Question about 1985 Maserati Biturbo

1 Answer

Hello i own a spyder 4200 cabriolet 2002, there appears to be 2 bolts that work within the roof mechanism . its a bolt that screws into the frame of the roof mechanism and it has a round head. It looks like the type of bolt used in the gaskets for boot lids. Its probably a common fault on the cars. Can anyone help me as to wear i can get 2 bolts from as mine have snapped. Many Thx Mark 07956 276 912

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Maserati Master
  • 22,114 Answers

High tensile steel bolts with a star drive in the centre of the head ,not a problem try your local auto factor failing which no doubt your local scrapyard will have buckets of bolts just sort them out till you find what you want

Posted on Sep 15, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Sunroof opens on its own, when driving, just opens about 10th of an inch, you can push on it and it lifts also


it sounds as though the actual glass roof section has come loose from the frame that allows the roof to slide back and forth , try opening the roof half way and see if there are any securing screws/bolts from the glass roof edge to the frame , i've tried to get a schematic but have'nt found one yet , will forward one when i do , hope this helps

Jun 28, 2015 | 2006 Ford Expedition

1 Answer

Torque specs chart


There are three long ones (10mm hex size) that fit into the air cleaner box. Or do you mean the intake plenum or manifold?

Jun 22, 2014 | 2003 Mitsubishi Eclipse Spyder

1 Answer

F150 sunroof will not open


is it the plastic slides with wire on them that connect ot the drain trough? May not be serviced separately. they are available for 2003 Expedition. Don't know if similar.


Drive Cables and Guide Rails Disassembly and Assembly
  1. Remove the roof opening panel frame. For additional information, refer to Roof Opening Panel Frame in this section.
  1. Remove the roof opening panel water trough.
    1. Remove the bolts.
    1. Remove the roof opening panel water trough.
9facde1.gif
  1. Remove the roof opening panel water trough guide by sliding it forward and lifting it outward at the notch in the roof opening panel tracks.
97cefe1.gif
  1. To assemble, reverse the disassembly procedure.

Dec 16, 2009 | 2001 Ford F150 Styleside SuperCrew

1 Answer

Bolts have sheared off on the steering box. How to


This pickup must have been in a dramatic wreck! Jack up the driver's side-front and remove the wheel and inner fender panel so that you can directly access the area. Clamp the steering box to the frame and do the drill/remove process. The old bolt ends may just screw on through when you start to drill (good luck). Use grade #5 or better new bolts.

Oct 24, 2009 | 2002 Ford F250 Super Duty SuperCab

1 Answer

Audi cab roof problem


yes, there should be a manual mechanism winder, usually located in the boot / trunk, it may be behind the lining,

Aug 19, 2009 | 1996 Audi Cabriolet

1 Answer

1995 C220 SUNROOF NOT SEATING PROPERLY


Unfortunatly these roofs are basically a complete unit with cable and frame all in one unit where as previous roofs had replacable components. Assuming yourr roof seal is not torn or damaged you can adjust the glass somewhat. There are 6 torx style bolts that secure the roof to the tilting brackets. I would raise the roof in the pop up position and carefully remove the side bellows(They are also a common failure and can cause roof to bind or not operate to complete rest postion)-they pop out by pulling outward. Just remove the bottom section so you can easily reinstall them. Next loosen the back torx screws( I beleive they are size t20) and push roof up as far as you can and resecure. If only one side is not popping up as far as it should just do that side. Then try resynchronizing the roof parameters by pushing the button untill roof is in forward postion and hold for approximatly 10 seconds-next push button untill roof is in pop up position and hold for 10 seconds. You can also loosen all 6 screws by popping off the plastic trim piece in front of roof and loosening the screws and pushing roof all the way forward. but you will spend alot of time adjusting utill roof is perfect. good luck

