supreme

Not finding what you are looking for?
1997 Oldsmobile Cutlass Supreme Logo

Related Topics:

60 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7768 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...