Question about 2003 Honda CR-V

Open Question

2003 honda CR-V, location of pcv valve - 2003 Honda CR-V

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
shawn_neal_6
  • 19 Answers

SOURCE: Need location for pcv valve

should be in the passenger side valve cover.

Posted on Dec 20, 2008

Ad
  • 1 Answer

SOURCE: pathfinder 2003 pcv

Here's a screenshot from the field service manual of a 2005 Pathfinder. It shows the rocker cover on the top of the driver and passenger side of the engine. The PCV valve is connected into the back of the passenger side rocker cover. One of the PCV hoses comes out of it, up and back into the intake manifold. Hope it helps..

3dd4974.jpg

Posted on Dec 31, 2008

davesmith_37
  • 94 Answers

SOURCE: where is the pcv valve located on a 2003 ford ranger

  • The PCV valve can be located in several places. The most common location is in a rubber grommet in the valve cover. It can be installed in the middle of the hose connections, as well as installed directly in the intake manifold.
  • Once the PCV valve is located, make sure all the PCV system hoses are properly connected and that they have no breaks or cracks.
  • Remove the air cleaner and inspect the air and crankcase filters. Crankcase blowby can clog these with oil. Clean or replace such filters.
  • Oil in the air cleaner assembly indicates that the PCV valve or hoses are plugged.
  • Make sure you check these and replace the valve and clean the hoses and air cleaner assembly.
  • When the PCV valve and hose are in satisfactory condition and there is oil in the air cleaner assembly, perform a cylinder compression test to check for worn cylinders and piston rings.
  • Posted on Feb 27, 2009

    • 87 Answers

    SOURCE: PCV valve location on a 2003 Dodge Ram pickup, 4.7?

    on the valve cover

    Posted on Mar 10, 2009

    • 7 Answers

    SOURCE: pcv valve location

    more than likely IN the rocker cover.

    Posted on Mar 15, 2010

    Add Your Answer

    Uploading: 0%

    my-video-file.mp4

    Complete. Click "Add" to insert your video. Add

    ×

    Loading...
    Loading...

    Related Questions:

    1 Answer

    Honda crv 2003 brake light fuse


    For a 2003 Honda CRV, disconnect the horn fuse (#7), located in the under hood fuse box. This will also kill the rear lights. My underhood fuse box did not match glvenu's pic above, didn't have the 2 fuses circled together. The #7 fuse in my CR-V is located below the single fuse circled in the pic above.

    Jun 28, 2012 | 2003 Honda CR-V

    1 Answer

    Where is the pcv valve on a 2003 honda civic?


    It will be located on or near of the valve covers .. Its looks like this (B)



    2_8_2012_4_06_39_am.jpg

    Feb 08, 2012 | 2003 Honda Civic

    2 Answers

    Where is pcv valve located on 1989 honda accord lxi


    Locate the air box on the top center of the engine towards the back. The PCV valve is located on the rear, underside of the air box. Although on some Accord models, a small air box bracket may be present, which will block view and access to the PCV valve plugged into the intake manifold. If by chance the bracket is there, then remove the retaining nuts, holding it to the air box side with the ratchet and a socket. Reach onto the intake manifold with a pair of needle nose pliers, and gently pull the PCV hose and valve out of the grommet of the intake manifold. Hope this helps!!!

    Oct 20, 2011 | 1989 Honda Accord 4 Door

    1 Answer

    Need to locate PCV valve on 4cyl. Honda Accord


    It should be on the valve cover. It should b "L" shaped and inserted into a rubber grommit and connected at the top is a vacuum line.

    Apr 26, 2010 | 2003 Honda Accord

    1 Answer

    Pcv valve location


    more than likely IN the rocker cover.

    Dec 29, 2009 | 2003 Honda Accord

    1 Answer

    What needs to be done at 100,000km service for Honda crv 1999


    What I would do, if you haven't, yet is do a total tune up. Change the oil, oil filter, PCV valve, air filter, spark plugs and spark plug wires, timing belt, distributor, and recently I heard that adjusting the valves at that (100,000) point will also prolong the engines life, the timing belt and valve adjustments seem to be the hardest to do. This is what i did to my 1999 honda cr-v except the valve adjustment, Im not good enough to mess with that on my own. Doing it myself turned out pretty cheap, and easy, just time consuming. good luck!

    Oct 08, 2009 | 1999 Honda CR-V

    2 Answers

    Location of a pcv valve on a 2005 honda accord


    The general location mentioned is correct. However, unlike most PCV valves there is no hose connection to the valve. There is a single bolt that attachs the PCV valve to the valve cover. Loosen the bolt, then remove the PCV valve from the valve cover. It is inserted inside the valve cover. Very different from most PCV valves as far as attachment method to the valve cover.

    Apr 08, 2009 | 2005 Honda Accord

    3 Answers

    PCV valve for 2004 Hona CRV


    PCV Valve Operation: 0900823d80049deb.jpgA vacuum-controlled metering device that regulates the flow of crankcase fumes in the positive crankcase ventilation system by allowing more flow at high speed than at low speed, and acts as a system shutoff in case of engine backfire to prevent an explosion in the crankcase.
    Depending on your engine size, the PCV is a different style and slightly different location.

    Usually they are mounted in a hole on your valve cover.... connected by a vacuum tube.
    Some are mounted with threads into the engine block (usually by the oil filter)

    On the '04 Crv - it is nearly inaccessible behind the AC compressor and beneath what looks like an old vacuum advance. Most PCV valves today do not need to be replaced, unless there is actual valve failure, which I have not seen happen. I would not be concerned about replacing it.

    Thanks for using FixYa - a FixYa rating is appreciated!!

    Feb 21, 2009 | 2004 Honda CR-V

    1 Answer

    Location of the PCV valave in the 2002 Honda CRV


    pcv valve should be located on the valve cover..but some new vehicles don't have one it is built into the valve cover itself..

    Dec 01, 2008 | 2002 Honda CR-V

    Not finding what you are looking for?
    2003 Honda CR-V Logo

    Related Topics:

    457 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Honda Experts

    yadayada
    yadayada

    Level 3 Expert

    76846 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22246 Answers

    Kevin Daniels

    Level 3 Expert

    1455 Answers

    Are you a Honda Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...