Question about 2001 Volkswagen Beetle

1 Answer

Code say ox sensor bank 1 that the motor is running lean i replaced ox sensor , light was out for 10 miles than light came back on

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 228 Answers

Check plugs see what they look like a lean mixture will look light in color ,compare to the other bank. They need to look all similar,detect a lean fireing cylinder or cylinders on one bank, Could be fuel delivery,from an injector ! Or leaking intake manifold gaskets or bad hoses,leaking vacummn.

Posted on Sep 16, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Codes P2270& P2272 after oil change check engine light on drove under 100 miles both O2 sensors bad .Could shop have caused this somehow??? Maybe banging them or something ?


make sure they are plugged in tight Definition of Diagnostic Trouble Code P2270 Category: Powertrain Definition: O2 Sensor Signal Biased/Stuck Lean Bank 1 Sensor 2Note: This definition of P2270 is applied to all manufacturers

P2270 - O2 Sensor Signal Biased/Stuck Lean Bank 1 Sensor 2 Comments ' Add Yours
Possible causes
- Faulty Rear Heated Oxygen Sensor Bank 1
- Rear Heated Oxygen Sensor Bank 1 harness is open or shorted
- Rear Heated Oxygen Sensor Bank 1 circuit poor electrical connection
- Exhaust gas leaks Help with this
When is the code detected?
The Powertrain Control Module (PCM) detected the HO2S12 sensor has reported a lean condition for an extended period during an intrusive test
Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
- High Fuel Consumption
- Excessive Smoke from Exhaust
P2270 Description
The Powertrain Control Module (PCM) supplies a voltage of about 450 mV between the HO2S high and low signal circuits. The oxygen sensor varies the voltage over a range from about 1,000 mV when the exhaust is rich, down through about 10 mV when the exhaust is lean.
The PCM monitors and stores the heated oxygen sensor (HO2S) voltage information. The PCMevaluates the HO2S voltage samples in order to determine the amount of time the HO2S voltage was out of range. The PCM compares the stored HO2S voltage samples taken within each sample period and determines if majority of the samples are out of the operating range.

Definition of Diagnostic Trouble Code P2272 Category: Powertrain Definition: O2 Sensor Signal Biased/Stuck Lean Bank 2 Sensor 2Note: This definition of P2272 is applied to all manufacturers

P2272 - O2 Sensor Signal Biased/Stuck Lean Bank 2 Sensor 2
' Add Comment
Possible causes
- Faulty Rear Heated Oxygen Sensor Bank 2
- Rear Heated Oxygen Sensor Bank 2 harness is open or shorted
- Rear Heated Oxygen Sensor Bank 2 circuit poor electrical connection
- Exhaust gas leaks
What does this mean?
When is the code detected?
The Powertrain Control Module (PCM) detected the HO2S22 sensor has reported a lean condition for an extended period during an intrusive test
Possible symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
- High Fuel Consumption
- Excessive Smoke from Exhaust
P2272 Description
The Powertrain Control Module (PCM) supplies a voltage of about 450 mV between the HO2S high and low signal circuits. The oxygen sensor varies the voltage over a range from about 1,000 mV when the exhaust is rich, down through about 10 mV when the exhaust is lean.
The PCM monitors and stores the heated oxygen sensor (HO2S) voltage information. The PCMevaluates the HO2S voltage samples in order to determine the amount of time the HO2S voltage was out of range. The PCM compares the stored HO2S voltage samples taken within each sample period and determines if majority of the samples are out of the operating range.
P2272 Information for specific makes
P2272 BMW
P2272 DODGE
P2272 FORD

