Question about Chrysler Town and Country

1 Answer

How do you replace passenger side mirror on 2003 Chrysler Town and Country?

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Chrysler Master
  • 5,763 Answers

If you open the door you will see two screws behind the plastic base remove them and mirror will come off then remove the connector,

Posted on Sep 15, 2010


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Does anybody have a diagram for where the purge valve is located on a 2003 town and country

Look on the passenger side of the engine near the radiator. It will have a single two wire connector and two vacuum hoses joined by a single rubber connector attached to it.

Sep 03, 2012 | 2003 Chrysler Town & Country

1 Answer

We need to install a new eclectronic side mirror on passenger side. and want to find out how to do this ourself, online. Any idea where to go to find this info?

the only place i can think of is go to youtube videos and look there im sure it has videos of this maby not your exact model of car but it will get you going in the wright direction to see if its something you can do on your own.. i hope this helps you..

Jun 02, 2011 | 2001 Chrysler Town & Country

1 Answer

How do you replace drivers side mirror on 2003 Chrysler Town and Country? I can get the mirror off, but I need to know how to access the electrical connector for the power/heat feature. Do I have to lift...

no normaly the connection plug is down a bit and this requires the door panel to come off to get at the multiplug ,nothing simple why the multiplug cannot be behind the plastic trin on back of mirror ?'

Mar 18, 2011 | Chrysler Town and Country Cars & Trucks

1 Answer

The condensation from the AC on my 2003 chrysler town and country van comes back into the passenger side on the floor in the form of water. How can I eliminate this problem?

You need to clear the Drain. It is located on the passenger side firewall toward the bottom. It is normally a piece of tubing bent to face the ground and crimped slightly at the end. Make sure this tube is clear and it should drain to the outside of the vehicle.

Aug 10, 2010 | 2003 Chrysler Town & Country

2 Answers

2003 Town & Country Van- trying to replace the drivers side mirror but can't find the plug inside ... please help.

you will need to remove the door panel the connection goes down about 10 inches from mirror,

Aug 07, 2010 | 2002 Chrysler Town & Country

1 Answer

Hi I have a 2006 Town and Country and I need to replace the passenger side outside mirror. How do I repair this?

take off the door panel on the inside and you'll find bolts that hold it on under there

Jul 04, 2010 | 2006 Chrysler Town & Country

1 Answer

2003 town and country driver side and passenger side power windows will not operate

either burnt fuse or a failed switch in one of the doors...use simple bulb tester and test circuit on ack of each switch to see if your getting current.

Jun 06, 2010 | 2003 Chrysler Town & Country

1 Answer

Looking to replace passenger side mirror on a 2006 Town and Country. Anyone have Instructions available?

    Remove Old Mirror
  1. 1 Open the side door to the Chrysler Town & Country, and find thescrew that holds the side mirror molding in place.

  2. Take the screw out and remove the molding panel that attached around the outside of the power mirror.

  3. Remove the bolts connecting the mirror to the door assembly. If equipped, unplug the power side view mirror wiring harness connector.

  4. Unplug the electric connectors, and pull the mirror out of the molding.

Jun 01, 2010 | 2006 Chrysler Town & Country

1 Answer

Removing and replacing passenger side mirror 2002 town and country van

there should be a triangle shaped plastic section on the interior of the door behind the mirror, check it for a little plastic screw cover to remove it or you may just have to lever it gently to remove it.
once it is off it exposes the mirror retaining bolts which you undo to remove the mirror, I presume it has electric mirrors and if that is the case you will have to find the electrical wire plug for the mirror and pull it apart, replace mirror in reverse order of removing

May 12, 2009 | 2002 Chrysler Town & Country

1 Answer

Can't find A/C filter access to replace 2003

Its right under the glove box at a angle its black you have to get down low to look under the box, slide the black cover off towards you and pull down the filter it will slide out.

Jan 10, 2009 | 2003 Chrysler Town & Country

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

113 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts


Level 3 Expert

78267 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers


Level 3 Expert

814 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides