Question about 2002 Dodge Neon

Open Question

P0871,p0846 p0700 trans fluid clean no gears stoped when light came on with codes

Posted by on

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

rickyrt441
  • 4399 Answers

SOURCE: Transmission not shifting right. Winds up then

Thanks for choosing FixYa and welcome to the site. The codes are probably thrown for the transmission. You need to find out exactly where it is leaking. I know you have did this already, but you should try it with the car running. Run it a few miles and park it. Keep it running and check it out. Until you know the exact location, there isn't much we can do. Make sure you check the entire transmission housing for cracks or damage. Let me know when you find the leak. Since it is leaking, make sure you keep fluid in it. If you have drove with little or no fluid, you may have transmission issues. Let me know if it has been hard switching gears. Is it automatic or standard?

Posted on Mar 28, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 2002 chrysler sebring shooting codes po700 po455 po442 po700 po841 po846 po732 gear2 inc ratio po731 inc ratio po733 pulled out solenoid and had a metal shaving on the magnetic end helpplease


P0700 Transmission Control System Malfunction P0445 Evaporative Emission Control System Purge Control Valve Circuit Shorted P0442 Evaporative Emission Control System leak Detected (small leak) P0841 Transmission Fluid Pressure Sensor/Switch A Circuit Range/Performance P0846 Transmission Fluid Pressure Sensor/Switch B Circuit Range/Performance P0732 Gear 2 Incorrect Ratio
Full list of the OBD2 DTC from P0700 to P0999

May 04, 2016 | Chrysler Cars & Trucks

1 Answer

Loss of power, transmission issues


code p0700 refers to transmission control system/MIL --malfunction===causes --wiring ---TCM (1)
code po740 refers to torque converter clutch (TCC) solenoid--circuit malfunction===causes--wiring--TCC solenoid--ECM/TCM (transmission control module) (again)
code p0871 refers to transmission fluid pressure (TFP) sensor C -range/ performance problem==causes---wiring--poor connection--TFP sensor--ECM /TCM (yet again)
code p0734 refers to gear 3 ratio (po374 is gear ratio 4) incorrect ratio===causes --wiring--TR sensor/switch--shift solenoids--transmission mechanical fault (causes are the same for po733&734)
code po846 refers to transmission fluid pressure (TFP) sensor B-range/ performance problem===causes ---wiring--poor connection--TFP sensor--ECM/TCM (again). Give the clutch a miss as you still have 1st gear and if the clutch is not working you will not be going any where. Have a pressure test done on the transmission to check for internal mechanical failures (pump ). The rest are sensors are wiring connections , sensor and TCM. My bet is the TCM unit. Have it checked out. What ever you do treat any suggestion of a new transmission with a grain of salt until you are shown proof positive that you need one.

Nov 15, 2013 | 2003 Dodge Neon

2 Answers

Engine code p0700, p0871 and p0760


The P0700 means Transmission Control System (MIL Request)
The P0760 means Shift Solenoid "C"
The P0871 means Transmission Fluid Pressure Sensor/Switch "C" Circuit Range/Performance.
_________________
spare transponder key

Oct 05, 2012 | 2003 Dodge Intrepid

1 Answer

I have a 2004 chrysler concorde. i got three code readings does anyone know what they are? they are p0700, p0871 and p0306


P0306 indicates misfire #6 cylinder detected
P0700 indicates a problem with the transmission or controller
P0871 indicates a problem with the transmission overdrive

Dec 06, 2011 | Dodge Cars & Trucks

3 Answers

What does these codes mean P1781, P0731, P1784 AND P0700 AND HOW DO I FIX THEM.


p1781 is manufacturer control transmission, p0731 is gear 1 ratio incorrect, p1784 is manufacturer control transmission, p0700 is trans, control system malfunction. all of these codes refer to tranny.This code normally points to a faulty transmission control module, but this is an expensive part and you should have an experienced Dodge technician diagnose the problem first. or a transmission specialist. the other codes are probably associated with the p0700 code. have a good day !

Apr 27, 2011 | 2001 Dodge Grand Caravan

1 Answer

Transmission not shifting right. Winds up then shifts. Pulled over. Trans fluid everywhere. Put more fluid in to see where its leaking. No leaks. Drove it again. Smoking. Trans fluid all over the place...


Thanks for choosing FixYa and welcome to the site. The codes are probably thrown for the transmission. You need to find out exactly where it is leaking. I know you have did this already, but you should try it with the car running. Run it a few miles and park it. Keep it running and check it out. Until you know the exact location, there isn't much we can do. Make sure you check the entire transmission housing for cracks or damage. Let me know when you find the leak. Since it is leaking, make sure you keep fluid in it. If you have drove with little or no fluid, you may have transmission issues. Let me know if it has been hard switching gears. Is it automatic or standard?

Mar 28, 2011 | 2004 Dodge Neon

3 Answers

I have a 2004 dodge neon sxt and the codes im getting are, p0175, p0700 and p0731


Is it the 2.0? I have some codes for the 2.0. I had one! Fun to drive but always in the shop. Here is what i found...
p0175 - System too rich (bank 2)
p0700 - Transmission control system mil request
p0731 - First gear incorrect ratio

I hope this stuff helps!

Mar 22, 2010 | 2004 Dodge Neon

2 Answers

2003 Dodge Caravan Trouble codes p0731,p0841,p0846,p0700 Help Please.


p0731 transmission shift problems
p0841 solinoid problems in the transmission
p0846 fluid level
p0700 solinoid stuck or sticking hard shifting
there is a solinoid in the transmission that shifts the trans and downshifts when stopping this is a problem you generally don't want to do your self

Mar 03, 2010 | 2003 Dodge Caravan

1 Answer

2002 Dodge Caravan, Tranny would shift, DTC P0700, P0725


replace the input speed sensor to transmission and the wiring pigtail all are available at your chrysler dealer take your vehicle registration in to the parts counter so they have your vin # to get the right part and it is the front of trans by fluid linres to radiator.

Mar 08, 2009 | 2002 Dodge Caravan

Not finding what you are looking for?
2002 Dodge Neon Logo

Related Topics:

263 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7754 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...