Jul 30, 2015 | Cars & Trucks

2 Answers

Error codes po 134 po 153 po 154 po 155 po 171 po 174


PO 134 = 02 SENSOR CIRCUIT NO ACTIVITY DETECTED (BANK 1 SENSOR1)
PO 153 =02 SENSOR CIRCUIT SLOW RESPONSE (BANK 2 SENSOR 1)
PO 154 =02 SENSOR CIRCUIT NO ACTIVITY DETECTED (BANK 2 SENSOR 1)
PO 155= 02 SENSOR HEATER CIRCUIT MALFUNCTION (BANK 2 SENSOR 1)
PO 171= SYSTEM TOO LEAN (BANK 1)
PO 174= SYSTEM TOO LEAN (BANK 2)
I WOULD SAY YOU HAVE FAULTY OXYGEN SENSORS CAUSING THE ENGINE TO RUN TOO LEAN REPLACE THEM AND YOU SHOULD BE BACK IN BUISNESS

Feb 23, 2011 | 2004 Suzuki Grand Vitara

1 Answer

I have a 2000 Hyundai Sonata that runs rough when you start it up. I hooked a code reader to it and it said that system was lean on bank 1 and multi misfire and not reading 02 sensor on bank one. I have...


time to get the engine properly scanned, real time not code scanner, then you will have the readings from sensore and actuators, diagnose from there

Dec 14, 2010 | Hyundai Motor 2004 Sonata

1 Answer

Trouble codes p0171, p1131, and p0136


p0171 = system too lean bank one. p0136 is a bad Ox sensor bank 1 sensor 2. You have at least one bad Ox sensor. 4df0849.jpeg

Oct 09, 2010 | 2001 Ford Econoline

1 Answer

I have replaced all 4 ox senors before I replaced intake man. gaskets. It is a 97 chevy W/Truck with a V6 auto, auto trans. 2WD. now service engine soon light came on after about 200 miles, it will go off...


First did you clear all the fault codes after your repairs? The reason I ask is po131 is bank one oxygen sensor, po174 is engine lean from faulty oxygen sensor, and po171 is engine lean condition, possibly from vacuum leak (intake manifold gasket?), pcv valve,etc. To check for vacuum leak at intake, start engine and gently spray starting fluid around intake gasket. If rpm raise slightly while doing this then there is a vacuum leak(stay away from air filter intake and housing though), and the gasket will need to be replaced again.

Jan 09, 2010 | 1997 Chevrolet C1500

1 Answer

My check engine light is on its saying system too lean code Po174


How many miles are on the car? It could be one of three things.
1. Check vaccum lines running to the valve covers. The rubber nipple that connects to the valve cover sometimes gets a hole.
2. Could be 02 sensor depending if its lean on bank 1 or bank 2.
3. Also check DPFE hose's. Located on back of motor running from EGR valve exhuast tube.

Oct 28, 2009 | 2000 Ford Taurus

3 Answers

Getting a lean burn error code on banks 1 & 2. reset it and drove 250 miles before it came back on. Reset it again but the code came back within 10 miles. Checked for vacuum leaks, none found, replaced...


Check for vacuum leaks.

Air tube between air filter and intake manifold.

If the motor has over 80,000 miles then the intake manifold gasket can **** in air and leaning out the air/fuel mixture.

Give each air / vacuum relayed hose a 1/8-1/4 turn.

Get a steam cleaning on the motor and check for any sign of leak around the sensors.


Oct 10, 2009 | 2001 Cadillac DeVille

1 Answer

CHECK ENGINE LIGHT ON , WITH CODE SYSTEM TOO LEAN


Possible failed bank 1 sensor 1 oxygen sensor..

Mar 29, 2009 | 1999 Chevrolet Silverado 1500

2 Answers

Check Engine Light - O2 Sensor - bank 1 running lean


you should have three oxygen sensors on your car, one for each bank of three cylinders; should be towards the Y pipe on each exhaust manifold. Additionally you should have one on the exhaust pipe before the cadilitic converter.

Nov 20, 2008 | 2002 Chevrolet Monte Carlo

Not finding what you are looking for?
2001 Volkswagen Beetle Logo

Related Topics:

244 people viewed this question

Ask a Question

Usually answered in minutes!

Top Volkswagen Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

yadayada
yadayada

Level 3 Expert

76846 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8575 Answers

Are you a Volkswagen Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...