Question about 2004 Ford F150

1 Answer

Transmission shift Engine has to be 2000 RPM for the Transmission to shift up you can let up it will change gears. Shifts fine hesitates very slight from direct to OD. Is 2000 RPM Normal

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Ford Master
  • 8,518 Answers

Check for vacuum leaks--especially along vacuum hose that goes to transmission or other hoses that connect near the port that the transmission vacuum line connects at the engine intake manifold. Please reply if you have more questions.

Posted on Sep 15, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

97 eclipse


Starting in about the mid 1980's automatic transmissions changed from fluid shifting to electronic shifting. In other words, your shift is by an electronic solenoid controlled by the computer. There is no Shift cable gong to the transmission. Just wires. You need to look for a loose or dirty electronic connection to the transmission.

Mar 30, 2014 | 2001 Mitsubishi Eclipse Spyder

1 Answer

DEFINITE LURCH IN 1ST AND 2ND GEAR,


This may apply. ...............................

Carry out the adaptation drive cycle road test:

Note: This process must be carried out in normal mode (not sports mode). On a flat road, the transmission fluid temperature must be above 60° C (140° f) and below 100° C (212° f) (vehicle at normal operating temperature will ensure that the transmission fluid temperature is above 60° C (140° f)).
9. Accelerate from rest with light throttle (do not exceed the upper rev limit in appendix 1). 1-2, 2-3, 3-4 shifts must occur with engine speed between the following limits:.
Note: Do not move the accelerator pedal during shifts.

• 3.0L VIN ALL 1800 - 2000 rpm
• 4.2L N/A Prior VIN M96321 1450 - 1600 rpm
• 4.2L N/A From VIN M963221550 - 1700 rpm

10. Continue to accelerate gently to 50 mph (80 km/h) so that transmission shifts into 5th gear.
11. Go into overrun and let the transmission shift down into 4th gear without braking.
12. Brake gently to a standstill and hold footbrake on for at least 15 seconds.
13. This process should be carried out at least five times.

Page 2 of 3 Bulletin Number S307-17
________________________________________________________________________________

Jan 17, 2011 | Jaguar S-Type Cars & Trucks

2 Answers

I just bought a 2001 pontiac grand am se with 99890 miles. I would like to know what rpm is the proper shift point from first to second gear? Mine shifts at like 3000 to 3500 rpm and shifts firmly is that...


Hello,well at what rpm it shifts at of course depends on how hard your pressing the accelerator at that moment,if you floor the accelerator it will shift at higher rpm (red line) but if you take off very slowly it should shift at a much lower rpm....but to answer your question 3000-3500 is a good shifting rpm( if the gauge red lines at 6000-6500 rpm) and firm shifting is a good thing,slow,sluggish and hesitant shifting is a sign of bad things to come from a tranny!! ps keep the engine oil,and transmission oil changed for long life out of your car engine and tranny. good luck and enjoy your new car......yz-maniac.

Oct 12, 2010 | 2001 Pontiac Grand Am SE

1 Answer

Engine drops to low gear then back


change the fluid in the transmission

Mar 13, 2010 | 2000 Nissan Maxima

3 Answers

Shifting problem


sounds like it may be either a converter problem or u got some bad clutches in third in the case you need to go to a tranny shop.

Jan 27, 2009 | 1998 Honda Civic

1 Answer

Rpm overspeed


have the transmission checked out,

quote http://www.aa1car.com/library/2002/bf90222.htm

One of the most common complaints with automatics is fluid leaks. Fluid can leak out of the driveshaft seals, the input shaft seal, the transmission pan gasket, the torque converter or the ATF cooler and line connections. If the fluid level gets low, the transmission may be slow to engage when it is shifted into drive. Gear shifts may be sloppy or delayed, or the transmission may slip between shifts

Oct 23, 2008 | 2000 Ford Expedition

2 Answers

Transmission problem


car out of cruise control flutters or runs rough from 45 mph to 55 mph and once over 55 mph runs smooth. I notice from 45 to 55 the rpm guage moves with flutter or rough running engine. when i put in cruise control it smooths out.

Sep 12, 2008 | 2000 Chevrolet Blazer

1 Answer

2000 Volvo S40


one unit that operates ratio changes and is connected to the engine is that vacuum operated actuator on the transmission
it is possible that that unit is failing , vacuum hose is leaking and that will cause ratio changes as the vacuum varies
run the fault codes to check for wiring problems or VSS or TCM problems as well

Mar 23, 2017 | 2001 Volvo S40

Not finding what you are looking for?
2004 Ford F150 Logo

227 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

fordexpert

Level 3 Expert

5537 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...