Aug 04, 2009 | 2002 Mercedes-Benz C-Class

1 Answer

How to install a rear window regulator on a 2000 Oldsmobile Intrigue


How do you remove door panels and replace window regulator on an Intrigue? Answer : For a 2002 Intrigue – Front Passenger I didn’t disconnect battery. You use window switch later to align window tabs to regulator frame – with ignition off power locks work, nothing is exposed.
1. Remove visible screw under armrest, pop out finger inset oval panel, remove exposed 2nd screw. 2. Pop off door handle trim – lock button assembly slide thru its hole in door panel. 3. Pop off window switch trim/holder – slide thru its hole in door panel. 4. Remove 2 slot screws under bottom of door.
5. I used a smooth metal letter opener (or old fork) to pry panel from door at each point plastic fasteners insert into metal. Start prying a little, see three on bottom perimeter two inches from edge. Three on door open edge and three on door hinge edge. Slow and easy = whole panel will pop off. A metal compression spring fastener connects at top door hinge edge trim – pry out. Be sure door lock and window switch remain inside. Clean all surfaces of door panel and lay on back seat.
6. With panel off you see clear plastic moisture sheet stuck to door with black rubbery paste - peel it from door for reattachment. You now see mechanism and fastener points. Lay out replacement window regulator and motor on mat by door to help you recognize fastening points, etc.
7. Carefully pull glass all way up and hold in place with two pieces duck tape two feet long with ¼# removal tabovers. Put a foot on outside glass and loop over door frame a foot to inside glass – with room to later redo when you twice lower and raise a foot to access bolts removing/attaching it to regulator bar.
8. Remove 3 bolts holding motor to door. 9. Remove upper 2 bolts and lower 2 bolts holding regulator frame to door.
10. Lower window to expose thru panel cutout area two bolts holding glass tabs to regulator, retape securely. Remove bolts, raise window, retape securely by looping over door frame.
11. Window regulator and motor assembly comes out as unit. Unplug window switch tab to release from motor. BEFORE reassembly clean the inside of the door, put in a little Borax for bugs, etc.
12. Reassemble by starting three motor bolts, fitting regulator assembly in door cavity. Replug window switch, motor can be placed in thru oval slots, leave all bolts loose. Replace two upper and two lower regulator bracket bolts, leave loose.
13. Turn on ignition, use window switch to lower window glass regulator tab bracket until accessible thru panel cutout. Turn off ignition, manually lower glass until tabs align with regulator bracket bolt holes and tighten these bolts. Take tape off, turn on ignition, raise window to top.
14. Tighten three motor bolts and four regulator bracket bolts, make sure alignment is OK. Remove your tape residue - clean goo from both glass sides with Goof Off. THEN raise and lower several times to assure all fits and works like new.
15. Reinstall clear plastic sheet, aligning any fastener holes and rubbing down perimeter with a cloth .
16. Align door panel, assure door lock and window switch are pulled thru. Visually align each tab on door opening side and pop them in one at a time. Continue on bottom – make sure you see them align or they will break. Finish on door hinge side and with metal fastener at top. IF you break a fastener, take one from small bag you bought from Pep boys - otherwise take bag back for refund…
17. Reinstall 2 armrest screws and 2 bottom panel screws, then pop in door lock, trim piece and window switch.
Clean the window inside and out with glass cleaner/polish/raineze so it will slide easily and your done. You can’t do anything about the motors going out. You can avoid regulator tab breaks by making sure the window is raised BEFORE closing those big doors – down is the weak moment!! I work slow and clean as I go, the job took two hours. I highly recommend partsgeek.com – saved a bundle over dealer and they shipped everything in several days – as ordered!

Jul 27, 2009 | 2000 Oldsmobile Intrigue

1 Answer

I need to remove the dashboard from a 2002 hyundai elantra


if you are just taking the dash out you do not need to take out the metal frame. make sure you have the passenger air bag bolts removed from the frame. there isnt any screws from the rear.after all bolts are removed you will need to pull on it pretty hard to get the 3 hold in clips to pop off.

Mar 03, 2009 | Hyundai Motor 2002 Elantra

1 Answer

Escort P-reg cabriolet


Yes make sure you use a black window sealant around the seal to prevent leaking, and mak sure not to tighten the bolts to tight as it can bend the frame.....

Nov 26, 2008 | 1997 Ford Escort

1 Answer

Manually retract convertible roof on 95 cabriolet


Open roof latch over windshild.
Raise rear of roof off of hatch
Lift little hatch tabs to access lift mechanism
Release latches on each side with fingers
Lift Hatch with free hand
Let roof fall into storage compartment
Click hatch shut.
Reverse proceedure to put back up.

Aug 22, 2008 | 1995 Audi Cabriolet

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

123 people viewed this question

Ask a Question

Usually answered in minutes!

Top Maserati Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

yadayada
yadayada

Level 3 Expert

75797 Answers

Mike

Level 3 Expert

4336 Answers

Are you a Maserati Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...