Where would i find a serpentine belt for my 1996 grand caravan?

Tensioner badly adjusted or pulleys are misaligned.

Take it back to the shop and ask them to fix the tension under the repair warranty.

There should be enough tension that the belt can't jump the pulleys. There is a small chance is is misrouted.

https://www.2carpros.com/diagrams/dodge/grand-caravan/1994

https://www.google.com/search?q=94+dodge+grand+caravan+serpentine+belt+diagram

..

The timing belt is inside the housing (plastic) and if it was off then the engine would not have been running. The belt you saw is the serpentine belt and drives the accessories such as alternator --fan---power steering---water pump---ac compressor. With it missing the engine would have no water pump or fan and would have been getting quite hot. Get a new belt and if you have a owners hand book the lay out will be in a diagram.

i need to see a diagram for a 2010 dodge grand caravan with a 3.3 liter It has air condtion

Get the replacement belt, and then note the pulleys that have smooth finish, and note the pulleys that have the grooved finish.

Just 'thread' the serpentine belt, one pulley after another alternating between the smooth and grooved until the last remaining pulley is the tensioner pulley.

Use the breaker bar to allow the pulley to accept the belt, and you're done.

if you buy your belt from Autozone the belt routing is on the box

check serpentine belt tenssioner

how do i take off the old belt tenisoner of a 96 grand caravan 3.8 is the motor

Good morning! I am enclosing a serpentine belt routing diagram to aid in the installation of your serpentine belt. There are 4 different engine possibilities but i have enclosed all. The serpentine belt tensioner is released by rotating in a clockwise direction as shown in the diagrams. Engine configuration will determine what tools you need but the installation is relatively easy to do. Have a great day!

The belt routing diagram is shown on a decal located on thehorizontal metal support above the radiator and under the hood support rod (passenger's side near the coolant overflow tank).
PT Stanley

What engine do you have? The 3.3 and 3.8 engines have a single serpentine belt, and a belt tensioner, so no adjustment is needed. Did you replace the tensioner, and want to know how much to torque it? countrycurt0